are the red parts on the shoulder intended to be loose? and is the white/red part below the cockpit is hit and often times removed when the cockpit itself is being opened? just started building mine tonight and encountered those issues
@@JaniumCanium instructions probably said *click*. I wasn't sure since I had to push to the point it hurt and felt like breaking. Both mecha gaikotsu and gaijin gunpla got it wrong, too.
This looks absolutely fantastic! I bought one and i was just looking at videos before I get started. The one thing that bugs me is that you can't sand off the nub on the chrome sword, oh well.
@Nibras Yunus yeah. Matter of fact, i'm pretty sure BANDAI's fine tip panel liner is essentially the same thing. I don't use it anymore, since i recently bought a bottle of TAMIYA panel liner black.
@Nibras Yunus i've only ever built 1 RG, but it was a really simple build. The RG Unicorn is a good place to start because it doesn't have the same complexity of a modern RG, but it's inner frame isn't loose either. Just don't go for the banshee norn, since the shield weighs down on the shoulder, and the joint on mine cracked. As for panel liner, i currently use Tamiya's bottled panel liner, but i've also never tried BANDAI's markers.
i just started mine so for teh shoulders is it the shoulder caps or the small red parts or do the red parts fit in along with the shoulder pads? i have a hard time fitting them in
Aron Ashurov a top coat can be kinda useful as for me I don't use spray cans cause I don't wanna get any toxics or anything, I use Vallejo matte varnish out of the dropper and I thin it with a tiny bit of water and brush it over my model giving it a matte finish look to it or you can get gloss varnish which makes your model look glossy as far as difference in not using it it's not a major difference in my opinion just panel line it if you can't get a top coat and you should be fine hope this helps
This might be late, but you could just go to your local hardware store and look for one that’s compatible with plastic. A can of clear top coat, matte or gloss, should just be around $2-$3. $4 to $5 at most for the more expensive brands.
BTV swagger well, you do need something to cut the parts out of the runners. And then you need to clean off the excess spruce. And if it’s not under gated, you need something to clean the nub marks. That’s for starters. Pro builders and customizers would probably have an entire garage worth of tools and kits for building their gunpla.
![[REVIEW] RG 1/144 건담 아스트레이 레드 프레임 - Gundam Astray Red Frame](http://i.ytimg.com/vi/5Grb1VSsqWI/mqdefault.jpg)
![[REVIEW] RG 1/144 건담 아스트레이 레드 프레임 - Gundam Astray Red Frame](/img/tr.png)
![CAMPปลิ้น | รวม Highlight 2024! PART [1/2]](http://i.ytimg.com/vi/6hnvNnvYloU/mqdefault.jpg)
I am not so fun of building gundam but this channel motivated me to buy and build one.
NICE
Same
Why you buying model kit if you don't want to build it
It's literally the purpose of model kit
I suppose you could buy second hand
You won't regret it
what is the fisrt gundam
I’m not even a fan of gundam, but I love these build videos
Yes bro
This RG is actually my first Gunpla ever and this video is a nice reference! Thx.
I am having trouble with the shoulder part. Is it possible to show you did that part?
Building it rn and struggling with the shoulders lol
I didn’t get it yet and yall r making me scared about the shoulders… 💀
3:19 how did you put the shoulder pieces on the arms im struggling
Parabéns ficou muito bom!!!
The music makes me think of the old show "How its Made". So I guess this would be How it's Made: Gunpla Edition?
are the red parts on the shoulder intended to be loose? and is the white/red part below the cockpit is hit and often times removed when the cockpit itself is being opened? just started building mine tonight and encountered those issues
5:06
Do I have to force this part in?
Yes lol
Yes until you hear a click. Take note that after doing so, the torso part is almost impossible to separate from the waist part
@@titan133760 That sounds unpleasant.
Instructions are Instructions.
They give exactly what to do.
@@JaniumCanium instructions probably said *click*.
I wasn't sure since I had to push to the point it hurt and felt like breaking.
Both mecha gaikotsu and gaijin gunpla got it wrong, too.
