I am a full-time trader. Support to earn extra income every day. *** If you need support for daily trading signals, or if you want to copy from the ad, you can open an account using the following link. + If you want effective trading signals, register with DOO Prime:my.dooprimeapec.com/vi/links/go/33957 + If you want to copy from ad, register with Exness:one.exnesstrack.net/a/cneq3igfzi *** Note: + After registering, please contact Ad for support in joining the signal group. and install copy. - Support: facebook.com/khac.hung.1291/ - Support phone number: 0978346963
So I am looking at this to make a add on powered sub for a portable speaker. We're can I find this driver and the amp module and battery unit ?. Great build.
The strong side of this structure is the increased radiation resistance in a limited frequency spectrum, but the weak side is the insufficient dissection of the primary flow from the front of the cone of the loudspeaker head. There it is possible and necessary to increase the primary resistance of the transmission line.
Nice design even though the bass hasn't kicked me off the feet, some stuff you could also have made more precise, also keeping the driver being close to your work while sanding isn't concidered as the best idea either, but you have a like, and please keep up this great kind of videos!
Баса ноль, бубнелка какая-то. Этот динамик сюда вообще не подходит, для него нужно другое оформление. А этот корпус должен быть большим для динамиков 18, тогда эффект возможно будет
Задумка хорошая, но реализация хромает. Автор видимо физику совсем не учил. Баса нет так как динамик сам себя гасит. Фазоинверторы нужно было делать немного по другому.🤔🤔🤔
@@YdjinOgreRussia Не согласен с вами. Эта конструкция увеличивает сопротивление излучения определённого спектра частот, достаточно быстродействующая. От таких конструкций требуется не бас, а высокая амплитуда импульса в рабочей полосе. при малом перемещении диффузора. На АЧХ имеется горб сопротивления излучения. Это не про музыку, это про драйв. Такого рода излучатели не являются самостоятельным решением ВСЕЙ басовой секции, но как подспорье - вполне годны. Например, 4 таких блока в сочетании с другим сабвуфером могут быть успешно использованы на дискотечном стенде инсталяции, или как подставка для инструментальной колонки баритон гитары. Там эти неизбежные "хвостики" не мешают.
Thùng thì rõ to mà củ bass sub thì bé tí Trầm thì ko nói chứ mà Uy lực thì chắc âm bé tí tẹo ??? Thiết kế thùng to tổ bố mà chơi cũ sub bé tí thôi nghỉ khỏe
I am a full-time trader. Support to earn extra income every day.
*** If you need support for daily trading signals, or if you want to copy from the ad, you can open an account using the following link.
+ If you want effective trading signals, register with DOO Prime:my.dooprimeapec.com/vi/links/go/33957
+ If you want to copy from ad, register with Exness:one.exnesstrack.net/a/cneq3igfzi
*** Note:
+ After registering, please contact Ad for support in joining the signal group. and install copy.
- Support: facebook.com/khac.hung.1291/
- Support phone number: 0978346963
I love how all these people are being critical about the precision of your work when it looks like you're just having fun, keep at it buddy 👍👍👍
Indian, Philippines DYI always make me laugh ;) It is naive but funny.
I thought you was building a subwoofer until I got to the end. I'm so confused now. Lol. Nice construction, interesting. Thank you
So I am looking at this to make a add on powered sub for a portable speaker. We're can I find this driver and the amp module and battery unit ?. Great build.
Thank . I love you
The strong side of this structure is the increased radiation resistance in a limited frequency spectrum, but the weak side is the insufficient dissection of the primary flow from the front of the cone of the loudspeaker head. There it is possible and necessary to increase the primary resistance of the transmission line.
Оспади, сколько сил и материала тратит этот чувак, в итоге каждый раз одно и то же по звуку получается
Amigo, no me digas que el altavoz quedó con la suspensión sobre la madera ???
You really could make some money selling your cut files if you did some proper testing of your enclosures and showed the results.
Thank you
Для сабвуфера нужно более толстые стенки короба тогда он зазвучит, а так не плоха, пойдет для сельской местности))
plywood or mdf ? that doesn't seems like mdf for me
It looks like you were trying to make a tapped horn. Needs more designing though. You also will need a mid driver and tweeter. Interesting though.
Thank you
kkkk pelo jeito tem gente que nao sabe o que é SUB
Was ist das für eine Fräse die du benutzt???
Cooles Video, wie immer
Loa này dùng mạch nào đánh đó ad.
Great job brother 👍👏👏
Thank you
უმაგადესია 👍
If possible, make Indonesian products with CLA boxes
excellent ... it sounds good ... it feels like it gives very good audio output ..
Mirip box parathel nya faskho sengok atau dragon nya brewog atau box nmax
Very good info. Never seen before.
Quanti DB tira fuori questo SUB ??????
friend I'm sorry but I see so many errors. I think the cabinet rumbles too much and spoils the sound
Thank you
Sir, The next video's, i'm Request Sound a "Dj Ass Down" and "Dj Bando-Bando", Okeyyy
Thank
@@kingmakespeaker1402 yes
Bose enclosure design sounds great...you cant identify where tha sound coming from so soft.
