Fast only counts when you hit what you’re aiming at. You can’t miss fast enough to win. The muzzle was all over the place in the intro. Definitely not threatening Jerry.
I have the FM9 with a 10.5" barrel and rear charging. I've got over 1000rds in it. Mine dumps mags naturally. I have the Franklin Arms Gen 3 binary titanium nitride coated and it's shoots completely opposite how yours shoots. I'm not downing.your gun. It looks very cool. I guess I have mine tuned better than what set up you have. I'm using a Odin Works 7.5 lbs buffer and a Tubbs precision 308 flat wound coil spring. My gun absolutely rips. Yes the LPS happens now and then, only have steel with hard primers. Mine shoots like a dream. Zero issues. The customer support treatment too me was excellent. I broke the bolt catch and they sent me out 100% free 2 bolt catches, 2 rods, 2 springs, and 2 mag release springs and several stickers. It got too me 2 days after I called. I have a small you tube channel. 62 subs but over 30 videos. Raw videos but straight to the point. Drop a sub on mine " TANGO MAN TATICAL ". And I will sub yours. Take care God bless
My FM9 came with a polymer trigger assembly too. I've ordered a CMC drop in single stage trigger, no polymer triggers!!! I also put a SBA4 brace on it. The blade wasn't comfortable for me.
Was able to trigger bump on 1st couple of clips. This gun like shooting fast. Had hang ups with failure to shoot, had primer hit indentation but no ignition. Pulled it apart and found the the striker doesn’t fully extend when pushed in. Pushing bolts and extractor assembly you can see it doesn’t fully extend. Weird but it works some how.
I think everyone that watched this just went full dad mode watching this , I was about to say watch that index and pinky, I built pretty much the same gun and got bit, chunk of my pinky went missing... but I found it... smashed between the bolt and the upper
Got this gun in 5” with the tri lug. Love it. I accidentally put (and left) a stock and vertical grip. Oops!! I’ll SBR it when I send off for a CAN for it. Going with the Wolf
Yeah bro, might wanna take those other accessories off until you get a stamp and delete comment. I might report you just to save you from the evil overseers.
@@illmatic826 I have holosun on some of my pistols. They're reliable even Regular Guy Training has used them tens of thousands of rounds. Some people don't like them though because they're a Chinese company. I have the HE510C on an AR, 507C (1 green 1 red) on a couple pistols, and recently got a 407K on my P365. They're all good. Some friends have the Vortex viper red dot. Bushnell is another brand they use too. As for 1-6 scopes if I had the money I'd go with the Viper or even better the Razor HD from Vortex. I have a strike eagle but rather have the others. Sorry I don't have 1 specific recommendation. There's so much good stuff out there.
I only added a heavier buffer I think an H3 and leveled the hammer on the trigger. Nothing done to the bcg. I know the lighter weight of a bcg is not bad depending what you're trying to achieve, but the modification of it can disturb the integrity of it. I know people have done it, but I've never done it myself.
@@WoodsDog thanks for the reply buddy. I have a FM and my bolt extension for my Sylvan won’t stay in with it folded because the weight is in the way. Did yours not come with a weight?
@@CosmolineDaydream oh! The sylvan weight. Sorry dude I thought you meant the bolt itself. Yeah the weight for the Sylvan doesn't stay in when folded. The Law one does have a safety feature that holds it in but not the Sylvan. It might be do to patent infringement but not sure. And if you remove the plug, the gun won't cycle.
@@WoodsDog nope. Ha. I meant the weight in the BCG that’s held in place with a roll pin. Did you leave that in? If so, how do you keep the Sylvan plug from just wobbling out when it’s folded?
Picked up fm9 5 inch upper from glockstore....will pair with dirty bird lower from ar15 discounts......will get sbpdw brace at the end of the month.....will start off with mil spec trigger and go from there
I have the FMP-9 and the stock trigger isn't bad! I can mag dump a 34 in around 6 seconds with accuracy! I like the binary but it doesn't seem practical just fun!
Thanks for making this video. I have an FMP-9 and an Echo ARII trigger I was thinking about installing in it. Watching your experience with the jams I'm not so enthusiastic about it. What brand magazines are you using? P.S. Mine came with a metal hammer and trigger.
Thx. The mags I used were Glock and a korean brand that I can't remember the name of. The Korean mags were really hard to load after 20 rounds unless you hit them on the mag floor plate.
