4G63 Cam Degreeing In Car - How To Degree a Cam 2019
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- DISCLAIMER...I AM NOT A PRO. This is my hobby and i learn as I go! I am not responsible if you get this wrong as you can cause pistons to touch valves. Be sure to verify piston to valve clearance.
Follow along as I degree the cams in my 4g63 Talon. You will need a couple of things to do this.
Top Dead Centre Tool: amzn.to/2UastnK
Degree Wheel: amzn.to/2Nx6GEc
Dial Indicator: amzn.to/2Ehiypx (this will work better than what i was using)
Once you have the tools you find top dead centre and make sure your degree wheel is showing exactly top dead centre. Then you proceed to set up the dial indicator to measure the lift at the valve on the intake and measure your open and close events at .050. Then adjust to match the cam card and repeat this procedure for the exhaust cam.
FACEBOOK PAGE: mealing.racing
Great informative video and I messaged this guy and he helped me out degreeing my cams even though he was super busy I really appreciate it man!!
Corey C cheers man!!!
Great video! This along with Jafros will be very helpful!
Excellent video! Great detail! I would have been lost without this video!!
Andrew Fouchier thank you sir!
I know this is an old video, but I wanted to share my results. I originally degreed my cams this way and then installed solid lifters to re-check. Both cams were only off by 2 degrees. So, doing it this way will definitely get you in the ballpark.
Hi, great vid...just wanna know where u bought that piston dial extension kit with spring? Thanks
Richard Lau there are links in the description. Cheers
Thank buddy
Subbed! Great content man.
Thank you!
What diameter degree wheel did you use? im going to be degrading mine in the car as well
Fantastic video, thanks for putting the time into making this as it's so helpful.
I just have one question that I cannot find an answer to anywhere - how do you actually mount the degree wheel? Do I need to buy a special tool. It looks like you have just drilled 2 holes in your degree wheel, with 2 bolts going into something?
Hey, sorry I missed this! I just used a couple of longer bolts for the crank pulley and bolted it through the degree wheel.
Great vid, cheers
Thanks 👍
Subbed, i have a 95 eclipse gsx that i should degree, makes 500hp but i feel it has a lil bit more to give lol
Awesome. That’s how I felt before. It just felt held back. Like it couldn’t breath up top. Thanks for watching. Tell your friends. 😜
Can you post links to the tools used?
Great vid man I subscribed
@@kurtbarnes6428 Thank you for that.
There are links in the video description