Neglected Bmw E36 M3 Evo in for Restoration! - Part 4 - Finish line !
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- If you would like to be part of the channel permanently here's Patreon link
/ the777garage
Greatly appreciated for any kind of support!
Insta @the_777_garage
Tiktok @777garage
Email the777garage@gmail.com
Music by Epidemic Sound (www.epidemicsou...)
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
Great transformation! I have a real soft spot for E36's and I'm glad another one has been saved :)
Nice job Ed, but please flip the side indicators to the opposite side so they are installed correctly. 🙏
Yes yes…another mistake corrected
Thanks 🙏 😊
Look how filthy the engine bay is, and he works on it day and night. Good lord!
OMG! I have this same car but mine is the convertible (w some mods, I live in the mountains). Estoril blue with black interior. I love my blue beauty. You will smile every time u drive it!
My only complaint is the clutch spring has popped a few times & the steering pump has been an issue but other than that its been solid! A hobbyists (badass)dream!
10k all in, not a penny less..!
Incredible work.
Yeh me i like M539 Too but he just throws £5 grand here and £2 grand there. This is my way of doing things . I learn a lot from you .
He fixes what's broken...ass!
Labour would be way more than the prices of the parts... My guess is 7000 quid for the work alone. Some parts are really inexpensive, like the valve stem seals, which are only 100 quid or so from BMW. But doing the job at a BMW shop would be around 3-4K i reckon...
Very clean my friend 👌🏻
Would I be wrong to say the total labor came under 4.5k? Incredible work you did. I binged on ALL 4 episodes. I have an E36 2.8i that's in a worse state that this one. How does one reach out for further advice?
Hallo grüß Dich ich habe mich gerade etwas amüsiert aber ich freue mich dass du den Tipp von mir zu dir zu Herzen nimmst und die Bremsscheiben jetzt richtig eingebaut hast daumen hoch dafür schönes Video gut dass du dieses Fahrzeug wieder auf die Straße bringst ich hatte auch schon drei jetzt kannst du auch richtig bremsen und sie werden schön kühl bleiben bei Belastung good job
As for labour, I would say 35-40 hours at whatever your shop rate is...
I prefer this channel to M539 because you aren't just throwing money at cars. On the discs, the F01 7 Series is another car with handed discs - fit them the wrong way and 500 miles later they are warped and scrap. I also re-grease old belt rollers. The side repeaters are on the wrong way around though!
When you fit the eccentric wishbone bushes, fit them so that the hole is closer to the outside of the car. That moves the outer balljoint forwards, moves the wheel forwards and increases the castor angle.
M539 is a great channel but I just don't understand why is wasting money on fucking original radiotors hoses and shit which is nothing better then silicone aftermarket.. for example like with horns there M539 would wasted another few hundred for original m3 horns or whatever shit..
So yes I prefer this type of fixing with camon sense including wherever you can do it better and not waste money on original plastic shit and hoses..
Comes down to what is your goal for the car. If you are just looking to flip and make a profit then that is one thing then you have to go used OEM or aftermarket. If you are looking to the keep the car and run it for another 100k then you can do what M539 is doing which is go OEM and also do preventative.
Most ventilated rotors are directional.
@@justas6686 as he do restoration
@@gman19809 I admire what Sreten does with cars, lovely workmanship that puts most professional garages to shame. But lots of ££££ !
The bottom trim comes from BMW with the little piece on the end already attached I bought both I think it was about £150 for two
awesome job!!!
Salut, good job.👌👍🚗
From ttk ❤ , nice job sir 🎉
4.5k labour easy
Funny comment on the sideblinkers... 😁 not that a bmw driver will need it... 🤣
Didn't know Snapon was popular in the UK. How about Hazet or Stahlwille toolbox? must be cheaper
sick!
🔥
another 5k :)
Labs darbs draugs
You are missing 2 panels under the car
Veiksmi darbā! 😘😘😘
The indicators (side repeaters) are on the wrong way around!
Done
I use dental floss and a hot air gun to remove those glued on badges
How you managed to fail mot at this place 😂
🤷♂️😀
💪👍😎
Labour cost...about £2k...that's all I'm gonna pay.
🤣
Bro, please drop link for door handle rubbers on eBay
Item number 284437245442
Thousand
labour 1500 + VAT
2800 pund
2k labour
£3k without VAT for Labour
Labour 3k
£3500 labour
obviously you dont know how to install handle trims
parts=labour