She’s an amazing ride ! I can’t wait for the comeback and fastest fwd prelude title. Another fun fact was this engine ran in my crx also for a few years. 😂 the back up to it is in Goofy Shane’s CRX
Take a minute and appreciate HOW GOOD the prelude sounded on that last run. She might have gotten hurt getting close to that 9 but holy crap did that last run sound like one hell of a Banshee
@@802Garage in the end, nobody cares. That’s the whole point of pushing cars in drag racing, If you never blow a motor then you aren’t trying at all.when ur making passes at 30-40 psi there’s only so many passes you can make before the engine needs a re build
@@CorruptInfinityOfficial I was making a joke about how the tune didn't upload because the laptop died and so they didn't make it into the 9s. Not sure if you took my comment as negative somehow.
When my buddy's '96 Prelude with the H23 in it threw a rod, that's the exact place where it made a window, except it was all the way through and it made a nice 2" hole. He paid $800 for the car so he was like meh, I'll just replace the motor and then flip it. He was over the car by that point. We replaced that short block with one that was supposed to have been a bent valve in the head from a thrown timing belt. Turned out that it broke the crank between #1 & #2 cylinders. When I started it up it actually ran because it was broken part way through the fat part of the crank, so it was actually still pushing cylinder #1 around, but it made a hell of a racket. Ran it for a few seconds, then shut it down. Checked everything, found nothing wrong so started again, super loud clacking, shut it down again. Pulled oil pan and found the broken crank when turning it over by hand. It was 33 days after we bought the short block too so the yard we bought it from shafted us on it because it was past the 30 day return window. I can't remember where we got the 3rd block from but we drove all the way to Gary Indiana from Buffalo to buy one and the dude turned out to be a scammer and we never got that motor. I can't remember where we finally found one, but it was a really hard to find motor. IIRC I think the machine shop we talked to about maybe frankensteining the two blocks together found one locally. We were trying to take the block with the bad crank and put the other crank in it, but that block was too far gone too. The crank clearanced itself into the casting. We got it all together and running, then painted the car after that to try to squeeze a few more bucks out of the sale. I was in on the deal at this point and we were going to split the "profit". My father was driving past it with a fork lift a few days after the paint was done, and dropped a metal cabinet on the freshly painted hood. That paint job looked so good before that. After we redid the body work and re-shot the hood, we took it out for a spin and the throwout bearing blew apart which took out the clutch fork. We fixed that and finally just put it out to the road for sale with a couple other little things wrong because we were so sick of working on it. A couple months later it hadn't sold yet and some dude lost a cinder block off the back of his flatbed and skated that across the top of both front fenders and the whole hood. Somehow we ended up still finding a buyer for the car in that condition, and even with the jacked up hood, he ended up giving us over 4 grand for that car. I mean the paint still otherwise looked amazing but we were both surprised. By that point we were ready to cut our losses and move on. My buddy has OCD with stuff like this so he went through every last receipt we had and even got a rough estimate of all the gas we used on trips and electricity in the shop. We broke nearly dead even on the deal. I think we made $40 on it, so we went and bought some burritos and beer with it to celebrate our narrow escape from that nightmare. That 'Lude was cursed.
🔥🔥🔥10 years / 10 seconds sounds perfect to me man. Guess it's time to get to boosting. Good luck on the record I am sure will be hot on its trail soon enough🔥🔥🔥
I know the engines screwed but for your future self fit a small inverter in the car to power the laptop, I did it a few years ago and I’m glad I did, has helped me and a lot of people at the track
Shoulda fixed the tps sensor right and let Brent drive it...he deserves it...working on everyone's cars getting them ready 24/7 n rarely gets to go down the track.....
You can tell Brent was really bummed out to see the prelude motor go! He probably has more of a connection with the car than Kyle does since Brent built that motor. I say do another h22 with a b series trans. Or better yet do an f20b swap, b-series trans, and turbo the shit out of it
It's turning out to be a super expensive summer for poor Kyle. Mr2 gets built motor, van loses tranny, and the prelude loses motor hopefully you'll take some time to buy some merch so we can see these hot rods get back in to fine running form.
@@chrishenry3102 ad revenue from content certainly brings in a bit of money but there is a lot of money to be made from merch sales as well. In fact youtubers can increase there revenue by 10 times with the addition of merch.
