EXCELLENT videos which I saved for future use. You exhibit the motto of Mercedes, "Only the Best". Your son will benefit in so many ways, your family will be safer in the already safest vehicle ever produced, and I am now a loyal follower. Thank you for such thorough videos & your high morals in giving credit to those you have viewed and used for the right way to maintain any vehicle responsibly.
Awesome video!! I just did mine yesterday without removing the bumper, but I did use a drop cloth to cover the vehicle. The results were much better than I thought they would be. Thanks a lot!!!
I applaud the Car D. Ologist for an excellent presentation. Changing bulbs on the Mercedes is a hellishly difficult job. Removing the bumper is a small price in time to make to replace any or all the bulbs.
I love your videos - even those that I don't need to work on the vehicle. :) Excellent instructions with perfect images, and great narrative. I feel like I'm watching a surgery instruction video with a doctor commentary, like a cardiologist, for example. :))
I also restored the headlights on my 06 211 but i didnt remove the bumper..just used masking tape,3m restorer kit and finally ceramic coating to protect the finish. Easy as apple pie..no need to remove bumper
Excellent presentation and workmanship. You've given me the added confidence to do this project myself. A special thanks for your thoroughness in showing how to properly remove and install the bumper. Your effort very much appreciated.
Unfortunately, I’ve had to access my headlights three times (once to convert to HID, twice due to aftermarket ballast failures), and this video has been invaluable. But what I would suggest rather than restoring the original lenses is replacing them. I did this with my headlights when I converted them to HID. There are eBay sellers selling a very high-quality replacement lens from China. You have to bake the headlight to remove the original lens, then seal the new one with butyl. But all in all probably less work than buffing them out, and the results are stellar. Like new.
All you need to do is wet sand them and polish them. High speed polishing is the cure. Clear coat is a waste of money and more importantly you do not wax fresh paint or clear coat for at least one month depending on the product. If they're still foggy, its on the inside, in which case you need to heat the seal to open it and polish the inside the same way.
Nice job- many newer vehicles need to remove the bumper, I think the newer Jeep GC requires that. I have a 96 GC and the dealer wanted 55.00 for the Mopar restoration kit and I bought new ones on ebay for under 40.00. That's crazy $$$$ for new headlights Good idea that you replaced the bulbs while you had the opportunity Sucks about that inferior wire sheathing, especially when someone buys a MB, you know with any good thing many times there are negatives
Thanks for taking time to document the removal of the front bumper. I need to replace a fog light and this will make things much easier. Do you think the AMG sport package will pose any additional difficulties? P.S. The cost for the corner following headlight assembly is $1500 per side! They also have a special coating that keeps them fading as fast but also can not be polished out. I also recommend using dielectric grease when reinstalling the connectors. Not required, just recommended.
No sooner was I done with the brakes, new rotors front and back etc (Same car same year). etc. when one headlight failed. back up on the jackstands, off with the wheels, the flares, the bumper....might as well upgrade the lights, but: will this ever end???
What is so wrong with those dislikers mind ?? they are every where, to every video and in any action !! This video i would of consume it as a donation .... where were empty pockets have been so mean..!!
You can buy the lenses online. When you do that, then you really have something that LOOKS LIKE NEW. I sure as hell would not be happy with what he did. They really look bad!
Like your methodology. Wondering why you didn’t apply rubbing the polishing compound after the 2000 grit wet sanding and before applying the clear coat paint??
It won't last long after clean, I did that many times like that, maybe few months later turn back to blurry again , change the lens better if you already remove the headlights. Only cost $50-75 for the new lens and $8 glue. about 3 hours job. but last few years long.
Sheesh. If your going to remove the entire assembly, why not just separate the clear plastic piece and just replace those. A pair of new ones can be found for around $40. It is super easy to replace them. Just heat them in the oven at around 190 degrees for half an hour to soften up the sealant, separate them with a couple trim tools, and re-apply windshield sealant and new clear covers. A lot less work than this.
Really is a waste of time for an end product of mediocrity. Better off buying new after market OEM. putting a coat of plastic sealer on them and keep em clean.
You dont have to remove the bumper completely. You do have to loosen the screws and also remove the metal clamp holding the bumper to the front q panel on the inside of the side marker lights which is probably the hardest part if it all. I changed my lenses only in about 90 minutes and the lights look brand new. You can remove the whole bumper if you wish but it's not necessary. Make sure you unhook the headlight washer fluid hose if your car is equipped with headlight washers. The lights come out pretty easy.
This is what I'm about to do. As far as I understood, I need to remove the 2 top screws near the headlight, the metal clamp "inside" holding the bumper and side panel together, right? Do I have to loosen/remove the lower bumper screw near the radiator as well?
