Bit of a long video this time guys, heaps to fit in. This is part one of a three part build series focusing on the tray of the 79 series. Thanks for watching!
Hey bro, love the videos, wanting to build my own tray on my 75 Series, I based my head board mostly off your design, I hope you don’t mind, with the RHS what thickness is it 2, 2.5 or 3mm? TIA
squaring things with a level is a fine way to do it as long as you are making it level to the tray or cab for example if you sit the level on the back of the tray and the bubble is just touching the edge of the line as long as when you put the level on the headboard it is the same theres no harm in doing i that way
New follower sir, love the content! Just a thought about the rear window, gonna be a pain to give it a clean when it gets dirty with 20mm to fit a hand or a wiper.
Hey mate can you do me a favour? I’m making up a tray for mine and been looking for the angles for a head bourd the exact same as yours? What angles is it cut at?
Sure no stress mate. Its a bit hard to explain angles without a pic but the bottom angle is 14 degrees and the top two are 38 degs. Flick us a message on instsgram and I'll send you a photo of my plans if you like mate
Welcome to the party mate haha. I'm using a bossweld mst185 from bunnings, it wasn't much fun with gasless wire but now that I'm using gas and solid wire it goes alright
Love the tray looks really neat.
Thanks! Its turning out heaps better than I thought it would 👍👍
Love the built not bought sticker on the back
Love ya work bloke, so many ideas are coming from watching this build.
Thanks! Glad it was helpful!
It is looking good can not wait to see it finish and keep up the good work
Thanks mate, progress is going to speed up pretty rapidly because I need the ute for work haha
Very nice bro .. looking forward to more of this
Exceptional. Cheers
Thanks mate! Glad you enjoyed it!
Just found this channel. Love it mate
Glad you enjoy it!
Hey bro, love the videos, wanting to build my own tray on my 75 Series, I based my head board mostly off your design, I hope you don’t mind, with the RHS what thickness is it 2, 2.5 or 3mm?
TIA
love your vids mate
Keep them coming mate I love the vids
Cheers mate!
squaring things with a level is a fine way to do it as long as you are making it level to the tray or cab for example if you sit the level on the back of the tray and the bubble is just touching the edge of the line as long as when you put the level on the headboard it is the same theres no harm in doing i that way
Mate a level works in a pinch but it’s more difficult and not as accurate as a square
New follower sir, love the content! Just a thought about the rear window, gonna be a pain to give it a clean when it gets dirty with 20mm to fit a hand or a wiper.
Thanks mate! Yeah its going to be a bit of a pain I hadn't thought about that haha, who needs clean windows though hey
lookin' good bro
Thanks mate!
nice mate!
Thanks!
Whens the the next vid coming? Im about to start my tray build and keen to see how you go
Hopefully next week mate 👍
Hey mate, really enjoying the build. I'm doing a tray myself at the moment and am wondering what design software you're using?
Thanks mate! I use a free 2d program called solid edge. It's pretty easy to use and does the trick, hit me up on insta if you need any help
Good job Roy,did you weigh all the steel you used to make the tray ?
No mate I’ll find out what it weighs after it’s all built haha
Hey mate just wandering you probably already said it but what sized rhs are you using for the actual headboard
Hey mate, it's 75x50 around the outside, 40x40 uprights and 32nb tube across
dead right about squaring and levelling. 2 different cans of worms there
Hey mate can you do me a favour? I’m making up a tray for mine and been looking for the angles for a head bourd the exact same as yours? What angles is it cut at?
Sure no stress mate. Its a bit hard to explain angles without a pic but the bottom angle is 14 degrees and the top two are 38 degs. Flick us a message on instsgram and I'll send you a photo of my plans if you like mate
RQ Projects righto what’s your Instagram?
@@maxjennings3493 rqprojects mate
Whens the next vid mate? keen as for an update
Haha working on it right now mate, didn't think it would take this long
Hey mate, I’m new to your channel 🙌. What model welder are you using?
Welcome to the party mate haha. I'm using a bossweld mst185 from bunnings, it wasn't much fun with gasless wire but now that I'm using gas and solid wire it goes alright
What size did you make your mounts mate?
Front mounts are 75x75 with 4mm wall, rear mounts are 75x40 5mm C channel upright with 50x5 flatbar welded across the bottom
@@RQProjects cheers mate wicked job btw👍
@@subivapor9696 thanks mate appreciate it
What are your pro tips 1-6? 😂
Hey mate
Are you ever going to smoke the wheels for not ?
Your at 400 sub now
Yeah it'll definitely happen mate I just gotta get it drivable first 😁
Why is it blue? I'm from the us!
Is it a weld through primer?
Gday from down under! Yep thats the weld through primer from the steel shop