*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*
Отличное решение, как для хоббийной мастерской в таком помещении. Понравилось очень. Как схему, держу уже в уме, как сделать себе. Осталось продумать решение тех особенности пилы своей (макita 2704) при расширении направляющих для упора не позволит упор ставить близко к пильному диску. Вот это пока и останавливает. Ну а за коробку для сбора опилок-респектище 👍, гофру (только если нужно менять угол реза, вместо того переходника что у Вас) А в вобщем, приятно смотреть было, впрочем как всегда! Интересных проектов в дальнейшем!!!
Отличный стол!!! Одназначно лайк. Не хватает отверстий на рабочей поверхности и верхней обвязке для установки струбцин. Правда и толщину рабочей поверхности придется увеличить.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Thats what exactly I need in my little workshop. Thanks for the ideal video :) and yes Who needs a Workshop Dust Collector when you can just use a box :D great idea bud Thanks
Questo te lo copio. 😉 Molto comodo e utile, in più funge da secondo bancone. Sotto la base dove appoggia la sega ci stanno due cassetti. Complimenti per la cura che dedichi ai tuoi lavori. 👍
Excellent workbench and table saw bench combination, I think i am going to build one like you have done. Everything looks just what i need for my Dewalt Dw 745 and work area. Thank you for sharing ( Stay Safe you & your family ) .
Great video! I have been looking for a starting point project to began making my garage into a workspace and I think your video has finally given me that. Thanks for posting.
Great job. Exactly the same as mine, but with router set in the outfeed table section. I've had mine for 6 years in a shop slightly bigger than yours and I'm now fed up of it being in the way and having to roll it round to do anything. I'm going to split it into two smaller units that can be joined if needed and stored against a wall. Also you may find you need to remove the pipe from the saw outlet as they block now and again even with extraction and especially if you forget to switch extraction on.
This makes me want to start my table saw table but I’ve been procrastinating because I’m a carpenter all day at work and hate to do carpentry at home 🤦🏽♂️ but awesome video brother. ✌🏾
Great job man. I like the dust collector idea too. How about lining that dust box with a clear plastic back so when it is full, you only pickup the bag and not have to worry about cleaning it.
Hi Jesus I´ve made my workbench/out feed table similar to this one, but with a DeWalt 745 table saw. I have link to free SketchUp plans. You can see it here: th-cam.com/video/buZD18Yqp28/w-d-xo.html
Great project. I've replicated it this weekend. The only thing I can't figure out is how you add that small piece of plywood between the table saw body and the table saw wing. You actually screw into something but can't figure out what you're doing. Good job!
wonderful job. I just got my first table saw. An m18 and I thought that the table was too small. You and my wife pointed out that the table is extendable to ones liking. I would've taken the credit for your great idea and skills, but she walked in while I was rewatching your video and said " see he understands what I've been trying to tell ya @$$hole.😆🤣😂 GREAT JOB BUDDY👍🏾 Keep 'em coming
Без всяких там излишеств, но главное рабочий стол, я когда то делал стол на коленке, что то даже уже подумываю переделать его . Хочу сделать что то более крутое. Ну а так то , лайк. Всё просто и удобно. =)))
This is a well-thought-out, practical, yet simple workbench design. It provides a logical starting point for any small woodworking shop. For me, it's a timely and appropriately-sized starting point for building my own workbench with a built-in tablesaw. Even the Vereshchak construction sequence is well planned. Well done, Mr Vereshchak. And thanks!
Should consider extending those grooves for longer crosscuts. A bit too low for me but great build. Adding up all these ideas into my ultimate mobile table saw workbench.
I love that you literally didn't have a place to put your table saw. You were actually building it for yourself. I currently have my DeWalt table saw on the floor 😂. I'll be building one of similar size. Nice one!
Замечательный стол получился! Очень хочется повторить себе такой, как раз начинаю свою мастерскую обустраивать. Подскажите, пожалуйста, за почти 1,5 года эксплуатации не выявилось никаких недостатков в конструкции, может хотели бы что-то изменить?
I’m actually in need of building an outfeed table. Do you have plans on this design? I really like the simplicity of it and will fit perfectly in my shop
Honestly, out of all of the videos I've watched the past couple of days, this is by far my favorite. I just wish there was a little bit more step-by-step detail but beggars can't be choosers. Thanks for the video 👍
I really loved your work bench. Great job. My only concern is the glued top. When you need to change. Tops always get beat up. But it's a great work bench. Congratulations.
