Surely you can only wipe the original key when connected to the assigned car. If it has been wiped then it should reprogramme to any suitable car as it is essentially a new key. These things are pretty cheap and it isn't worth buying a used one. Mine for instance was only £11 on Amazon complete with chip.
Hi, yes if its been made into a virgin key again it should code up. However, most of the ebay keys im asked to code in have been made into a virgin key. You're correct that the new copy keys can be very cheap so a new key can be quite reasonable
Hi Craig, was it new? There are some really cheap brand new ones for about £10 and they programme up ok. The problem comes when we've tried to programme a used key that's had a fresh key blade. If we've had a customer that has a brought us in a used key, we've never got it to code up
When I tried to do mine the display said service theft deterrent system . The coding machine goes through the whole sequence and then says no loaded key repeat procedure. Are the two events connected?
As far I have seen, it's not possible to programme a used Vauxhall key, the car just does not accept the new key and will display the mesage you are talking about
I bought one off eBay it says unlocked when read and goes through the programming modes in the ignition etc but then says failed at the end. Using Autel 508. Not confident in the key now following this yet there are many comments saying otherwise. What do you do? Buy more rubbish? Or buy the version I was hoping you would suggest / promote the link to..? Maybe main dealer only then?
I bought one for opel astra g from aliexpress but guy couldn't cut the key properly and it can't fit into lock properly any ideas if this still can be cutted?
Nonsense, it's a bit faffy but simply swap over the insides. Make sure you work on clean visible surface for tiny bits. Refit the key and chip, plus battery and works brill
Hi Steve, thanks for watching the video. It's about whether previously programme Vauxhall keys can be coded into another car. Have you managed to do this? Can you explain a bit more about what you kit you use to do it? It would really help anyone who watches the video in the future. Thanks
It's difficult to help you without seeing the key. If you have swapped it over to a new case, but now no buttons work, it may be the battery is wrong way round, or the metal connector is not touching correctly
I GOT A KEY FROM EBAY AND REMOVED THE PART HE MILLED YOU DO NOT NEED TO CUT THIS THE ORIGINAL KEY IS HELD IN WITH A LITTLE ROLL PIN YOU SIMPLY DRIVE IT OUT FROM BOTH KEY FOBS AND SWOP THEM OVER AN AT THE SMAE TIME SWOP THE PRINTED CIRCUITS JOB DONE. YOU NOW HAVE A NEW KEY FOB WITH THE ORIGINAL PROGRAMED CIRCUIT BOARD AND METAL KEY. I DONE IT IN THE HOUSE NO PROBLEM
Hi, yes the cases can be really good value. The problem comes when the key has electronics that have been coded to another car previously. Hope that helps and thanks for watching
Hiya. Easy, just use a key tool maxpro, very easy to program. The key fob, the best quality will cost You 9 pounds, brand new let's say virgin. All the best
Surely you can only wipe the original key when connected to the assigned car. If it has been wiped then it should reprogramme to any suitable car as it is essentially a new key. These things are pretty cheap and it isn't worth buying a used one. Mine for instance was only £11 on Amazon complete with chip.
Hi, yes if its been made into a virgin key again it should code up. However, most of the ebay keys im asked to code in have been made into a virgin key. You're correct that the new copy keys can be very cheap so a new key can be quite reasonable
I bought one off ebay 4 my insignia got it cut and programmed works fine
Hi Craig, was it new? There are some really cheap brand new ones for about £10 and they programme up ok. The problem comes when we've tried to programme a used key that's had a fresh key blade. If we've had a customer that has a brought us in a used key, we've never got it to code up
@@TheCarKeyMan hi pal yes it was a 10quid e bay special and it still working fine i was not having a pop at you 👍
Not a complete waste of money. The cases on these keys are prone to breaking so at the very least it’s a backup for if you need to replace the case.
Hi, the trouble is that to get the case open, it needs to be broken open, which means you can't re-use it.
When I tried to do mine the display said service theft deterrent system . The coding machine goes through the whole sequence and then says no loaded key repeat procedure. Are the two events connected?
As far I have seen, it's not possible to programme a used Vauxhall key, the car just does not accept the new key and will display the mesage you are talking about
That's what I thought, but this was a new key from ebay, hadn't been programmed to another car, just wouldn't have it.
I bought one off eBay it says unlocked when read and goes through the programming modes in the ignition etc but then says failed at the end. Using Autel 508. Not confident in the key now following this yet there are many comments saying otherwise. What do you do? Buy more rubbish? Or buy the version I was hoping you would suggest / promote the link to..? Maybe main dealer only then?
If you get a new key and have the pin code, most machines wll programme it.
Hi. What about if you change the chip? Or put one more inside brand new, will it work? Thanks
Hi, it needs a brand new key
I had a faulty spring and took my key apart and now the buttons do not work everything is back where it came from any ideas? thanks
Hi, that's a bit odd. If you put the circuit board back into the old case, do the buttons work?
I bought one for opel astra g from aliexpress but guy couldn't cut the key properly and it can't fit into lock properly any ideas if this still can be cutted?
Hi, well it depends how badly he has cut it.
@@TheCarKeyMan I can see extra metal on key, it needs to be cutted more a little bit
Nonsense, it's a bit faffy but simply swap over the insides. Make sure you work on clean visible surface for tiny bits. Refit the key and chip, plus battery and works brill
Hi Steve, thanks for watching the video. It's about whether previously programme Vauxhall keys can be coded into another car. Have you managed to do this? Can you explain a bit more about what you kit you use to do it? It would really help anyone who watches the video in the future. Thanks
What if inside is broken like mine
Am just replaced my key, and am now unable to unlock my car, back door and lock is working but unlock not! Any kind of help?
Hello, did the buttons work before?
@@TheCarKeyMan yeah button has been destroyed and am been able to push button inside hole with another key
Do either of the buttons work?
Yeah, Astra is 2013 year key is just like in your arms with 3 buttons
It's difficult to help you without seeing the key. If you have swapped it over to a new case, but now no buttons work, it may be the battery is wrong way round, or the metal connector is not touching correctly
I GOT A KEY FROM EBAY AND REMOVED THE PART HE MILLED YOU DO NOT NEED TO CUT THIS THE ORIGINAL KEY IS HELD IN WITH A LITTLE ROLL PIN YOU SIMPLY DRIVE IT OUT FROM BOTH KEY FOBS AND SWOP THEM OVER AN AT THE SMAE TIME SWOP THE PRINTED CIRCUITS JOB DONE. YOU NOW HAVE A NEW KEY FOB WITH THE ORIGINAL PROGRAMED CIRCUIT BOARD AND METAL KEY. I DONE IT IN THE HOUSE NO PROBLEM
Thanks Kenneth :)
Some keys can be reset and virginised other can’t sums up the video in a sentence.
Your wrong you buy it for case buttons i paid £4.99 and done the job
Hi, yes the cases can be really good value. The problem comes when the key has electronics that have been coded to another car previously. Hope that helps and thanks for watching
It is blocked, will not work
Yes, it didn't say that in the eBay advert description....
Hiya. Easy, just use a key tool maxpro, very easy to program.
The key fob, the best quality will cost You 9 pounds, brand new let's say virgin.
All the best