Củ loa Harman Kardon gì vậy bạn.
Uar3
I want to buy this
Using mid range to low range quality let me suggest those qualified speakers to get its exact dynamics
Anh dùng loa vi tính có mạch dùng điện 220v chế thành loa bluetooth đi anh 💛
Thời giờ ai dùng loa 220v bạn ơi giờ toàn dùng pin 3s 4s tiện lợi nhỏ gọn dễ mang đi
@@hien6303 thế mới nhờ ảnh làm loa thời đó chế thành loa bluetooth cho gọn đó bạn
Tưởng đâu bạn kêu giờ chế loa chạy 220v chứ 🤣
@@hien6303 ui giời do bạn tay nhanh hơn não đấy :))
@@minhbetanhuynhthi1541 do rõ ràng bạn nói chế loa 220v thành loa bluetooth chứ tay não gì ở đây :D?
Có loa nào thanh lý ko a ơi
Very impressive
Ad nên thêm tiêu đề tiếng anh cho người nước ngoài họ đọc.
Ad nhiều tiền vậy lúc nào cũng chế loa
Co ban ko anh
its paraflex box, subwoofer not adapted, good build👍
Thank you
Nice design even though the bass hasn't kicked me off the feet, some stuff you could also have made more precise, also keeping the driver being close to your work while sanding isn't concidered as the best idea either, but you have a like, and please keep up this great kind of videos!
Баса ноль, бубнелка какая-то. Этот динамик сюда вообще не подходит, для него нужно другое оформление. А этот корпус должен быть большим для динамиков 18, тогда эффект возможно будет
Что это было?
Задумка хорошая, но реализация хромает. Автор видимо физику совсем не учил. Баса нет так как динамик сам себя гасит. Фазоинверторы нужно было делать немного по другому.🤔🤔🤔
@@YdjinOgreRussia Не согласен с вами. Эта конструкция увеличивает сопротивление излучения определённого спектра частот, достаточно быстродействующая. От таких конструкций требуется не бас, а высокая амплитуда импульса в рабочей полосе. при малом перемещении диффузора. На АЧХ имеется горб сопротивления излучения. Это не про музыку, это про драйв. Такого рода излучатели не являются самостоятельным решением ВСЕЙ басовой секции, но как подспорье - вполне годны. Например, 4 таких блока в сочетании с другим сабвуфером могут быть успешно использованы на дискотечном стенде инсталяции, или как подставка для инструментальной колонки баритон гитары. Там эти неизбежные "хвостики" не мешают.
gỗ này mua bao nhiêu tiền1m vậy a
I think this is a Multimedia Speaker than the Stereo one
this is a smaller build of cyclops enclosure. 😁
Thank you
Quá hot luôn . Tuyệt vời !!!
Cảm ơn b
Lại gặp idol ở đây
@@thanhlongnguyen545 hihi
Những bass. Siêu trâm nên chế ngược như vậy nghe mới ấm chứ nghe mỗi tiếng trước ko đk hay
Thấy cũng lạ, cũg k pít thiết kế như vầy có ok k
Waiting for a kind hearted person who actually want to support me from his heart ;-)
Thank you
Estava se tornando uma caixa muito bonita até colocar a tela verde e o péssimo acabamento elétrico 😒
Thank you
Die Konstruktion ist interessant aber der Sound ist sehr schlecht.😟
Interesting design but that isn't MDF
en.wikipedia.org/wiki/Medium-density_fibreboard
Loa đấy là loa mid bass. M có phân biệt đc loa sub và loa mid bass k ?
bạn lại ngáo r bạn có nghe nó có đánh tiếng trầm không đâu mà có một xíu trép vs bass mà bạn nói nó là loa sub ?😂
@@OxMinos. bác đang nói mình hay nói thằng chủ kênh vậy ?
@@maymetvoichung7565 anh dai nói em ấy à
Meniru skema box indonesia ini
Hrj pro audio,,, Riswanda audio
very tight sound.
Thank you
17:10
Z
👌
it seems that mid and high frequencies almost non-existent
You made a nice maze import but installed your speaker the wrong way! That thing would hit twice as hard if the sub was installed the other way.
Yes lol
Subwoofer 400 -hz!! This is a twitter not bass!!
Chơi sub sẽ hay hơn là full
👍
👍👍❤️❤️❤️
Gostei
Wonderful
Super
Thank
I dont hear the bass
...
Cyclops speaker design, small cve 18 cyclops
Thùng thì rõ to mà củ bass sub thì bé tí
Trầm thì ko nói chứ mà Uy lực thì chắc âm bé tí tẹo ???
Thiết kế thùng to tổ bố mà chơi cũ sub bé tí thôi nghỉ khỏe
No details 🤔
😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁
低音炮？
Hello
Sound weird..
Thank
Mirip box dragon nya brewok
Thank you
bad sound and low quality
Thank you
Noi chung khong hay
Worst grill ever
Thank you
Suaranya mendem 👎
Gość robi wszystko od dupy strony
👎👎👎👎👎