Did you replace and clone the CEM? If so what was the process and if not, then what exactly did you do? I have the same year s40 with the same problem and need to fix it. Thank you for your time and I hope to hear back from you soon :)
I had same problem. Just cleaned all corrosions by isopropyl alcohol and all my problem solved. But it’s not the case. The case is where this water comes from. Obviously water walks from wire harness of green socket, but from where this harness gets water drops. Did you find it? I suspect the washer pump of wipers. What do you think?
@@geesmooth7245 I will firstly check again washer pump which is mentioned by a guy on a Volvo forum. If this won't help, I'll burn bridges, will remove windshield and reseal again :)
Clean the cem and apply some Dielectric grease to the electrical connections. 90% of the time that solves all the problems
Hello . Could you fix that module or just bought a new one? Thanks
Did you replace and clone the CEM? If so what was the process and if not, then what exactly did you do? I have the same year s40 with the same problem and need to fix it. Thank you for your time and I hope to hear back from you soon :)
You have to transfers all data
@@sara78130 using what?
What did you do to fix it.? no sound, no explanation. What was it?
The CEM was the problem my guy. Some of its connector pins were corroded. The CEM is that fusebox found under the passenger glovebox. Cheers.
I had same problem. Just cleaned all corrosions by isopropyl alcohol and all my problem solved. But it’s not the case. The case is where this water comes from. Obviously water walks from wire harness of green socket, but from where this harness gets water drops.
Did you find it? I suspect the washer pump of wipers. What do you think?
sunroof drain in the pit and a-pillar area. do you have a sunroof?
@@geesmooth7245 No I don't have sunroof. I still couldn't find from where this water comes. :(
@@devrimarabalari I've also read about a leaking windshield seal, but that's harder to check
@@geesmooth7245 I will firstly check again washer pump which is mentioned by a guy on a Volvo forum. If this won't help, I'll burn bridges, will remove windshield and reseal again :)
Can failure of ABS pump also can lead to that
It’s gonna feel so good when my 1999 s80 I got for 600 starts up.
Did you get new cem from Volvo? How much did it cost
Hello. Yes new used 50eur
Hello all I cloning and change CEM module .
how much
¿Qué número de modelo es este Launch escáner?
What model number is this Launch scanner? ; )
Gracias !
Hello.
x431 pro
@@MadmanCar Interesting.
I have "123x" with x431 software update, but very different options. I will look for this model. Thank you !
интересно , как клонировать , если прошивка поехала , клонировать похеренную и проблема останется ...?
Sir pwede po sa akin gawin mo kc ganon nangyari volvo
how to bypass?
My CEM was also corroded.
Volvo and the talent of soldering haha
@@seesikopter There's a company in California who reprogrammed one I got from the junk yard for 200.00 dollars.
@@haroldbottom3474 im from Germany, paying delivery alone will be like 150€ or something
@@haroldbottom3474 what was the name of the company?
@@seesikopter Wow! Where in Germany? I used to live in Kaiserslautern.