Can those 2 screws that hold the buttstock tight be loosened & the buttstock be pulled out to make it longer or does it have to stay pushed up all the way,in other words,can the buttstock screws be loosened to make the buttstock longer for a better fit.
The hammer was plastic?? Did you physically see this hammer? There's no way there was a plastic hammer on your friend's gun, no way! By the way I have an FM 9 and I love it!
Squirrels are eating my garage from the outside in. Chewed the power for my overhead door just this week. Gonna be a rodent genocide over at my house this weekend
Fast only counts when you hit what you’re aiming at. You can’t miss fast enough to win. The muzzle was all over the place in the intro. Definitely not threatening Jerry.
Good review dude straight and to the point
I have the FM9 with a 10.5" barrel and rear charging. I've got over 1000rds in it. Mine dumps mags naturally. I have the Franklin Arms Gen 3 binary titanium nitride coated and it's shoots completely opposite how yours shoots. I'm not downing.your gun. It looks very cool. I guess I have mine tuned better than what set up you have. I'm using a Odin Works 7.5 lbs buffer and a Tubbs precision 308 flat wound coil spring. My gun absolutely rips. Yes the LPS happens now and then, only have steel with hard primers. Mine shoots like a dream. Zero issues. The customer support treatment too me was excellent. I broke the bolt catch and they sent me out 100% free 2 bolt catches, 2 rods, 2 springs, and 2 mag release springs and several stickers. It got too me 2 days after I called.
I have a small you tube channel. 62 subs but over 30 videos. Raw videos but straight to the point. Drop a sub on mine " TANGO MAN TATICAL ". And I will sub yours.
Take care God bless
My FM9 came with a polymer trigger assembly too. I've ordered a CMC drop in single stage trigger, no polymer triggers!!! I also put a SBA4 brace on it. The blade wasn't comfortable for me.
Was able to trigger bump on 1st couple of clips. This gun like shooting fast. Had hang ups with failure to shoot, had primer hit indentation but no ignition. Pulled it apart and found the the striker doesn’t fully extend when pushed in. Pushing bolts and extractor assembly you can see it doesn’t fully extend. Weird but it works some how.
I think everyone that watched this just went full dad mode watching this , I was about to say watch that index and pinky, I built pretty much the same gun and got bit, chunk of my pinky went missing... but I found it... smashed between the bolt and the upper
Got this gun in 5” with the tri lug. Love it. I accidentally put (and left) a stock and vertical grip. Oops!! I’ll SBR it when I send off for a CAN for it. Going with the Wolf
Might wanna take that off until you get your tax stamp, just one gun owners to another.
Yeah bro, might wanna take those other accessories off until you get a stamp and delete comment. I might report you just to save you from the evil overseers.
@@imagohouse7412 already SBR’d!!! Stamp collecting is addictive!! Currently working on converting a Mossberg shockwave to a SBS.
@@scott2228 Good deal brother! Didn't want you in the clink!
Great video man loved the review
Thanks
it's made to be 25yrds, 9mm will drop 1.8" at 50, so the drop and rise is very predictable setting it at 25
left index finger is getting to close to the end of barrel . thank you for the info .
I just got one of these, they are dope!!
Have fun!
@@WoodsDog Any idea for a good red dot??
@@illmatic826 I have holosun on some of my pistols. They're reliable even Regular Guy Training has used them tens of thousands of rounds. Some people don't like them though because they're a Chinese company. I have the HE510C on an AR, 507C (1 green 1 red) on a couple pistols, and recently got a 407K on my P365. They're all good.
Some friends have the Vortex viper red dot. Bushnell is another brand they use too.
As for 1-6 scopes if I had the money I'd go with the Viper or even better the Razor HD from Vortex. I have a strike eagle but rather have the others.
Sorry I don't have 1 specific recommendation. There's so much good stuff out there.
@@WoodsDog I'm doing my research lol thanks bro
@@illmatic826 holosun bro
Thank you for the video 👍
I was waiting for his index finger to disappear
Did you take the weight out of the BCG? Is there any safety issue associated with doing do?
I only added a heavier buffer I think an H3 and leveled the hammer on the trigger. Nothing done to the bcg.
I know the lighter weight of a bcg is not bad depending what you're trying to achieve, but the modification of it can disturb the integrity of it. I know people have done it, but I've never done it myself.