Would be cool to see a throw back budget build but that’s not gonna happen with the prelude. It’ll most likely either get the mr2 all out treatment to go for a record, or sit ignored gathering dust
The Prelude got it's 9 itself a 9mm crack in the block until he pops the top of the engine off and we will all get to see the internals all mangled up like the engine block turned into a blender and blended up all of the engine internals like a Margarita or a Pina Colada
I think Kyle really grew up when he decided to redo the MR2 and didn't just throw it in and hope for the best. Would love to see the same detail put into the Prelude, the Hatch, and the Minivan.
He’s definitely grown creatively and as a person over the past few years. No longer is it the days of Kyle doing all his work in single and dual car ports/garage. Those days are long gone. We should all aspire to grow like that in our own hobbies.
the minivan is already pretty solid, the only issue is the transmission/dif, that they're working that out. the hatch will be a monster of a set up, but it shows how hard it is to find H series parts, problem that haunts the 'lude as well
It's a blessing in disguise, proved that PFI and Brent could build a great race car even a decade ago. Bring it up to date and chase the Prelude record.
Those of us that have been going to PFI already knew that but when you have people that cheap out and buy used or not good parts It can totally ruin a builds potential that's why they can only do what the customer pays them to do
Maybe true. But TH-cam has enabled the whole world to see this. Through channels on here like 1320video we discover fast cars and people like Kyle & Boosted Boiz channel. We don't have a PFI speed shop in Australia. 🇦🇺👍🇺🇸But we love to watch Brent and see him and his crew work on hot rods.
damn... the look on brents face when he found out how bad she blew, it looked like he lost an old friend, kinda tugs at the heart strings cuz brents such a good guy, its like he saw the end of an era
The Florida man videos are sweet and all. BUT I love me some O.G home track videos with all the homies helping out. It is a vide for sure. Sending some love from BONGMONT the local guy will know where that is. 🤤🤤🤟
@@Matty.Hill_87 nah Colorado is pretty great and Florida summers are brutal. Way better to have someone in Florida to visit when it's cold here and come back for spring summer and fall until dragstrip closes
Hate to to see it happen. Knew it was gonna happen eventually with as much oil pump trouble as you were having. This was my favorite car you had. Hopefully it comes back better than ever and gets the prelude record with an H series.
She’s an amazing ride ! I can’t wait for the comeback and fastest fwd prelude title. Another fun fact was this engine ran in my crx also for a few years. 😂 the back up to it is in Goofy Shane’s CRX
Hell yeah brother let's gooooo
Is sho enough methanol injected ?
With your help she will be right back out there Brent! Keep on doing great work!... rooting for Shane as well!
What’s up with Sho ‘nuff??? Asking for a friend
K-Lude
The guy made $100 bet when he hasn't even made a full pass on his car yet 😂😂
That's why we love yah Shane 🤙
Confidence will get you much farther than you think
They don't call him goofy built for nothing💪😄
That was plain dumb
The definition of "send it"
I’m dead 😂
Take a minute and appreciate HOW GOOD the prelude sounded on that last run. She might have gotten hurt getting close to that 9 but holy crap did that last run sound like one hell of a Banshee
You know what they say, they seem to run the best before they blow up lmao
Probably because no oil pump it was extra pissed off lol
In the end, it was the technology that failed them!
@@802Garage in the end, nobody cares. That’s the whole point of pushing cars in drag racing, If you never blow a motor then you aren’t trying at all.when ur making passes at 30-40 psi there’s only so many passes you can make before the engine needs a re build
@@CorruptInfinityOfficial I was making a joke about how the tune didn't upload because the laptop died and so they didn't make it into the 9s. Not sure if you took my comment as negative somehow.
I'd say you got every penny out of that 5 grand. Prelude owes ya nothing!
