How to Install Locking Gasket

Instructions and tips on how to properly measure and select the proper Locking Gasket, as well as how to properly install to prevent glass breakage.
For more information and FREE SAMPLES visit us online at www.trimlok.com.
For a FREE CATALOG submit your request online at www.trimlok.com/catalog-700

[@Marty59143]

A part number for that last tool would be a great help. Aswould a close up of it working so a person can actually see what it's doing. Thanx for your time

[@RipRoaringGarage]

Maybe you guys can help, but for larger windows (like on a bus) do you install the rubber on the glass first, and then the entire assembly? I ask because unlike the case you have here, where the gasket slips over a thin lip of sheetmetal, the gasket on bus windows mount over a 1.5 or so wide section of wall. I understand the reason you do it for this application, but I can't see the benefit of doing it this way for a bus. Thanks

[@darksuns7384]

These things are the fucking devil. Ive been trying to install a window on a skid steer for the last 3 hours.

[@jedhatcher252]

Do you guys carry the splice connector or whatever it is called that goes over where the two ends would meet at the bottom to cover the gap and keep water and dirt out. I need one that would cover over a 5/8" strip in black and will buy right now! Someone decided to steal mine!!!

[@stylerkakhulu]

Shit🙌🏾🔥🇿🇦 I’m impressed 🤞🏾.

[@basspig]

I have to replace the glass lower panel on the door of my Komatsu PC60. The complication is I am cutting a fresh piece from plexiglass because the cab glass isn't available. Is there a formula for calculating the size of the glass vs the opening size?

[@emmanuelmungalaba3016]

How do you remove the broken glass on this rubber???

[@bahkoconcrete]

What if you do not have rounded corners? I want to redo the seals on my boat windows but they are a skewed rectangle shape with many sharp, less than 45 degree angles.

[@TrimLokInc]

Hello Bahkoconcrete. Please email your question along with some pictures, if you're able to take some, to [e-mail]. Our Sales Reps can take a look at your window and help you figure out if our Locking Gaskets will fit your application. Hope this helps. Thank you!

[@boneheaded9751]

Hey, why do you only make them fit 3/16 to 1/4 glass? What if I have 1/8 inch glass?

[@TrimLokInc]

Hi Bone Headed! We don't currently produce a locking gasket for 1/8" glass. However, custom profiles can be created if you are able to meet the minimum order quantity (usually between 10K-15K feet) for a first time order. Please call us at 888-TRIM-LOK for more information. Thank you!

[@bds]

If you're going to be cutting a new piece of glass for an opening, what size would you want to cut it to based on the size of the opening?

[@TamiyaRunner]

1/4" less on all sides just from my experience

[@bds]

@@TamiyaRunner Thank you!

[@JohnWhite-tg9wf]

or just use string no parts or extra cost

[@christianfilloux]

What offset is used between the glass and the cutout? I am installing this on my boat an cutting windows but my 1/8" total clearance (1/16" each side) is way too amall

[@TrimLokInc]

Hello Christian. Please call our Customer Service Reps at 888-874-6565. We have several different Locking Gasket options and our team is best suited to help you select one that will work best for your window. We can also provide a few sample so you can ensure the right fit before ordering. Thank you!

[@verbr632]

Shouldn't the rubber join be at the top or side of the window?

[@trim-lokinc.8236]

We recommend placing the joint at the bottom, both for functionality and aesthetics.

[@markhansingh767]

Spry mein kya hota hai kis chij ki spry Hoti Hai yah kaun sa chemical Hota Hai spry Mein

[@sunmakergg]

thanks nig