Wonderful design, craftsmanship, and attention to detail. The combs must be highly treasured by those that own them. Thank you for sharing this master’s creations.
i am happy to see one who like me tune his sawblades. I also made a micro bending device the bend the teeth of the sawblade alternating left and right to be able to cut smooth curves. Hardening is the last operation
Thank you for your comment. First, please understand in advance that I am a videographer, not a performer in this video. The saw he uses has straight teeth at first. He shifts these teeth, one by one, right, left, right, left.... By doing so, he will be able to use that saw to cut wood cleanly. This scene is the setting of the saw teeth. I have no idea why the saw is roasted over a fire. My apologies.
I know you asked this question a year ago but essentially he anneals the blade for 2 reasosns. As I'm sure you already know, hardened metal is more brittle than it is when annealed and with that in mind, a saw blade as thin as the one he's using is extremely easy to snap when hardened. When he's threading it through the holes in the wood you can see just how flexible the blade has become. Also whilst sawing the wood he's pushing and pulling against the blade which would, again, snap very easily if it were still hardened. He doesn't really need it to be hardened since steel will still cut wood when softer and he's making his items out of wood that is quite thin anyway and easy to cut. The second aspect to this is that he anneals it in order to soften the blade for sharpening the teeth of it. This way he makes each saw blade last longer. He may have even hardened it again off camera depending on whether he can use it that way or not but I think what I've said here is the truth overall. ☺👍
@@stewanish I think he's using boxwood so it can be tough on tools and will make them blunt over time so I guess he files the saw blades lightly every day or every week to keep them sharp and make the cutting a little easier.
すごくきれいでびっくりしました。お給金コツコツ貯めて買いたいと思います。素敵な出会いをどうもありがとうございます。
動画をご視聴いただきありがとうございます。
安いものではないので気軽に買えるものではありませんが、手入れをすれば一生ものになります。ご購入したら、ぜひ大切にご使用ください。
Wonderful design, craftsmanship, and attention to detail. The combs must be highly treasured by those that own them. Thank you for sharing this master’s creations.
That coping saw work is incredible!
Beautiful artistry. Master craftsman 🔥🔥🔥
すごくいい技術で、可愛くて素敵なつげを作りましたね。素晴らしいです。
また日本に行けたら、そのつげを買いたいです。
後、動画の音楽が好きで、アーティストを教えてくれませんか？
ありがとうございます。
工房は福岡市にあるので、近くにお越しの際はぜひ立ち寄ってみてください。
今回のBGMは、Audiostockというサイトで購入したものです。
動画制作用のBGMのため、CDを買って音楽を聴いて楽しむような方向けのものではありませんが、参考までにURLを記載しておきます。
もし気になるのであれば、サイトを覗いてみてください。
1曲目
audiostock.jp/audio/223880
2曲目
audiostock.jp/audio/878966
@@Workers_in_JAPAN
昔、福岡に住んでいましたので、もちろんみに行ってみて、彼女にプレセントで、告を買います。
BGMを教えてくれて本当にありがとうございます！。
またビデオを楽しみにしています。
Wow! such big and straight piece of boxwood! My hedge would not yield such nice pieces!
動画で作られている櫛の子犬バージョンを購入しました！
細かい技術に惚れ惚れ、ずっと眺めていられる美術品です。
なのに実用性もあるなんて…最高ですね∩^ω^∩
コメントありがとうございます！
動画をご覧になって購入を決められたのでしょうか？私の動画がきっかけで新しい作品との出会いがあったのであればとてもうれしく、撮影をしてよかったと思います。
使うのがもったいなくなるような作品ですが、つげの木から作られた櫛は髪にもいい影響を与え耐久性にも優れているそうなので、長く大切に使っていただけるとうれしいです^^
すべて手作業なのですね。
コメントありがとうございます！
櫛を作る工程は見ていないのでわかりませんが、透かし彫りを施す工程はすべて手作業でした。
そのため、動画では伝わりづらいかもしれませんが、1つ作るだけでもかなりの制作時間や手間がかかっていました。
i am happy to see one who like me tune his sawblades. I also made a micro bending device the bend the teeth of the sawblade alternating left and right to be able to cut smooth curves. Hardening is the last operation
he didn't tune it. He made the saw blade.
Чудесная работа
super
Hi can I know why you anneal the saw blade before cutting? Also why you offset the saw blade teeth? Thanks!
Thank you for your comment.
First, please understand in advance that I am a videographer, not a performer in this video.
The saw he uses has straight teeth at first. He shifts these teeth, one by one, right, left, right, left.... By doing so, he will be able to use that saw to cut wood cleanly. This scene is the setting of the saw teeth.
I have no idea why the saw is roasted over a fire.
My apologies.
Ok thanks amazing saw teeth are so fine yet able to offset it.
I know you asked this question a year ago but essentially he anneals the blade for 2 reasosns. As I'm sure you already know, hardened metal is more brittle than it is when annealed and with that in mind, a saw blade as thin as the one he's using is extremely easy to snap when hardened. When he's threading it through the holes in the wood you can see just how flexible the blade has become. Also whilst sawing the wood he's pushing and pulling against the blade which would, again, snap very easily if it were still hardened. He doesn't really need it to be hardened since steel will still cut wood when softer and he's making his items out of wood that is quite thin anyway and easy to cut.
The second aspect to this is that he anneals it in order to soften the blade for sharpening the teeth of it. This way he makes each saw blade last longer.
He may have even hardened it again off camera depending on whether he can use it that way or not but I think what I've said here is the truth overall. ☺👍
Thanks for the late reply :) I understand the reason to soften the saw blade because he files the blade again, not sure why?
@@stewanish I think he's using boxwood so it can be tough on tools and will make them blunt over time so I guess he files the saw blades lightly every day or every week to keep them sharp and make the cutting a little easier.
持っていたつげの櫛が割れてしまいました。修理はされていますか?
コメントありがとうございます。
当チャンネルは、様々な作家さんのお仕事の様子を撮影させていただくチャンネルとなっております。
そのため、動画内に出演してくださっている方とチャンネル運営者は別となっており、出演者に対する質問等にお答えすることはできかねます。
お手数ではございますが、つげ櫛修理のご依頼・ご質問等は、直接匠工芸にお問い合わせくださいますようお願いいたします。