Chào, tôi là người Việt Nam tôi thấy video bạn rất hay :) nên cố gắng đầu tư máy quay để chất lượng tốt hơn
나중엔 결국 꽤 헐거워 지는데 그건 rg에 한계라고 생각합니다
This looks absolutely fantastic! I bought one and i was just looking at videos before I get started.
The one thing that bugs me is that you can't sand off the nub on the chrome sword, oh well.
You could, sand it down to where it's perfect, and paint the sanded area with a chrome paint. Testor model master makes one
Is the inner leg hard to build?
i think all RGs comes with pre-built inner frames, that's why he didn't show the assembly of the inner frame
@@ersyadiaz Until the RG Tallgeese came along.
@19 Adarsh Kandan Parthiban Oh, that too.
지금 이거 조립하고 있는데
이거 보고 하니까 좀더 편해져요
i am love this kit just only a watch this video, this design is very awesome !
뭐야....뭐야...! 뭐냐고!!!
이게 뭔데 조립만 하는데 재미있어서 내가 계속보게 만드는거야!!!!!!
What really interest me here is not just the look and the details but also of how solid it is
Ayem Gyuruku god, I wish it was.
@@jegtano7079 does it get loosen overtime?
Wait it's not solid ?
@@MizukiDraws123”wait it’s not solid?” I felt the fear you felt-
Already bought the gold astray frame and next gonna be this😍😍
I love this gundam...
이분 영상은 편안함..
어... 한국사람이네... ㅇㅈㅇㄴ
You make it looks easy...
Because it is
could you do fast build for older RG kits such as Seed lineup please?
벌써 8년전이네…..시간 참 빠르게 가네요
Nice gundam :)
Are his hands red from the plastic, or from pressing all the small parts together?
do you top coat it with all the parts attached or you coat it part by part?
HOLY SHIT they have bottles of ink JUST for panel lining? *O* I needs thissssssss
Mystic2760 same
I just use a sharpy. Call me cheap, but it works. And no, not the regular ones, the fine tip ones.
No toxic
@Nibras Yunus yeah. Matter of fact, i'm pretty sure BANDAI's fine tip panel liner is essentially the same thing. I don't use it anymore, since i recently bought a bottle of TAMIYA panel liner black.
@Nibras Yunus i've only ever built 1 RG, but it was a really simple build. The RG Unicorn is a good place to start because it doesn't have the same complexity of a modern RG, but it's inner frame isn't loose either. Just don't go for the banshee norn, since the shield weighs down on the shoulder, and the joint on mine cracked. As for panel liner, i currently use Tamiya's bottled panel liner, but i've also never tried BANDAI's markers.
Nice details and nice style
Nice vid dude, how long you can build this rg until top coat finish?
So cool,man. I want to buy it.
What a nice art 😍
3:30 are the red plates you add to the arms to connect to the body meant to be loose because I couldn't find a place for them to connect
That's my question to and I kind broke the arm pice
Same they’re no way for them to stay in place that I’ve noticed at least
영상을 보니 먹선을 넣은게 너무 멋지네요.....혹시 먹선을 넣는 꿀팁 이라도 있나요?
+천범 개인적으로 타미야 액센트 컬러를 사용하는 것을 선호합니다. 그저 몰드에 쿡쿡 흘려넣어주시기만 하면되요. 다만 한부분에 많이 사용하면 부품이 바스러질 수 있으니 조심하세요.
+BUILDERs TV 좋은 답변 감사합니다
+BUILDERs TV 저 영상에서 번지는 걸 면봉으로 닦던대 그냥 면봉으로 닦아주면 되나요?
+천범 아니요 먹선지우개를 사서 뭍힌후에 닦아주시면 됩니당(대신잡답변 죄송합니다)
천범 기본적으로 타미야 패널라인 엑센트 컬러는 에나멜 도료이기 때문에 면봉에 에나멜 신너를 묻혀서 지워주셔야해요
먹선은 시작할때 런너에 넣는게 나아요? 아니면 끝나고 넣는게 좋아요?
런너에 먼저 넣는게 낳습니다.
그래야 번거로움 없이 넣을수있죠ㅋㅋㅋ
cool building
Do I have to seperate the limbs and parts to top coat a gunpla? Or is it ok to just spray without seperating?
i just started mine so for teh shoulders is it the shoulder caps or the small red parts or do the red parts fit in along with the shoulder pads? i have a hard time fitting them in
do u let the panel line ink dry before wiping off the excess?