Всё красиво, но прискорбно одно- всё же это дерево и со временем всю конструкцию поведет винтом. Единственный инструмент для которого подходит дерево- это киянка)
Very nice design. I have been wanted to build a workbench and integrate my table saw in it. I’ll probably make it a bit higher and where you have the open area below, build a shelf and add pull out drawers which I have now on my present workbench. Thanks for sharing!
Круто! Лайк однозначно 👍я бы ещё добавил розетку(можно две), чтобы, в случае необходимости, можно было подключить нужный инструмент и при этом не тянуться к стенке. По принципу гладильных досок
*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*
Not hard to build simple layout no annoying talking throughout the video an at the end he gave out the measurements to his build... genius 👍👏👏👏
Отличное решение, как для хоббийной мастерской в таком помещении. Понравилось очень. Как схему, держу уже в уме, как сделать себе. Осталось продумать решение тех особенности пилы своей (макita 2704) при расширении направляющих для упора не позволит упор ставить близко к пильному диску. Вот это пока и останавливает. Ну а за коробку для сбора опилок-респектище 👍, гофру (только если нужно менять угол реза, вместо того переходника что у Вас) А в вобщем, приятно смотреть было, впрочем как всегда! Интересных проектов в дальнейшем!!!
Another cool video that excludes the purchase list. That would go a very long way in helping others build a table like this.
Очень грамотный и функциональный стол под циркулярку. Спасибо за видео!
Отличный стол!!! Одназначно лайк.
Не хватает отверстий на рабочей поверхности и верхней обвязке для установки струбцин. Правда и толщину рабочей поверхности придется увеличить.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Мастеру однозначно Лайк . Очень аккуратная сборка ,это сильно подкупает и это того стоит ! Респект !
Спасибо большое!)
Thats what exactly I need in my little workshop. Thanks for the ideal video :) and yes Who needs a Workshop Dust Collector when you can just use a box :D great idea bud Thanks
Questo te lo copio. 😉 Molto comodo e utile, in più funge da secondo bancone. Sotto la base dove appoggia la sega ci stanno due cassetti. Complimenti per la cura che dedichi ai tuoi lavori. 👍
Good work. I built my saw into the table in the same way but I didnt glue in the table top so I could replace it if need be.
Look my invention "Parallel Guided Power Saw" on you tube.
This is great, and it's the FIRST video of many I've watched to orient the saw to use most of the table for output.
Thanks 😊
Great build! And learned a new trick with the level at 3:00!
Спасибо за видео.Приятно смотреть на Вашу работу.Правильный подход к делу, аккуратно и красиво.Успехов и всего наилучшего в Вашем деле.
Алексей Большое спасибо)))
The best part was converting that box as a dust collector :)
Liking the dust collection...it actually collects!
Could you make a cutlist or shopping guide for this bench? 😊
Excellent workbench and table saw bench combination, I think i am going to build one like you have done. Everything looks just what i need for my Dewalt Dw 745 and work area. Thank you for sharing ( Stay Safe you & your family ) .
Thanks a lot 🙏🏻
Really glad I saw this. I’ve been looking for this for a long while! I’ll be making mine soon. Great job!!
Thanks)))
Good luck)
Of the many videos I've watched, this is the best table saw work bench I have seen.
Thanks)
Do you have plans for this build? It is awesome.
WTG Nice to have a portable saw to move around I put casters on mine as well on my saw cart Should get many years out of that one
Just built this. It's perfect. thank you for the video.
You just built this, did you stick to the 180 x 100 dimension?
What did it cost you for material?
nice design, I like the box for the saw dust.... easy, simple and works great...!
😊😊😊
Great video! I have been looking for a starting point project to began making my garage into a workspace and I think your video has finally given me that. Thanks for posting.
I like very much how you presented your entire table saw making. As a beginner, I am making same one like yours. Thank you for your inspiration.
Thank you! Good luck)
Really nice build - simple but very functional
De lujo tu proyecto.. intentare copiarlo , 🙂
Great job. Exactly the same as mine, but with router set in the outfeed table section. I've had mine for 6 years in a shop slightly bigger than yours and I'm now fed up of it being in the way and having to roll it round to do anything. I'm going to split it into two smaller units that can be joined if needed and stored against a wall.