500 dollars a year for a badass prelude. Not bad at all
When my buddy's '96 Prelude with the H23 in it threw a rod, that's the exact place where it made a window, except it was all the way through and it made a nice 2" hole. He paid $800 for the car so he was like meh, I'll just replace the motor and then flip it. He was over the car by that point. We replaced that short block with one that was supposed to have been a bent valve in the head from a thrown timing belt. Turned out that it broke the crank between #1 & #2 cylinders. When I started it up it actually ran because it was broken part way through the fat part of the crank, so it was actually still pushing cylinder #1 around, but it made a hell of a racket. Ran it for a few seconds, then shut it down. Checked everything, found nothing wrong so started again, super loud clacking, shut it down again. Pulled oil pan and found the broken crank when turning it over by hand. It was 33 days after we bought the short block too so the yard we bought it from shafted us on it because it was past the 30 day return window. I can't remember where we got the 3rd block from but we drove all the way to Gary Indiana from Buffalo to buy one and the dude turned out to be a scammer and we never got that motor. I can't remember where we finally found one, but it was a really hard to find motor. IIRC I think the machine shop we talked to about maybe frankensteining the two blocks together found one locally. We were trying to take the block with the bad crank and put the other crank in it, but that block was too far gone too. The crank clearanced itself into the casting. We got it all together and running, then painted the car after that to try to squeeze a few more bucks out of the sale. I was in on the deal at this point and we were going to split the "profit". My father was driving past it with a fork lift a few days after the paint was done, and dropped a metal cabinet on the freshly painted hood. That paint job looked so good before that. After we redid the body work and re-shot the hood, we took it out for a spin and the throwout bearing blew apart which took out the clutch fork. We fixed that and finally just put it out to the road for sale with a couple other little things wrong because we were so sick of working on it. A couple months later it hadn't sold yet and some dude lost a cinder block off the back of his flatbed and skated that across the top of both front fenders and the whole hood. Somehow we ended up still finding a buyer for the car in that condition, and even with the jacked up hood, he ended up giving us over 4 grand for that car. I mean the paint still otherwise looked amazing but we were both surprised. By that point we were ready to cut our losses and move on. My buddy has OCD with stuff like this so he went through every last receipt we had and even got a rough estimate of all the gas we used on trips and electricity in the shop. We broke nearly dead even on the deal. I think we made $40 on it, so we went and bought some burritos and beer with it to celebrate our narrow escape from that nightmare. That 'Lude was cursed.
Just shows the true testament of Hondas. She took lots of abuse over the years with a smile. Make her happy again Kyle she deserves it.
Congratulations on the million subs. When you and your family gets together it’s always fun. Enjoy all of you guys.
🔥🔥🔥10 years / 10 seconds sounds perfect to me man. Guess it's time to get to boosting. Good luck on the record I am sure will be hot on its trail soon enough🔥🔥🔥
I know the engines screwed but for your future self fit a small inverter in the car to power the laptop, I did it a few years ago and I’m glad I did, has helped me and a lot of people at the track
Man that was a hell of a setup in the prelude now its time to see the aftermath of the inside the motor
Shoulda fixed the tps sensor right and let Brent drive it...he deserves it...working on everyone's cars getting them ready 24/7 n rarely gets to go down the track.....
The prelude seems to scare you more than the Mr2 you can just see it in your face
hondata just dosnt cut it anymore. Maxxecu or fuel tech! lets GOOO
Rip to prelude v1! Bring on v2! Please don't k swap it build another H series and chase that record! Once you are on fuel tech too she'll eat!
She couldn't have done better man, she did everything you asked. Time to make her great again!!
Firmware update while running on battery, typical BoostedBoiz fashion.
You can tell Brent was really bummed out to see the prelude motor go! He probably has more of a connection with the car than Kyle does since Brent built that motor. I say do another h22 with a b series trans. Or better yet do an f20b swap, b-series trans, and turbo the shit out of it
Why not an F22b?
New engine and Fuel Tech for the Lude WR 😎
"It's either gonna break more or not"
The famous last words before BOOOOOM💣🤯💣💥🔥
I miss the 4th gen prelude sooo much hopefully one day I will get a chance to own one again and I will never get rid of it
It's turning out to be a super expensive summer for poor Kyle. Mr2 gets built motor, van loses tranny, and the prelude loses motor hopefully you'll take some time to buy some merch so we can see these hot rods get back in to fine running form.
Lol, it's content to make more money.. do you have any idea how much he's making now off TH-cam and merch lol
@@chrishenry3102 ad revenue from content certainly brings in a bit of money but there is a lot of money to be made from merch sales as well. In fact youtubers can increase there revenue by 10 times with the addition of merch.
do a freaking J series prelude bro!!! that'd be sick, Just don't go K in the lude Kyle, K's are cool and all but they ain't cool in the lude!!!! lol
I just don't dig the j series. I'd like to see something no one builds anymore. 👍✌️
There's enough turbo K series on this channel, shits boring now.
@@scottgilchrist5659 Yea like I said I wanna see something no one does anymore like another H22A1 or a F23
I agree but putting another H instead of a K makes no sense
J series would be cool. The prelude is pretty heavy.
Amazing car do not give up on this car
Lots of potential.
itd be cool to see a old school boosteed boiz rebuild just ebay parts and a junkyard engine just to breath a little bit of life back into it
Would be cool to see a throw back budget build but that’s not gonna happen with the prelude. It’ll most likely either get the mr2 all out treatment to go for a record, or sit ignored gathering dust
sad to see it go back into hibernation but glad to see it run one last time before v2
10 years old cant even be mad man incredible it lasted that long. TIME TO K SWAPP IT
Since there's more boost in 2nd gear the 1st gear "sounds" like the 1st gear is longer. the lude is insane! @ 16:06
Time for a K series sequential box. Lude 2.0 might see 8’s with that set up.