말보루 레드하고 색깔이 상성이 잘맞네요
+이동규 그런가요? ㅋㅋㅋ
네 아주잘어울리는데요?
BUILDERs TV 담배 피시나요??
I bought this today and by the way I’m making sure how big is it?
I don't have tools, so for the stickers I normally use beam effects to put the stickers on.
Th3Ep1cL1z0
d i normally use my identity card or driving license
Does that work really good?
Good idea👍
Fam just use a toothpick
And yes this is two years ago lmao
I love your videos. Thanks for sharing. 😄
Cool vids builder-chan
how tha panel lining ink in yen
I don't now
This is so damn sick.
Is this kit easy to build for begginers
*beginers
*beginners
토파렌즈가 안에 들어있나요?
that packet of cigarettes got me 🤣
7:38에 칼은 개별인가요 포함되어있나요? 그리고 먹선 물감?같은거랑 에니멀 신너는 어디서 구매하셨나요?
선희 한 대신 답변 죄송하고요 일단 칼은 같이 동봉 돼있고 페널라인 엑센트랑 신너는 건담샵이나 인터넷 찾아보시면 아마 있을거에요.
This is my favorite Gundam
고맙습니다
great video.....thanks for the up-load bro....
I think u should start putting the amazon link in the description
Lucky you, he has.
how much you spend your time to build this RG astray ?
Its kinda long , but its easy.
It took me 4 hours to build, 3 hours to decal, 1 hour to panel line. 8 hours in total, 3 days of span.
y cant i get the shoulder armour to fit in the shoupder?
If I can't afford topcoats, will it make a difference not using it?
Aron Ashurov a top coat can be kinda useful as for me I don't use spray cans cause I don't wanna get any toxics or anything, I use Vallejo matte varnish out of the dropper and I thin it with a tiny bit of water and brush it over my model giving it a matte finish look to it or you can get gloss varnish which makes your model look glossy as far as difference in not using it it's not a major difference in my opinion just panel line it if you can't get a top coat and you should be fine hope this helps
This might be late, but you could just go to your local hardware store and look for one that’s compatible with plastic. A can of clear top coat, matte or gloss, should just be around $2-$3. $4 to $5 at most for the more expensive brands.
Good
I built this one and the waist part broke and can’t be refined so know I spent all my savings on this so I have to wait to buy the same one again 😓😓😓
So I’m guessing that the HiRes kits are almost 1/100 versions of RG’s
a good video .i think you should do a video about PG gundam
great video
+rick stevenson really thanks ^^
+BUILDERs TV I always enjoy your videos they're unique and your nuts lol
+rick stevenson You'll see more unique videos in near future, bro!! Keep watching my videos!
+BUILDERs TV i will do bud. I also have a channel blog building a perfect grade unicorn and other kits
먹선칠하고 면봉으로 닦을때 면봉에 아무것도 안뭍히시고 닦은건가요?
에나멜 신너 발랐습니다 ㅋ
+BUILDERs TV 아세톤으로지워도되요?
TH-cam FPS 안되지 않나요? 전 잘 모르겠네요..그래도 않되겠죠
나도 같고싶다...그리고 뿌린 스프레이는 먼가여??
마감제라고 무광 탑코트입니다 ㅎ
원래 저거 먼저 뿌리고 페널라인하는건데?
nice bro!!! next fenice gundam plz.....:D
+Prime28 Falcon You know? It will be taken, near future! Keep watching! :D
무광마감제 뿌리신건가요?
습식 데칼과 일반 데칼에 차이점 좀 알려주실수 있나요?
1.어떻게 생겼는지
2.어떻게 사용하는지.
습식데칼은 모양은 판에 조금하늘색?보나진한색 느낌이구요! 습식데칼은 데칼을 물에 뭍이셔서 사용하실수있구요!습식을 제대로붙이려면 습식데칼전용 마크세터라는 본드를 사용하셔야됩니다!!일반데칼은 건식,테트론씰, rg에는 리얼리스틱데칼로 나누어집니다!
