How to Replace Door Lock Actuator 05-10 Pontiac G6
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/21/j/...
In this video 1A Auto shows you how to repair, install, fix, change or replace a broken or snapped rear power door lock actuator. This video is applicable to the Pontiac G6 years 05, 06, 07, 08, 09, and 10.
This process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oss/1AX...
• Door Panel Removal Tool 1aau.to/oV/1AXA...
• T25 Driver 1aau.to/odu/1AX...
• T30 Driver 1aau.to/odu/1AX...
• Flashlight 1aau.to/or/1AXA...
• Putty Knife 1aau.to/oax/1AX...
Subscribe: / @1aauto
Check out our playlist:
Pontiac G6 2005-2010 1st Generation: • Pontiac G6 2005-2010 1...
For More Info visit us at 1aau.to/h/EC/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Quite a bit more complex than I was hoping but thank you for the great vid.
Thank you, this detailed info is invaluable if your a person needing to do this job (which is me today watching this video)!!! Thank you.
I appreciate you posting this. I had to change the driver side latch on my wife's 06 Grand Prix. Not exactly the same but after some swearing and tears, I did get it back together. Your video helped with several of the important steps. Thank you.
Wow. I think this is possibly my problem that I just encountered. Put the car in park and my door didn't unlock nor does my clicker work. You hear the clicker engaging something but it's not locking or unlocking. Had to use my key. The video is very detailed. I've come to this video site before for my mom's car and ordered a part from 1A. Great videos and great customer service. This company is the real deal.
On the other hand....I would gladly pay a GM dealer or mechanic to do this task for me. It looks tedious.
My problem is with the rear door lock actuators on my 2009 Pontiac G6, is the actuator a universal part for all the doors or is it just door specific? I found this video very helpful because I have a guide on how to take apart my door and to not crack or miss anything.
We currently do not carry this particular part, they might be side specific.
Wow! It's a lot of steps but very clear instructions. My dad has a 2008 so we should be able to do this. Thanks so much!
Thanks for invaluable assistance
do you haVE a video replacing rear door actuator that my problem thx
(Smiling while driving around with a fixed door lock actuator but no outside handle.) :)
+Chadwick Dunn Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
my rear door lock dosent do you have a video for that
thanks man. this video showed me how to replace my driver side key lock assembly on my 2007 G6 GT 3.5L coupe.
+Dan Camp thanks for watching. 1aauto.com
SUPER .. Super Vid, the actuators due very alot from Buick to Pontiac, recently did a re & re on a Buick, so this Vid will save me time as i need to do one on a 2007 Pontiac G6 ... Thank You For The Vid.. Well Done - A 1 for me 1 A ...
Your establishment has many educational & very informative vids that i have watched prior to doing a job..
so again, my hat goes off to 1 A Auto Parts..
+Leo Legault Thanks for watching. 1aauto.com
great video guys make sure you do exactly he say i broke one of pins and i damage the part good thing there is junk yard pull a part close to my house pay only 22 dollars and i got it right the second time it was hard i will recommend to fine a cheap mechanic to due for you
Thank you so much for these demonstration videos.
I have an 08 Cobalt... I wonder how closely the G6 matches the Cobalt. I can't find any videos for replacing the door lock actuator for a Cobalt.
My problem is the aftermarket replacement doesn't have the same connection for the door handle cable. The stock one slides in like in your video. The aftermarket actuator has a circle for a cable to slide through. From what I have found all the aftermarket acuators have the round circle for the cable. Any suggestions how to make the stock cable work?
great videos, there is no better or best ones ever
The door lock actuator may be bad. When the go bad, it usually gets a little tougher to lock and unlock them lock. 1aauto.com 888-844-3393
you may be able to get one from the dealer, or if you have a telescoping magnet, you should be able to get it out with that. Hope this helps you out. 1aauto.com 888-844-3393
06 grand prix; same door. video was hugely helpful. does the actuator need to be aligned to the striker in some way. have done the job twice, everything works properly till i put finishing touches. close the door and cannot reopen in any way!
+malcolm simmons Thank you for checking us out. The actuator should install one way onto the striker if necessary. It could be that the actuator once connected is defective and causing you not to open in anyway. 1aauto.com
That's great I think I have all the info I need to fix my car now all I have to do is get parts for it thanks so much
Do you have this same video, but for the rear door?
I bought a replacement door from a salvage yard. Do I have to go thru all that just to swap out the tumbler?
I thought this would be a pretty simple thing to do myself, but I fix computers not cars...I could probably get it apart, but I would NEVER get it back together!! Could I bring something like this to a regular shop or would I need to go to a dealer?
Hi! I had a question. The only problem we have is the drivers door wont open from the inside. All other doors work. And when I pull the driver side handle lights on the dash flicker....do you think it is still the actuator?
