Inlaying Cracks ( The Cheap Way ) -
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- I take a fairly cracked up bowl blank and show you how to rescue it with a little POP! Glitter and Starbond CA.
Thanks for watching! Please consider subscribing for more project ideas, tips, tricks and how to videos!
Affiliate Links:
Turning Tools
Crown 278A 1/2-Inch Combination Left & Right Captive Ring Tool: amzn.to/3VrKRdP
PSI Lathe Woodturning 4pc Bead Cutting HSS Chisel Set: amzn.to/3Ve8KEr
RON BROWN'S TEXTURIZING TOOL - 1/4 x 12 TPI: amzn.to/45aABtC
Nova Pro-Tek G3 Chuck Kit with 3 jaw sets: amzn.to/3wTWDUZ
Hurricane HTC125, 5" Four Jaw Chuck, 1 1/4"x 8 TPI: amzn.to/459STLI
5.9 Inch Cast Iron Lathe Tool Rest: amzn.to/4aULa5b
Robust, Comfort Tool Rest 15" Wide, Standard Post: amzn.to/4e62t6j
Hurricane / Crown M42 Cryo, 1/2" Bowl Gouge (3/8" Flute): amzn.to/3yMeeyx
Hurricane / Crown M42 Cryo, 5/8" Bowl Gouge (1/2" Flute): amzn.to/4aNRxHF
Hurricane/ Crown M2 HSS, 3/4" Spindle Gouge: amzn.to/3KruEPA
Hurricane / Crown M2 HSS, 1" Bowl Gouge (3/4" Flute): amzn.to/3wUlAzF
Hurricane High Speed Steel, 1 1/2" Round Nose Scraper: amzn.to/3Ku3OWP
1/2" Bowl Gouge M2 HSS (pointy one): amzn.to/3yKqxvj
Crown 237K CRYO Cryogenic 1/2-Inch Spindle Gouge: amzn.to/3yM8vZz
Hurricane / Crown , M2 Cryo, 1" Square End Scraper: amzn.to/3VvimLh
Round End Inboard Side Scraper: amzn.to/3VcVC27
Lathe Live Center Set, 4pcs Drive: amzn.to/45e9zBS
Pen Turning Tools I use:
Milescraft 4701 Pen Press: amzn.to/3VdICJA
Pen Mandrel Bundle with Mandrel Saver: amzn.to/4c6gor5
Supplies I use:
100% Carnauba Wax Bar - 3.1" x 1.8" x 1.2": amzn.to/3X9LeuX
Buffing Wheel for Drill: amzn.to/3VuO6Ry
Polishing Compound Kit: amzn.to/3RgxvhX
Buffing Polishing Wheel 3-Step: amzn.to/4c3FhDS
Wood Moisture Meter: amzn.to/45dNcw9
Tools
WEN Mobile Base MB500 amzn.to/4eg1ksZ
JET 16-Inch Drum Sander JWDS-1632 amzn.to/4b3cwpU
Wolverine Grinding System w/ VARI-GRIND jig and Setup Blocks: amzn.to/4aRAch5
Offset Ratchet Screwdriver amzn.to/4eiZlUL
CBN Grinding Wheel 180 Grit, 8" Dia x 1.5" amzn.to/4bX670Z
Great idea! I might have to try this as well.
Thank you!
Good timing Tony. I have several blanks in a similar condition l. 👏
I know the video is a little longer that most folks have time for, but I thought this one tip was worth doing a full turn video on. I really appreciate the support, and I hope this trick works for you!
When I watch wood turning videos I'm not watching to hear music. I want to hear the teacher. Ain't that right Super Man Tomislav
I appreciate that feedback for sure!
Auch ich habe lange Zeit versucht, mit Konrastfarben die Risse zu füllen. Bei Esche zum Beispiel mit dunkelblau. Inzwischen bin ich aber etwas davon abgekommen und arbeite jetzt gern mit Hartwachs. Das gibt es in vielen Farben und mit einem Lötkolben lässt es sich gut einfügen in die Risse und danach gut schleifen. Ist aber viel Arbeit, weil ueberstehendes Material vor dem Schleifen mit Rasiermesser entfernt werden sollte, damit sich das Schleifpapier nicht gleich zusetzt.
Great Tip! I will have to try that!