Xerox wc 5335 Scan to PC Sharing

To enable scan to PC sharing on a Xerox WorkCentre 5335, you typically need to follow these steps:
Access the Web Interface:
Open a web browser and enter the IP address of your Xerox WorkCentre 5335 in the address bar. You can find the IP address by printing a network configuration report from the printer.
Log In:
Log in to the web interface using the administrator credentials.
Configuration:
Navigate to the Scan/Email tab or a similar menu option, depending on the printer's firmware version.
Scan to PC Setup:
Look for the Scan to PC setup options. This is where you'll configure the settings for scanning to a computer.
Create a Profile:
You may need to create a new scan profile. This profile will specify the settings for scanning to a PC, including the destination folder, file format, and other preferences.
Configure Destination:
Enter the network path or the shared folder location on your PC where you want the scanned documents to be saved. Make sure the folder is accessible from the printer.
File Format and Settings:
Set the file format for scanned documents (e.g., PDF, TIFF) and adjust any other scan settings such as resolution, color options, etc., as per your requirements.
Authentication:
Depending on your network setup, you may need to configure authentication settings, such as a username and password, to access the shared folder on your PC.
Save and Test:
After configuring all the settings, save the scan profile. You can then run a test scan from the printer to ensure that it can successfully scan and save documents to the specified PC folder.
Please note that the exact steps and terminology may vary slightly depending on the specific firmware version of your Xerox WorkCentre 5335. It's essential to refer to the printer's user manual or documentation for detailed instructions specific to your device.

[@martinandrews4838]

Very informative but too fast and blur i cant see anything