@@vladimirvladimir3143 If I remember correctly, I didn’t remove the bottom screws holding the bumper to the underside of the car. Once the top side of the bumper is released you can then get the headlight housing out to remove the old bulb retainer clips. Pay special attention to the washer fluid hose if your car has that. And also before putting the bumper back on, test your lights to make sure they don’t trigger an error code since led bulbs use much less wattage. The computer could think the bulb is not on and it could trigger a light bulb out error. I had that happen on when I changed my fog lights from halogen to led and I fixed it by installing an 8 ohm resistor
@@SuperMarioFan72 Hi Frank, thank you for you reply. I will try that - the two bottom screws would definitely save some hassle. :) I plan removing the headlight completely in order to replace the acrylic covers and whole projector assemblies reusing the xenon bulbs.
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
My OCD loves your thorough, measured manner.
EXCELLENT videos which I saved for future use. You exhibit the motto of Mercedes, "Only the Best". Your son will benefit in so many ways, your family will be safer in the already safest vehicle ever produced, and I am now a loyal follower. Thank you for such thorough videos & your high morals in giving credit to those you have viewed and used for the right way to maintain any vehicle responsibly.
Awesome video!! I just did mine yesterday without removing the bumper, but I did use a drop cloth to cover the vehicle. The results were much better than I thought they would be. Thanks a lot!!!
I applaud the Car D. Ologist for an excellent presentation. Changing bulbs on the Mercedes is a hellishly difficult job. Removing the bumper is a small price in time to make to replace any or all the bulbs.
I love your videos - even those that I don't need to work on the vehicle. :) Excellent instructions with perfect images, and great narrative. I feel like I'm watching a surgery instruction video with a doctor commentary, like a cardiologist, for example. :))
I also restored the headlights on my 06 211 but i didnt remove the bumper..just used masking tape,3m restorer kit and finally ceramic coating to protect the finish.
Easy as apple pie..no need to remove bumper
Excellent presentation and workmanship. You've given me the added confidence to do this project myself. A special thanks for your thoroughness in showing how to properly remove and install the bumper. Your effort very much appreciated.
I agree, excellent
I’ve Never heard a explanation so well articulated
well done man - my vehicle is pristine except for this problem. Thank you - I'm doing it!
Thank you > gives me the confidence and right way to take off the front bumper ☺
Unfortunately, I’ve had to access my headlights three times (once to convert to HID, twice due to aftermarket ballast failures), and this video has been invaluable. But what I would suggest rather than restoring the original lenses is replacing them. I did this with my headlights when I converted them to HID. There are eBay sellers selling a very high-quality replacement lens from China. You have to bake the headlight to remove the original lens, then seal the new one with butyl. But all in all probably less work than buffing them out, and the results are stellar. Like new.
Excellent work and great instructions. Thank You.
All you need to do is wet sand them and polish them. High speed polishing is the cure. Clear coat is a waste of money and more importantly you do not wax fresh paint or clear coat for at least one month depending on the product. If they're still foggy, its on the inside, in which case you need to heat the seal to open it and polish the inside the same way.
Very good work
Nice job- many newer vehicles need to remove the bumper, I think the newer Jeep GC requires that. I have a 96 GC and the dealer wanted 55.00 for the Mopar restoration kit and I bought new ones on ebay for under 40.00. That's crazy $$$$ for new headlights
Good idea that you replaced the bulbs while you had the opportunity
Sucks about that inferior wire sheathing, especially when someone buys a MB, you know with any good thing many times there are negatives
Thanks for taking time to document the removal of the front bumper. I need to replace a fog light and this will make things much easier.
Do you think the AMG sport package will pose any additional difficulties?
P.S. The cost for the corner following headlight assembly is $1500 per side! They also have a special coating that keeps them fading as fast but also can not be polished out.
I also recommend using dielectric grease when reinstalling the connectors. Not required, just recommended.
I guess the next video will be how to change tires. Your front tires seem to fail the Lincoln test :-) Thanks for the videos. Subscribed.
Thank you Sir, this is a very helpful video.
No sooner was I done with the brakes, new rotors front and back etc (Same car same year). etc. when one headlight failed. back up on the jackstands, off with the wheels, the flares, the bumper....might as well upgrade the lights, but: will this ever end???
looks like you have the B6 struts on the front. You know you can adjust the height by moving the snap ring down at the bottom of the spring.
very good thank you -from malaysia
Thanks, hope it's as easy as it looks. FYI - LI is "links" or left in German
What is so wrong with those dislikers mind ?? they are every where, to every video and in any action !! This video i would of consume it as a donation .... where were empty pockets have been so mean..!!
very helpful indeed
awesome job man!
Amazing difference - I'm in!