Good stuff guys get thoses records love the prelude
Fav Car youtuber. Always waiting on your video bro.
I haven't watched the video yet but I really hope you keep it H series.
Prelude should be flordia bound for the winter
This prelude need the record.
Brent: dang it, this sucks.. he looked so sad.. lol.
🇺🇸🤘🤘🇺🇸
RIP Prelude in pepperoni. sad.
Throw the odyssey's old h22 long block to keep on ripping it in the prelude
"This things an antique, but still works!"
This really didn't age well
Those famous last words 🤣 9:07
He jinxed himself when he said they did nothing to the motor
Shane should have been named brent jr bc dude is just like his dad LMAO
That gearbox comment was funny ass hell whaha.
That’s a reliable sob you’ll get her back in no time 💪💪💪
Let's see how many world records Kyle can break
Kyle's driving is so much better now, he got everything the Prelude had in her out of her may she RIP for now.
I have an h22A4 just sitting in the garage!!
Awwww shoot. Just finished PFI’s video from this morning.
Killed it in true fashion
There's a Friggin' SWEET vega in the background around 0:40
That was awesome 😎
Sounded like it screamed 2nd hear more than normal. Maybe that was the pump giving up
imagine if the laptop didnt die. that saved the oil down the track. always a sad day when an OG goes down tho but the lude 2.0 is gonna be nasty!!!!!
Congrats on a mil brother, you deserve it!!
as we say in the UK, give the old girl a birthday :)
Fueltech is all I'm going to say ..
She went to the moon for sureeee Boiz 🤣
Need to fix the e-brake to get that record… you destroying the time slip by rolling out the beams
You need a power bank or a emergency battery of some sort. 🔋
Got dam she was on a pass that last run! It’ll be back stronger than ever bro!!
i love how this blew up the same time mines did...
Noooooo so close to a nine can't wait to see it come back and do some eights
PFI needs a hotspot in their trailer for the laptop!!
Race break build again fuck it shit happens its awesome seeing u with Brent again 👍
Pull her motor put it on a shelf like a trophy.
I love Wyatt
World record time ! Lets Go !
i think its safe to say the tune did not save and in fact did corrupt
Tbh honest, prelude never got her day. You zip tied it to this point 😂
Say hello to uncle Rodney for me lol
Kyle: "we're knockin the dust off"
Prelude: "uuuuhhhh uuuummm... more like knockin the rods out"
He knockin the rods out the bottom of her 😂😂😂😂
Lol
10.0 in the Prelude oh so close to one last 9. Now it’s parts gathering time to make it even quicker 💥💥
Kyle: " I hope she can pop off a nine tonight"
Prelude: "oh I'll pop something won't be a nine though 😏"
The Prelude got it's 9 itself a 9mm crack in the block until he pops the top of the engine off and we will all get to see the internals all mangled up like the engine block turned into a blender and blended up all of the engine internals like a Margarita or a Pina Colada
@@keefespencer1173 def Pina Colada with the oil/water mixture
Bout 9. Bout 900 bucks lmao
Laptop tried to tell you the prelude was done for the day
The amount of 3-2 shifts its survived though. Strong build on that old girl.
Yup, and only oil pumps where killed, thats crazy.
I think Kyle really grew up when he decided to redo the MR2 and didn't just throw it in and hope for the best. Would love to see the same detail put into the Prelude, the Hatch, and the Minivan.
Would love to see it
He’s definitely grown creatively and as a person over the past few years. No longer is it the days of Kyle doing all his work in single and dual car ports/garage. Those days are long gone. We should all aspire to grow like that in our own hobbies.
The hatch is gonna be the way more epic in my opinion. The OG car deserves the most. That or wago in the 7s lmao
the minivan is already pretty solid, the only issue is the transmission/dif, that they're working that out. the hatch will be a monster of a set up, but it shows how hard it is to find H series parts, problem that haunts the 'lude as well
a big part of this is wyat
It's a blessing in disguise, proved that PFI and Brent could build a great race car even a decade ago. Bring it up to date and chase the Prelude record.
Those of us that have been going to PFI already knew that but when you have people that cheap out and buy used or not good parts It can totally ruin a builds potential that's why they can only do what the customer pays them to do
Maybe true. But TH-cam has enabled the whole world to see this.
Through channels on here like 1320video we discover fast cars and people like Kyle & Boosted Boiz channel.
