Hey, nice build build just a word of advice, it's recommended to plug in two different pci-e cables plugged into the 12VHPWR cable splitter because the gpu can draw a lot of power momentarily and could melt the cables. Anyways good work on your first PC.
Nice build! It could have been much nicer if you chose the white thermalright CPU cooler but it's your choice! Came across this case and have been thinking about it but might add one or two intake fans at the bottom
W build i just built my first pc last week and its super similar i got the 4070 super too but went for the i5 13600k bc i got a great deal on it only 200 bucks!
love oyu said pc master race you build your pc . unlike others who by a prebuild i build 3 pcs so i might go back too a single pc setup though it too much for me i am getting older i am 33 now i can feel my back hurrting i be upgrading my gaming mahcine . streaming pc i might give it too my nephew oh yea i owned my build since 2017 i build from scratch .
cool build! you have to be carefull though, about air intake, as i can see you have 3 fans on pc and propably they are all exhausting fans? am i wrong? if you had 3 fans exhausting you should have another 3 intake, but i believe you have 0 fans for intake so your pc doesnt get air from outside, this can be really dangerous
thanks, yea I flipped one of the fans. so far my cpu and gpu are staying cool even during gaming, but I am thinking of buying a couple more fans for intake
Nice build for the first time. You should enable xmp profile in bios. You are losing 1200mhz at your ram. And two fans in the bottom would be awesome. Have fun.
Never seen a computer with no intake fans , I’d love to see your temps while gaming , the gpu is gonna feed hot air to your cpu cooler which will cause your cpu to run hotter than normal, that being said very nice looking computer
thanks for the warning. I tried playing warzone. 1440p at 150-200fps. gpu is averaging at about 50C and cpu at about 65C. I also flipped one of the top fans to push air in, hopefully that helps
Yea I noticed there’s screw holes to add one so ima try to fit one in
2 หลายเดือนก่อน +1
@@jareddot that would be vital since with your current fan setup you wont be getting much cool air for your components, great build otherwise but I would have probably picked an amd gpu since you can basically get like 20% more performance for the same price
the case hes using is the okinos aqua 3 which is specifically designed to be a negative pressure case so isn't intended/doesnt need to have intake fans and its also part of the aesthetic
bad case, overrated expensive ssd and I would personally go amd for the gpu for value reasons but other than that great build. 3:17 not a radiator that my dear friend is called a tower 6:30 I'd recommend two pcie 8 pin cables to go to 12vhpwr connector instead of just one I'd change the bad case for something better for a couple reasons, no real intake causing a negative pressure pc and it looks to be a poorly made case. My recommendations would be the Cooler Master MasterBox MB311L, MSI MAG FORGE M100R, Asus A21 and the Deepcool CH360. overall a decent first build a few mistakes and welcome to pc master race I guess and unlike what someone said in the comments you did install the ram in to the correct slots
watching a simple pc being born is very refreshing to watch
no expensive fans or case, just a simple clean build
very nice 👍👍👍
Great build, I built my first pc this year, too, back in February, and it has been glorious ever since
Hey, nice build build just a word of advice, it's recommended to plug in two different pci-e cables plugged into the 12VHPWR cable splitter because the gpu can draw a lot of power momentarily and could melt the cables. Anyways good work on your first PC.
Thanks for the advice, gotta get that done
Nice build! It could have been much nicer if you chose the white thermalright CPU cooler but it's your choice! Came across this case and have been thinking about it but might add one or two intake fans at the bottom
thats what some people have been recommending
love the setup, looks super clean!!
Nice..good job man..let's go
Great build
Congrats on the build!
W build i just built my first pc last week and its super similar i got the 4070 super too but went for the i5 13600k bc i got a great deal on it only 200 bucks!
twin! yea I was very close to going with intel also
love oyu said pc master race you build your pc . unlike others who by a prebuild i build 3 pcs so i might go back too a single pc setup though it too much for me i am getting older i am 33 now i can feel my back hurrting i be upgrading my gaming mahcine . streaming pc i might give it too my nephew oh yea i owned my build since 2017 i build from scratch .
Clean as a whistle mate good job!
Welcome brother 🤝
good jobs
Great build! Welcome to pc master race
build was cool
cool build!
you have to be carefull though, about air intake, as i can see you have 3 fans on pc and propably they are all exhausting fans? am i wrong?
if you had 3 fans exhausting you should have another 3 intake, but i believe you have 0 fans for intake so your pc doesnt get air from outside, this can be really dangerous
thanks, yea I flipped one of the fans. so far my cpu and gpu are staying cool even during gaming, but I am thinking of buying a couple more fans for intake
Awesome, I also recently joined the pc master race
Nice build for the first time. You should enable xmp profile in bios. You are losing 1200mhz at your ram. And two fans in the bottom would be awesome. Have fun.
Thanks, will do!
cool, have a nice experience bud
Never seen a computer with no intake fans , I’d love to see your temps while gaming , the gpu is gonna feed hot air to your cpu cooler which will cause your cpu to run hotter than normal, that being said very nice looking computer
thanks for the warning. I tried playing warzone. 1440p at 150-200fps. gpu is averaging at about 50C and cpu at about 65C. I also flipped one of the top fans to push air in, hopefully that helps
2:37 "this little tiny thing"??? looks average size to me, maybe even a little big if u ask me
haha oh you right
I advice you to add 1 extra fan as intake to the bottom since you seem to not have front intakes fans at all
Yea I noticed there’s screw holes to add one so ima try to fit one in
@@jareddot that would be vital since with your current fan setup you wont be getting much cool air for your components, great build otherwise but I would have probably picked an amd gpu since you can basically get like 20% more performance for the same price
the case hes using is the okinos aqua 3 which is specifically designed to be a negative pressure case so isn't intended/doesnt need to have intake fans and its also part of the aesthetic
Welcome my friend to your new obsession and life long hobby! gtw, Great build! Happy for you j dot
amazing video, keep it up!
pretty clean build for a first one too
love the parts man hope u enjoy!!!
W BUILDDDD
Lol, NOW you've done it! Nice build j dot
Wristband static thing is a myth. I've built a few PC's and I've never "grounded" myself. Don't worry about it.
Welcome.
bro you should always install the A2 ram first and then the B2 ram.
sheesh, didnt realize, I noticed ppl doing it that way but thought it didnt matter
@@jareddot for a first time pc builder, u did really good tho. It's a very clean build
ssd size proves size dont matter fr
Welcome to uinlimited fps platform.
I miss the simplicity of console though. I've enjoyed my pc though
100% agree
welcome bro, be prepared for years of blue screens, boot loops, ram misshaps and trauma 👍
also im supprised your pc booted first time up 😂😂
I was so excited haha
I have seen blue screens, but never boot loops. You must do something stupid to get boot loops.
bad case, overrated expensive ssd and I would personally go amd for the gpu for value reasons but other than that great build.
3:17 not a radiator that my dear friend is called a tower
6:30 I'd recommend two pcie 8 pin cables to go to 12vhpwr connector instead of just one
I'd change the bad case for something better for a couple reasons, no real intake causing a negative pressure pc and it looks to be a poorly made case.
My recommendations would be the Cooler Master MasterBox MB311L, MSI MAG FORGE M100R, Asus A21 and the Deepcool CH360.
overall a decent first build a few mistakes and welcome to pc master race I guess and unlike what someone said in the comments you did install the ram in to the correct slots
where were you before I built the pc haha, thanks!
Welcome to the master race **opens arms in 1440p 250fps**
W build personally wouldnt choose this case thought because its known to have bad air flow