Epic Wireless Transmitter - CineView SE - Up To Four Screens Live - WT? | Matt Irwin

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ต.ค. 2024

ความคิดเห็น • 19

  • @RaymondParkerPhoto
    @RaymondParkerPhoto 2 ปีที่แล้ว +2

    This looks like a nice system. The software looks to be fairly intuitive; am I right? I may have a chance to try a similar transmitter. I'll keep you posted.

    • @MattIrwinPhotography
      @MattIrwinPhotography  2 ปีที่แล้ว

      Yes I have found it so far to be great unit, and I will be taking it out in the field over the new couple of weeks to test it out. Build quality, battery life and transmission quality all seem fantastic. And the dual band should minimise, if not mitigate drop outs. Software is very easy to use.

  • @charleslewandowski9037
    @charleslewandowski9037 ปีที่แล้ว +1

    No mention of relay to ATEM or laptop to streeming

  • @TerryKontopoulos
    @TerryKontopoulos 2 ปีที่แล้ว +1

    Nice gadget Matt! Can you control the camera from the pad? Android compatibility? (It IS Android COMPATIBLE!)

    • @jimbolic0809
      @jimbolic0809 2 ปีที่แล้ว +1

      I'd like to know this, too. I use a Mars 400s Pro and this function is not available, unfortunately. What I also dislike about the Mars is that the cable gets in the way of a wireless shutter release, too, so I cannot remotely hit the shutter button.

    • @MattIrwinPhotography
      @MattIrwinPhotography  2 ปีที่แล้ว +2

      Hi Terry, yes it is android compatible, I will have to double check but I don't think it offers remote control capabilities at this time. Cheers Matt

  • @ronboe6325
    @ronboe6325 2 ปีที่แล้ว

    I'm assuming you can tether your camera to Capture One - have you tested that yet?

  • @craigacdouglasphotographical47
    @craigacdouglasphotographical47 2 ปีที่แล้ว

    What is the cost of this product? Would be good for remote locations 🙂

  • @johnd5244
    @johnd5244 2 ปีที่แล้ว +1

    I could see possibly using it while I am filming aurora.

  • @neilseiffer
    @neilseiffer ปีที่แล้ว

    I record from my Panasonic S1H 4K DCI for film projects 4:2:2 10 bit all -I frames pro res 422HQ to my NINJA V. Can I output from my NINJA V to the transmitter so the receiver can show the on a director's monitor?

  • @bmwohl
    @bmwohl 2 ปีที่แล้ว

    Something nice for me to know about but I have no use case.

  • @ekphotography
    @ekphotography ปีที่แล้ว

    Thanks, Just a quick question, If my camera is shooting 60p 4K just the signal is downgraded to 1080 right? In other words the monitor will just show the 60p1080 but my camera can and will still be able to shot 4K 60p, right? thanks for any info

  • @speakdont2197
    @speakdont2197 2 ปีที่แล้ว

    cineview
    Is the camera recording setting set to 4k 120fps?
    Can you see it on the screen while recording?
    Isn't 1080p 60fps the limit?

    • @MattIrwinPhotography
      @MattIrwinPhotography  2 ปีที่แล้ว +2

      Yes it is possible to record on the camera at 120 FPS, and the CineView will transmit its maximum potential. Thus the camera and transmitter do not have to have the same settings. I believe I could be shooting on the Z 9 in 8K and still transmit via the SE, for all of the different types of monitoring purposes. Cheers Matt

    • @speakdont2197
      @speakdont2197 2 ปีที่แล้ว

      @@MattIrwinPhotography thanks for the reply

  • @MrDucatiPenigaleV4s
    @MrDucatiPenigaleV4s 2 ปีที่แล้ว +1

    First 1st.

  • @charleslewandowski9037
    @charleslewandowski9037 ปีที่แล้ว

    Hell no ! you should know better,