Limp mode is so frustrating. My last 4 out of 5 races it’s gone into limp mode. After plugs, boots, and a coil, I think I figured it out to be a dirty MAF sensor. Nice race none the less!
For sure RWF, this seems to happen whenever you are following close. I think majority of it is the fine spray coming from the quad in front and it’s being vacuumed into the radiator from underneath clogging it slightly.
Good effort, the limp mode deal sucks. Is it an overheating issue that shuts it down or other sensor? Just spitballing here, considered a radiator relocate kit or even trying the XMR to see if that helps?
Seems every time he is racing someone close the radiator will clog quickly. I think most of the debris comes from underneath and the fans we run pull a lot of air so it acts like a vacuum for the fine mist coming off the tires from the quad in front of you. We are going to seal this up to see if this helps. Thanks Bryan🏁
@@randomlano1025 yes its cross country racing which many of them turn into mud races so it would be a bad idea to move the radiator up high? Or even run an xmr setup at the mud races? Yeah that would just be stupid! Smdh.
I asked Brandon if he had seen the banner and he said he didn’t ☹️ . He was probably too busy trying to keep between the trees😎. A big Thanks for your support 🏁
Amazing speed that you guys race at pushing to the limit. Just incredible!!
It is truly amazing. Theses guys are pushing the bar to its limit for sure🏁. Thanks buddy!
U guys rip! Always enjoying watching u in person…..
Thanks Country, appreciate the support 🏁
You definitely have the inside/outside lines dialed in the field sections. Great to watch!!
Thanks Brainy141, Brandon was digging for sure 🔥
Limp mode is so frustrating. My last 4 out of 5 races it’s gone into limp mode. After plugs, boots, and a coil, I think I figured it out to be a dirty MAF sensor. Nice race none the less!
Man… I thought you were just waiting for me to catch up! You were in limp mode?!?😂
😂👆
For sure RWF, this seems to happen whenever you are following close. I think majority of it is the fine spray coming from the quad in front and it’s being vacuumed into the radiator from underneath clogging it slightly.
Good effort, the limp mode deal sucks. Is it an overheating issue that shuts it down or other sensor? Just spitballing here, considered a radiator relocate kit or even trying the XMR to see if that helps?
This is xc racing no they wouldn’t try the xmr or relocate a rad
Seems every time he is racing someone close the radiator will clog quickly. I think most of the debris comes from underneath and the fans we run pull a lot of air so it acts like a vacuum for the fine mist coming off the tires from the quad in front of you. We are going to seal this up to see if this helps. Thanks Bryan🏁
@@randomlano1025 yes its cross country racing which many of them turn into mud races so it would be a bad idea to move the radiator up high? Or even run an xmr setup at the mud races? Yeah that would just be stupid! Smdh.
Did you see your banner the west Virginia fans made for u
I asked Brandon if he had seen the banner and he said he didn’t ☹️ . He was probably too busy trying to keep between the trees😎.
A big Thanks for your support 🏁