@@WoodsDog thanks for the reply buddy. I have a FM and my bolt extension for my Sylvan won’t stay in with it folded because the weight is in the way. Did yours not come with a weight?
@@CosmolineDaydream oh! The sylvan weight. Sorry dude I thought you meant the bolt itself. Yeah the weight for the Sylvan doesn't stay in when folded. The Law one does have a safety feature that holds it in but not the Sylvan. It might be do to patent infringement but not sure. And if you remove the plug, the gun won't cycle.
@@CosmolineDaydream also, if you fire the Sylvan folded, the plug will go flying. I've tested it at the range.
@@WoodsDog nope. Ha. I meant the weight in the BCG that’s held in place with a roll pin. Did you leave that in? If so, how do you keep the Sylvan plug from just wobbling out when it’s folded?
Picked up fm9 5 inch upper from glockstore....will pair with dirty bird lower from ar15 discounts......will get sbpdw brace at the end of the month.....will start off with mil spec trigger and go from there
I have the FMP-9 and the stock trigger isn't bad! I can mag dump a 34 in around 6 seconds with accuracy! I like the binary but it doesn't seem practical just fun!
@@MrGeeMoney1983 I'm using mine for home defense so binary trigger wouldn't make sense for me
@@sifer5913 Mine is Fun first and Home Defense is need be. I'm trying to suppress it now hopefully I don't have to wait a year to get it.
Boy, you need a hand stop before you lose a finger lol
Thought the same 😂 Suppressor would do the job too
With the Sylvan folder, did you have to take out the weight in the FM9 bolt carrier?
Not that I can remember. Haven't seen that gun in a long time.
Thanks for making this video. I have an FMP-9 and an Echo ARII trigger I was thinking about installing in it. Watching your experience with the jams I'm not so enthusiastic about it. What brand magazines are you using? P.S. Mine came with a metal hammer and trigger.
Thx. The mags I used were Glock and a korean brand that I can't remember the name of. The Korean mags were really hard to load after 20 rounds unless you hit them on the mag floor plate.
Just bought mine today,do they all come with a binary trigger from the factory,i did not get a manual with mine
None of them come with a binary trigger. They are like half the price of the entire gun
Get the Echo II tune up kit. It shortens up the reset and weight.
In the first clip, lean forward a bit as if you’re firing an SMG, that’ll help with the recoil 😉
Could you do video installing the folding adapter
I might do one in the future. I had the footage for it on my 300 blackout but wasn't happy with how it turned out.
4:15 probably bolt bounce
Thx
Nice review. Any issues out of the box? Hows their customer service?
Just the plastic hammer and my buddy's experience. Other guy said his came with a metal hammer
@@WoodsDog Oh ok. I love my FM-9. No issues with it at all.
Can those 2 screws that hold the buttstock tight be loosened & the buttstock be pulled out to make it longer or does it have to stay pushed up all the way,in other words,can the buttstock screws be loosened to make the buttstock longer for a better fit.
yes. they don’t give you an allen key tho
@@niquemarshall i just want to make sure if i adjust it to a length i need that crap wont go flying everywhere lmao,appreciate the info.
@@summers9911 yeah it’s got 6 positions
@@niquemarshall is there a better buttstock for this firearm or at least a rubber pad for it,i took it out last week & it made my shoulder raw lol.
@@summers9911 yeah you gotta use the sba3 brace. foam pad won’t fit the tube tho
What is the thread pitch on that barrel?
1/2 x 36
The hammer was plastic?? Did you physically see this hammer? There's no way there was a plastic hammer on your friend's gun, no way! By the way I have an FM 9 and I love it!
Did it just jam?
could be from ammo, they say don’t use steel
What binary trigger did you used ?
Echo trigger 2
What pistol grip did you switch to?
I think it's a standard Magpul
Reliable...??? Huh it jammed every few shots
Mine has yet to jam, you just don’t know how to shoot.
he was also using steel case ammo and they say not to, idk if that’s the problem tho
If he careful not to blow your finger of thumb off doing the Tatical C clamp hold😅😂
Please don’t use that on squirrels man!! Squirrels are our friends!!!!!!!
Besides you don’t want bits of squirrel all over your property??
True. The other squirrels would be attracted to the bits and start eating it 🙂
Squirrels are eating my garage from the outside in. Chewed the power for my overhead door just this week. Gonna be a rodent genocide over at my house this weekend