아무것도안하고
Anyone out there.. I need help.. I have a problem that when I connect the sword on the thigh, the thigh part keeps falling off..
잘빠지는부분이 있을까요?
듣기론 허리가 액션포즈시 자주 빠진다고 ,,
Does anyone have the name of the song that starts at 7:10?
Darude Sandstorm
can you review star build strike gundam
이거 마감제 뿌릴 경우 단점이 있나요?(예:관절이 안 좋아진다.등등)
단점은 마감이 실패해서 백화현상이 생길 수 있다. 관절이 조금 뻑뻑해질 수 있다 정도겠군요.
+BUILDERs TV 감사합니다^0^
+BUILDERs TV 관절이 뻑뻑해지면 좋지않나요? 고정성도 좋아지고..
+ED R 또 있다면 먹선이 번진다거나 콩팅파츠는 코팅이 녹는다거나가 있죠
고기
딱히 어럽진 않은데 데칼이 매우 작은 것이 많기 때문에
그것만 주의하시면 될것같습니다.ㅎㅎ
저이거팔에끼는거어떻게해야할지모르겠어요
What's the black stuff that you use for panel lining? Is it just ink?
+Erick Arias-Lopez please refer '30,000 subscribers video'
Its tamiya panel line accent color you can buy it on any hobby shop that has tamiya or you buy it online
all those decals are already in the package?
Excelente gran video
+Benjamin Pajares Cosme Gracias!!
제가 아스트레이 콕핏트를 열때 바로밑에 흰색파츠가 데이면서 껄어져서 제가 데이지않게하려고 사포로 흰색파츠 윗부분을 깍았습니다 그러니 콕트는 ㅊ가 떨어지지않고 잘열리지만 안에 허리프레임이 아주약간 보이더라고요 그래서 살짝 정상rg는 흰파츠랑 콧핏해치부가 완전히 붙어서 안쪽프레임이 보이지안는데 전살짝허리프레임이 보여요 제가 흰파츠깍는게 잘한선택일까요?ㅠ
..그건 아마....도박일걸요..?
can you do a video on sengoku astray gundam 's building....
Gonna buy this kit
does that leg frame comes as it or we have to build it?
you didn't show that process
It comes lije that
Like that
how high is this in inches?
TheGoldenJohn i
It should be 5 inches, I think
You know hg? That high
Nice Gunpla :D..
hey..where can buy that panel line ink???
thanks :)
ebay sells a lot of it
i like gundam astray red frame
What Is the utility of the spray topcoat?
How to know original quality or not? I did mine but not sure how to know it is ori or nnot
Is it still good if i use gundam marker for lining on this gundam type?
super cool!
Очень классно. Обязательно себе подобного робота закажу =) спасибо за видео.
+Bratishkavideo Пожалуйста. Спасибо за просмотр. Пожалуйста, подпишитесь,: D
+BUILDERs TV С удовольствием подпишусь =))
Bratishkavideo Спасибо, парень. Увидимся с прохладной видео, в ближайшее время.
Have you done a epyon
Is that actually how you top coat this thing?
What are these ? 3D puzzles, or Transformers ? Ma.K ? Never seen these before
레알 진짜 완전 갖고싶다
이거 어려운가요?
저기 페널라인 먹선넣으시고나서 신너 쓰시나요? 급해요ㅠㅠ
+승원차 네 에나멜 신너써요 ㅎ
BUILDERs TV 감사합니닷
Can someone tell me if you need the tools to build a Gundam or can you just build without anything???
BTV swagger well, you do need something to cut the parts out of the runners. And then you need to clean off the excess spruce. And if it’s not under gated, you need something to clean the nub marks. That’s for starters. Pro builders and customizers would probably have an entire garage worth of tools and kits for building their gunpla.
should i get this one or the mg
Thắng Bùi you should get the rg one
what type of top coat do u use?
Its flat matt
와진짜잘만드신다
Who’s back here to compare the RG astray and the MG astray???
builders tv pls make a vidio from sengoku astray gundam
혹시 받침대 포함되어있는건가요?
웬만한 제품은 별매입니다.
WOW😍😍😍😍