My problem on my wife’s 2008 Pontiac G6 is both rear doors wont lock or unlock with the remote control or the lock buttons inside the car. Would this be caused by a bad actuator as well?
Thanks!
Hey I have a question if someone can please answer! I have a pontiac g6 2006. When my car is on the driver's side door won't lock. All the other doors do. But when the car is off the door does lock when I hit the lock button on it. What could be the issue. I just put on a new little unlock lock button but it's still doing it. Please and thank you
The problem with my g5 power locks is that they only work the first time, and move like they want to unlock any time i try to lock or unlock after that. i figure its the lock actuators (both sides) but have read of ppl replacing them and having the same problem.. is it a fuse or electrical issue instead?
So my actuator is junk but the door is closed and won't open. Any suggestions to be able to get the door open to replace the actuator . It looks hard enough to do with the door open , probably impossible with it shut. Its a 2010 g-6
If doing the passenger side you don't have to remove the door handle assembly . Just reach in and free the rod from the yellow retainer and save yourself some work .
I can barely tie my shoes.... So this should be easy 👍🏾
I omitted lock and other linkage
My 2008 Pontiac G6 the window roll up and down when you crank the car put it in gear start driving the not roll back down
Thanks for the great video, can you tell me the part number the front driver door actuator. I have a 07 G6
+Rene K. Plymouth Jr. We do apologize but we do not have that information.
Thank you guys for all that you do. Your videos are very helpful. Quick question, is it possible to replace the actuator without having to remove the door handle? Thanks again
When i tried to put in the torx screw for the door handle, it fell down into the door; is it possible that I can get replacement screws for them?
Thanks for watching. 1aauto.com 888-844-3393
Hi I need to replace the actuators for both of my rear doors on my 2008 Pontiac G6. Do you have or can you make a video on how to do this? I have both of the replacement actuators just not sure how to replace them on the rear doors. Thanks
Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. Thank you for watching!
1aauto.com 888-844-3393
It may be a similar process if it isn't the same. 1aauto.com 888-844-3393
Stereo staying on when I open driver door could it be the actuator
I'm paying someone to do this OMG too much work.
Pontiacs since 1968 should have never been made they are the away cars I seriously considering junking this piece of trash over a door lock acuator isnt this a safety related part why isnt there a recall
Be nice to put more emphasis on where and what configuration as during disassembly there is no way to see how they attached
Do you have a video showing how to change a door lock actuator on a 2008 Pontiac torrent?
+Jorge carrejo Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?TH-cam&CTA%20Comment& 866-403-3393
I have that exact problem in your video. I went on your website but I can't find the replacement part. I have a '09 Pontiac G6. Is the part compatible from another model?
We currently do not carry this particular auto repair part. Thanks for checking us out. Have a great day! 1aauto.com 888-844-3393
The driver side rear window will not roll down on my g6 convertible. I don't know how to take the panel off to see what the problem is. Can you help?
+ksmith1984 g We do not have a way of being able to diagnose the issue that you are experiencing with your vehicle but suggest taking it to a local mechanic for a proper diagnosis.
What is this for?
Will this work for my situation with my G6...
When we press lock on the left or right doors all doors lock except for the right one... Idk how to fix that please help
If there's power going to the door lock actuator and it isn't working, more than likely the door lock actuator has gone bad.
Gt G6 replacement car lock door opener remote program remote
My doors won't stop going off sounds like they are trying to lock but are unable to. I try to lock them they instantly unlock and they start going crazy whenever they want. Idk what to do or how to fix this.
+ddwe Thank you for checking us out. It sounds as if your door lock actuator is faulty and needs to be replaced. 1aauto.com
Hello, I changed the passenger lock and now the 2 back do not work, what could this problem be?
+Boris Díaz We recommend getting your vehicle diagnosed by a mechanic. Thanks for checking us out!
Do you no longer carry this part? I cannot seem to find it on your website.
+Kyle Covack Hello, Kyle! Thank you for watching the video, but unfortunately we no longer carry the power door lock actuator for this vehicle.
Do you have the part number?
+@reynolds178340 Shop for New Auto Parts at 1AAuto.com 1aau.to/c/21/j/power-door-lock-actuator
how do i adjust hood latch
what is the part number for the door lock actuator?
Thank you for watching! Please call us at 888-844-3393 and talk with our sales staff. They will be able to assist you with any questions you may have.
888-844-3393
What tools are used in this video?
+Lacking.Normality Thanks for watching! Please check out the video description for the list of tools you'll need for this repair! 1aauto.com
can this end up keeping my stereo on? if its broken
Did you figure it out I'm having the same problem
I have done this twice and 1st time my car would not lock. So worked on it again today and still not able to get to work and noe door is locked shut and won't open. By any chances a visual. I know I watched the video n repeated steps but still no success.
I get lost on the part where the arm gets removed. You show you latch it on but not sure where.
This is ridiculously detailed. The dealer wants $500 for this fix.
This is the worst car design I swear