Cheaper to just replace the glass and much better results
You can buy the lenses online. When you do that, then you really have something that LOOKS LIKE NEW. I sure as hell would not be happy with what he did. They really look bad!
its still look cloudy.
you don't need to remove the bumper to remove the headlight assemblies right?
Like your methodology. Wondering why you didn’t apply rubbing the polishing compound after the 2000 grit wet sanding and before applying the clear coat paint??
Licht means Light Links means left everything else was great
Yes, correct...
And while we are at it:
Recht = law
Rechts = right
Fantastic. Thanks :D
thanks for the nice video, i was wondering if oil from intercooler pipes was normal
. apparently it is :)
i enjoyed that
thx
Nice job. How Long did take
Nice!
You surely can do that all without having your bumper off ~_~
Yeeeeeeeey ChrisFix ✌😁
I like all your videos but It seems to me that your wet sanding would completely remove all the clear coat you applied.
Was it worth all the effort? Appearance is a given, but was the time worth the $500?
Dude just open up ur hood, put duckt tape or some lighter tape around the headlights and do what you've done, no need to remove the whole thing
Considering what all he found by doing that, he did it correctly.
Could we get a year later video, please?
I have the same problem. But another problem i see is the blurred focuses on both lights. Can this also be repaired?
It won't last long after clean, I did that many times like that, maybe few months later turn back to blurry again , change the lens better if you already remove the headlights. Only cost $50-75 for the new lens and $8 glue. about 3 hours job. but last few years long.
外したパーツを投げるのが見苦しい。大切に、そして丁寧に。
Sir u r from which country, I am from Malaysia here when u bring in your benz mine is W211 model the price of repair goes u
P10 folds,
DO YOU ADD ANOTHER CLEAR COAT AFTER THE POLISH AND WAX ?
good question ! the wax is going to be gone shortly... then ugly looking lights again 😂
you can't apply clear coat after wax - it won't hold in place. the correct order is sand, polish, clear coat and then wax and buff.
Do you have any videos changing a serpentine belt or pulleys? Thanks Dr.
inside of my lights are also a little milky, need help taking the head light assembly apart.
for windshield restoration what part of your car attempt to remove? :))) sorry for my english
Or replace the lenses like I have done. Better finish.
Did it last?
I dont understand why must remove all parts of your car!
I hate ppl like u
I fck ppl like u
Hi, can you help me i have a mercedes e270 cdi 2002 and my brake lights dont work and how can i replace the bulb?
If all your brake lights don't work you will have to replace the brake switch
I believe that you can do it much more easier sir!
All that just to remove headlights? Im out.
Nah, you're lazy.
Or... Or... you can just mask around the lights.
But then you can't fix all the other things he fixed.
Why would you have to remove the bumper just to restore headlights doesn’t make sense to me IJS 😂
Hm... or you could just tape the bumper and go to town on the lights...
Sheesh. If your going to remove the entire assembly, why not just separate the clear plastic piece and just replace those. A pair of new ones can be found for around $40. It is super easy to replace them. Just heat them in the oven at around 190 degrees for half an hour to soften up the sealant, separate them with a couple trim tools, and re-apply windshield sealant and new clear covers. A lot less work than this.
same car, same problem.
Really is a waste of time for an end product of mediocrity. Better off buying new after market OEM. putting a coat of plastic sealer on them and keep em clean.
wtf.
You are doing too much Jesus Christ no thanks you can do this without removing bumper
Do what you didn't show any of the work
Just keep on talking like your an expert
You dont have to remove the bumper completely. You do have to loosen the screws and also remove the metal clamp holding the bumper to the front q panel on the inside of the side marker lights which is probably the hardest part if it all. I changed my lenses only in about 90 minutes and the lights look brand new. You can remove the whole bumper if you wish but it's not necessary. Make sure you unhook the headlight washer fluid hose if your car is equipped with headlight washers. The lights come out pretty easy.
This is what I'm about to do. As far as I understood, I need to remove the 2 top screws near the headlight, the metal clamp "inside" holding the bumper and side panel together, right? Do I have to loosen/remove the lower bumper screw near the radiator as well?
@@vladimirvladimir3143 If I remember correctly, I didn’t remove the bottom screws holding the bumper to the underside of the car. Once the top side of the bumper is released you can then get the headlight housing out to remove the old bulb retainer clips. Pay special attention to the washer fluid hose if your car has that. And also before putting the bumper back on, test your lights to make sure they don’t trigger an error code since led bulbs use much less wattage. The computer could think the bulb is not on and it could trigger a light bulb out error. I had that happen on when I changed my fog lights from halogen to led and I fixed it by installing an 8 ohm resistor
@@SuperMarioFan72 Hi Frank, thank you for you reply. I will try that - the two bottom screws would definitely save some hassle. :) I plan removing the headlight completely in order to replace the acrylic covers and whole projector assemblies reusing the xenon bulbs.