Also you may find you need to remove the pipe from the saw outlet as they block now and again even with extraction and especially if you forget to switch extraction on.
I don’t even own that table saw. But if I did, I’d definitely copy this design!
Would u have the plans to this design?
Very nice build with some really good ideas. I will use your methods for a new table with my worm drive Skill saw. Thanks.
This is the best video I seen so far, well done will like to know step by step so I can make one for my self
Thanks for sharing
Thanks)
@@mr.vereshchak Looks like you never got around to making a cut list, would love to see one. How do you like the table 1 year later?
Beautifully done, the use of the cardboard box is very resourceful of you
Thanks)))
Отличный стол! Лукаса поставил!
This makes me want to start my table saw table but I’ve been procrastinating because I’m a carpenter all day at work and hate to do carpentry at home 🤦🏽♂️ but awesome video brother. ✌🏾
The Table is very nicel and and useful!
Źfq
Аккуратно, красиво, функционально. Однозначно лайк и подписка.
Cпасибо)))
@@mr.vereshchak хочу себе такой же сделать. Из всего просмотренного мною, ваш стол мне показался самым надёжным. Всё гениальное - просто ))
Superb....fantastic !!! I have the same table saw 👍 and has given me an idea too
Cheers
Красота, браво мастеру
Great table. You gave me good ideas for my table . Thank you 👍
Thanks)))
Весной тоже начинаю, оборудовать гараж под мастерскую. Подписался, много полезного для себя уже увидел. Лайк!!!
Успехов)))
Great job man. I like the dust collector idea too. How about lining that dust box with a clear plastic back so when it is full, you only pickup the bag and not have to worry about cleaning it.
Come on, no more unnecessary plastic please!!
Thanks for the share, I going to do something similar for DW745. Great idea!
Thanks)
Hi Jesus I´ve made my workbench/out feed table similar to this one, but with a DeWalt 745 table saw. I have link to free SketchUp plans.
You can see it here: th-cam.com/video/buZD18Yqp28/w-d-xo.html
Рабочую поверхность надо повыше сделать, иначе спина болеть будет
Какая высота удобнее?
Грамотная задумка. Спасибо за видео. Буду делать схожее, но с ящиками. Молодец. Жирный лайк. Удачи.
Спасибо и тебе удачи)
Под рейсмус надо выдвигающуюся полку сделать. Так запихивать его вниз быстро надоест уставать.
В целом очень даже не плохо получилось!
Respekt, sehr gut. Das beste was ich bis jetzt gesehen habe.
Danke)
Great project. I've replicated it this weekend. The only thing I can't figure out is how you add that small piece of plywood between the table saw body and the table saw wing. You actually screw into something but can't figure out what you're doing. Good job!
Im wondering the same thing, anyone have an answer on this??
Looks like that is resting slightly on the edge of the two rails that extend the wing.
@@tomashausner7097 He screws in a strip of wood that is mounted on the saw. Probably the same strip that was on it in the first place.
I like how you drilled pilot holes. Good job
Nice job, thanks for sharing your ideas.
pretty cool...well done, specially the dust collector!!
WOW!AMAZING!!
HAPPY NEW YEAR IN 2019!!
Thanks))
HAPPY NEW YEAR TOO
this is what i needed!! 🤘🤘
This is great 👍, l’ll be making one. Really glad to see it..
Thanks)))
Good luck 😊😉🙃😊
МОЩНО!!Супер!! Красавчик!👍👌✌😉
wonderful job. I just got my first table saw. An m18 and I thought that the table was too small. You and my wife pointed out that the table is extendable to ones liking. I would've taken the credit for your great idea and skills, but she walked in while I was rewatching your video and said " see he understands what I've been trying to tell ya @$$hole.😆🤣😂
GREAT JOB BUDDY👍🏾
Keep 'em coming
Great video...Just got a saw and need exactly this to make things easier....keep em coming and we will be watching...Many Thanks to you.
Thank you 😊
The video is great, I like your design and work... but the number of advertisements in the video is painful
Без всяких там излишеств, но главное рабочий стол, я когда то делал стол на коленке, что то даже уже подумываю переделать его . Хочу сделать что то более крутое. Ну а так то , лайк. Всё просто и удобно. =)))
Can you please send me the plans for this mobile table. I would be happy to pay for it. Very nice design.
Regards,
me too
Me too
And me
me too
Probably everyone should make a table for their tasks or problems?