We don't have a PFI speed shop in Australia. 🇦🇺👍🇺🇸But we love to watch Brent and see him and his crew work on hot rods.
PFI blows chunks
@@nickkennerley4812 Ya um…..I’d have to disagree with you there buddy on that.
Even on her death bed she still held up enough not to oil down the track she is such a trooper.
Prelude 2.0 is gonna be sweet
i hope he stays H22
but I am so hyped to see the fueltech, 2021 Kyle-budget turbo setup, and an absolute beast of an H22 in version 2.0
damn... the look on brents face when he found out how bad she blew, it looked like he lost an old friend, kinda tugs at the heart strings cuz brents such a good guy, its like he saw the end of an era
🥺🥺
Would've been amazing to go 9 on original setup, bet it could've done it
I saw that. Could hear it in his voice too
He built it a decade ago so it probably meant a lot to him
Not gonna lie man.. your picture got me good 🤦🏼♂️
She did great and now it's time for her to be complete.
The lude will live to rip another day...this car will never die!
@@cleartape229 for you and the girls
The way Jamie goes “I was FLASHLIGHTING FOR YOU” then scooters away 🤣🤣🤣 20:48
21:15 **
Prelude: a piece that precedes a more important movement.
Nice! Where can I find word definitions?
@@eriklarson9137 like, a dictionary?
Hondas are so damn tough. A decade of pinging the limiter in every gear every pass, that thing took some real punishment.
not to mention hitting 12 grand a few times money shifting 3rd and blowing the oil pump.
@@sirmonkey1985 more than once! That was one stout setup.
Hell yeah she has been battling for a whole decade and went out fighting like the warrior she was. You guys will bring her back even better!
K swap? 😅
@@jordanpalm6526 nah, that would be bs, almost everything is k swapped, the h series is the character of the lude
@@jordanpalm6526 nah, H series all the way.
The Florida man videos are sweet and all. BUT I love me some O.G home track videos with all the homies helping out. It is a vide for sure. Sending some love from BONGMONT the local guy will know where that is. 🤤🤤🤟
I think Kyle realized how he missed it here this trip
Needs to convince Brent to be a Florida man.
@@nikyjim Florida is for scumbags.
Pfi should just move to florida as well
@@Matty.Hill_87 nah Colorado is pretty great and Florida summers are brutal. Way better to have someone in Florida to visit when it's cold here and come back for spring summer and fall until dragstrip closes
Take the prelude back to Florida with you and give it the makeover it deserves
I wish you would bring the prelude with you back to Florida please bring it back to Florida
No because last time he brought the “Lude” to Florida he lost the hood on the way. Next time he’d lose the whole damn car.
@@cruzin3093 he’s not going to loose the whole car if he straps the car down to the trailer
@@travisreising3972 i think it was suppose to be a joke
man I can't wait to see Shane make a pass. that dude puts in work. he's going to be so happy when he does
Yea, Shane has been working his ass off on that car. When he gets a clean trip, it's gonna be wild! So stoked!
That was a 9.9 pass all day...but dammit it was a vikings death...She went out in battle and she will rise again to be faster. Great video, boiz. 👊
22:34 “A dollar a day keeps the rods at bay”
Yooo!!!!
The camera quality is awesome!!!
Let’s go!!💪🏼🙏🏻❤️🤣🤣
I like that goofys windshield is just as dirty as his glasses.
that h series is something surviveing 10 years of beat down and at the end goes out like a champ with a 10.0
Would be great to push this into the 8.9’s. World record prelude and a head start with the hatch 😎
Hate to to see it happen. Knew it was gonna happen eventually with as much oil pump trouble as you were having. This was my favorite car you had. Hopefully it comes back better than ever and gets the prelude record with an H series.
Man so freaking close! It did the 10.06 finishing on 3 cylinders. If it hadn't let go, that would've been a 9 no doubt. Holy crap
I like how the sharpie trace is still on the hood. oG bro.
That og hood with the pfi exhaust ring is sat on someone's garage wall somewhere I garuntee it
I can't wait for the lude, van, and hatch to get the same treatment at the MR2! Boostedboiz are leveling up!
I am going to go order something off the site just so I can see this car go in the 8s. Thanks for the content keep up the good work Boiz
They always run soooo well before they die :/ she'll be back better than ever though!
By far my favorite car on the channel
I can’t wait to see her make a come back!
Should make the prelude rwd, imo the prelude has always had a rwd look to it
Nah fwd ftw and keep it h series
Always thought the same thing. Even more so with model after this one.
@@Inamission303 or an f20b swap
Rwd h