Thanks for the info Devin! Great video and instruction, your note page was a big help! You've sure done your homework! Now I can check all the codes and see what's wrong. Also regarding your spark issue, obvious but don't forget to change your spark plug. Mine developed hard starting and no idle, would drive around 1/4 to full throttle fine. Changed the plug and problem gone! Same with my lawn tractor, very hard to start but would run and idle all day, new plug and now starts up easy every time. Hope this helps and you get 'er running Devin - Cheers!~ Bellarmine
What do you mean the lean angle was back to front from what you had written down? Maybe your LA sensor is buggered and that's why there's no ignition. Mine is showing 1.0 and I have ignition.
Check your incoming spark plug wire. A guy who worked on mine grabbed the wire and not the boot and it cracked the inside carbon wire and it didn’t have a spark. I changed it and it cranked right up.
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
Thanks for the info Devin! Great video and instruction, your note page was a big help! You've sure done your homework! Now I can check all the codes and see what's wrong. Also regarding your spark issue, obvious but don't forget to change your spark plug. Mine developed hard starting and no idle, would drive around 1/4 to full throttle fine. Changed the plug and problem gone! Same with my lawn tractor, very hard to start but would run and idle all day, new plug and now starts up easy every time. Hope this helps and you get 'er running Devin - Cheers!~ Bellarmine
What do you mean the lean angle was back to front from what you had written down? Maybe your LA sensor is buggered and that's why there's no ignition.
Mine is showing 1.0 and I have ignition.
I have the exact going on with my 550, did you find the cause of no spark?
Do those numbers Change as you ride the bike automatically or is this something you have to check every day on your own?
I am curious as I know I seen a video how to test the idle air sensor - Isn’t there a way to make that exercise as well?
Check your incoming spark plug wire. A guy who worked on mine grabbed the wire and not the boot and it cracked the inside carbon wire and it didn’t have a spark. I changed it and it cranked right up.
My cluster is showing a E . Is there any place to have it repaired
How do you clear a code?
What does a code 39 mean
can you check rpm in test mode? and also how do you get out of test mode?
Same way, hold the 2 buttons at the same time.
Or just turn the key off.
Good shyt brotha
What does the codes mean on d 61
That is what fault code you are tripping. Example crankshaft sensor is #12
Helped me
Weres the alot of videos .
Yamaha grizzly 550 top speed