This is a well-thought-out, practical, yet simple workbench design. It provides a logical starting point for any small woodworking shop. For me, it's a timely and appropriately-sized starting point for building my own workbench with a built-in tablesaw. Even the Vereshchak construction sequence is well planned.
Well done, Mr Vereshchak. And thanks!
Thanks a lot ☺️
Love it! Been looking for a table saw bench like this. Really well done!
Thanks 🙏
Should consider extending those grooves for longer crosscuts. A bit too low for me but great build. Adding up all these ideas into my ultimate mobile table saw workbench.
Great work man!!!! From Italy
Look my invention "Parallel Guided Power Saw" on you tube.
@@davidmuresan628 ok,tanks
Beautiful, many people do not have such beautiful furniture.
Why spend the money on a big table saw? This is brilliant.
Вот это я пониманию!!!! Своими руками👍👍👍👍👍Отличная работа. Все доступно и понятно.
Good video but I have to take my epilepsy medication after that music!
same thing for me, and that make me barf
I love that you literally didn't have a place to put your table saw. You were actually building it for yourself. I currently have my DeWalt table saw on the floor 😂. I'll be building one of similar size. Nice one!
Thanks 😊
Good video!
Thanks 🙏
Excellent craftsman. You dun good Mr. Vereshchak!
You are amazing, ;)
Thanks 😊😃🙂)
@@mr.vereshchak 😎👌😍👍🎉
Замечательный стол получился! Очень хочется повторить себе такой, как раз начинаю свою мастерскую обустраивать. Подскажите, пожалуйста, за почти 1,5 года эксплуатации не выявилось никаких недостатков в конструкции, может хотели бы что-то изменить?
I’m actually in need of building an outfeed table. Do you have plans on this design? I really like the simplicity of it and will fit perfectly in my shop
Great job, the simple the better, nothing fancy but effective. 👌👍
Good
Thank you)
Tolle Werkbank. Einfach und gut. Tolles Projekt. 👍👍👍👍👍. Grüße aus Germany von Hardy.
Danke😊
Congratulations! Awesome!
Thanks)
Honestly, out of all of the videos I've watched the past couple of days, this is by far my favorite. I just wish there was a little bit more step-by-step detail but beggars can't be choosers. Thanks for the video 👍
Great table. But holy shit, it's 2019 use some other music.
place your hand in there then you will hear your own music.
Music is fkn stupid. I stopped watching
I really loved your work bench. Great job. My only concern is the glued top. When you need to change. Tops always get beat up. But it's a great work bench. Congratulations.
Thanks)
Nice job but for me it would have to be taller due to my bad back.
krelyea For me the proper height would be between 36 - 42 inches.
Love this. Say im new to woodwork and not skilled enough to follow the steps
Хорошая работа, приятно смотреть... А слушать - нет. Придумай чего-нибудь приятное для всех. Пожалуйста!
Looks like a small shop. Excellent job.
Thanks)
Круто
Спасибо)
@@mr.vereshchak вообще мастер на все руки:)
Всё красиво, но прискорбно одно- всё же это дерево и со временем всю конструкцию поведет винтом. Единственный инструмент для которого подходит дерево- это киянка)
Cool hello
Hello
Thanks)
I have the same Bosch saw. It's too loud but works great. Nice table!
Мой перфекционизм удовлетворен... 😂
Very nice design. I have been wanted to build a workbench and integrate my table saw in it. I’ll probably make it a bit higher and where you have the open area below, build a shelf and add pull out drawers which I have now on my present workbench. Thanks for sharing!
Maybe, some magnets on the sides for spare blades and tools ? .... fab video 👍
Thanks! Good idea 👍
Fantástico amigo. Tenho uma DeWALT 745, acho que esse projeto ficará perfeito para minha serra também. obrigado.
굿
베리굿
좋아요
아주 좋아요.
멋진 작품 탄생.
Круто! Лайк однозначно 👍я бы ещё добавил розетку(можно две), чтобы, в случае необходимости, можно было подключить нужный инструмент и при этом не тянуться к стенке. По принципу гладильных досок
So simple and yet so beautiful. I must build this.
Thats what I was thinking
Bel lavoro complimenti👍
Grazie)))
Big thumbs up on the dust collection!!
i liked that too
Like the way the outfeed table is built , got that torsion box look to it
Great job. Really like the dust collector.
Круто! А размеры подскажите?