Folding motorbike trailer - how does an MT-1 trailer from LORRIES do it?

This video shows how to assemble the MT-1 motorcycle trailer in a simple and quick way. If you are passionate about motorcycles and traveling, you will certainly appreciate the innovation and practicality of this device. The MT-1 is a trailer that can be easily folded, making it ideal for storage in limited spaces. In this video we will show you step by step how to fold the MT-1 trailer to the vertical and horizontal position.
This process applies to both the MT-1 model, designed to transport one motorcycle, and the larger MT-2 - dedicated to two-wheelers.
Folding the MT-1 motorcycle trailer to the vertical position:
1. Move the gear to position 3.
2. Remove the safety pin that holds the trailer in the transport position.
3. Remove the safety knobs.
4. Move the lever and hold it in position 2, then by turning the crank, lower the trailer until the rear of the frame rests on the ground.
NOTE: Keep a safe distance from the mechanism crank when lowering the motorbike trailer. It is important to avoid hand contact with the crank in case it starts to rotate on its own. This is particularly important when lowering a motorbike trailer, as this can create a hazard.
If the crank slips out of your hand, let go of the mechanism lever immediately.
5. Place a safety wedge under the wheels to prevent it from moving accidentally.
6. Lift the front of the trailer until it is in an vertical position.
7. Unlock the leg and lean the trailer against it, ensuring stable support.
8. Lift the rear part of the trailer upwards.
9. Screw in the locking knobs to hold the rear of the trailer in an vertical position.
10. Slide the support wheel in and back as close to the drawbar as possible to ensure the weight of the trailer is evenly distributed.
Folding the MT-1 motorbike trailer into a horizontal position:
1. Place the safety chocks under the wheels of the trailer to prevent accidental movement.
2. Remove the locking knobs.
3. Lift the rear section of the trailer and place it on the front section so that the rear of the platform is in a horizontal position.
4. Screw in the locking knobs to keep the trailer horizontal.