No More Ply prior to tiling a Kitchen - Part 2 - Laying the boards

This is my DIY project to lay tiles in my kitchen. I am using a tile backer board called "No More Ply" which is a cement based board. A 6mm board apparently has the same equivalent thickness as a 12mm sheet of Plywood, which means you can get the same strength as you can with Ply with more ease and less height than you would with laying ply.
No More Ply's official website: www.nomoreply.net/
This video covers the laying of the first few boards
No More Ply prior to tiling a Kitchen
Part 1 - Intro, Plan and First Cut - • No More Ply prior to t...
Part 2 - Laying the boards - • No More Ply prior to t...
Part 3 - Radiator pipe cut and board laying - • No More Ply prior to t...
Part 4 - Main boards laying - • No More Ply prior to t...
Part 5 - Last few cuts - • No More Ply prior to t...
Part 6 - Final Thoughts and End Result - • No More Ply prior to t...

[@glynnhancock9546]

If you ping a chalk line down the centre of the room, that will help you get the first row of boards lined up, as rooms are never square.

[@linara8643]

Can you use another type of glue?

[@JohnSmith-nz9kv]

When screwing down was the screws flush with the cement board mine are sticking out so not flush

[@tortoisebore8642]

You on a hourly rate..... 😴