Toyota Camry Cylinder 1 to 4 MisFire, fix it yourself P0301 P0203 P0303 P0304 (DIY) Guide
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of RB The Mechanic.
#misfire #camrymisfire #toyotacamrymisfire #toyotamisfire #randommisfire #2012camrymisfire #2013camrymisfire #2014camrymisfire #toyotacamrymisfire #p0301 #p0302 #p0303 #p0304 #cylinder1misfire #cylinder2misfire #cylinder3misfire #cylinder4misfire
Fixed my misfire because of you. Thank you; you're a blessing.
Welcome!! Good job doing it urself!!
You're the man. Just fixed. Bad coil from the auto parts store. Didn't realize till watched your video. Boom!
Good job!! Quick fix
Hey man i really appreciate your video Im gonna tell you guys my experience: I had this code and i got so frustrated after spending a lot of money replacing spark plugs, ignition coils, engine gasket, cables, clean MAF sensor. Anyway I was about to get me another car but I tried the last chance. My whole problem was my alternator due to dont sent enough charger to the battery
Ohh ok could be low power but why didn’t it give u the battery light
Last time I had to do it this way. I let the engine idle while unplugging one ignition at a a time. The one that didn't make a difference was the bad cylinder. The second time one failed (months later) Fortunately my ODB2 reader identified the cylinder. I realized they were all reaching end of life. I went and bought the best lifetime set of four and replaced them all, threw away the bad one keeping the working three for emergency spares. (I have a lifetime warranty now)
Yuppp
Thanks bc these repair companies are charging ungodly prices and not completing work issues.
Have a 2007 Toyota Camry Le shows code p0171 running to lean in bank 1, also notice gas on spark plug 1. Car will start up and run get to destination then will have to wait about 20 minutes before I am able to start car again. Have changed cracked radiator, O2 sensor 1, thermostat, spark plugs. Where do I need to go from here
U might have two different issues it might be over heating and waiting for it to cool down
Thank you very much!
Welcome
Yo lo aplique y si funciona muchas gracias mis respeto
Idk Spanish bro but thank u for gracias!!! Some words I know
thank you so much you are the best man ,
Welcome!!
I got a reading and the code it showed was p02F1. It says Cylinder 4 injector circuit range/performance for the primary trouble codes. It’s on a 2020 Camry se
Test the injector or swap it
Thank you so much for this video you just saved me so much in shop time. Your awsome
Glad video helped you!!
I heard not to disconnect those while vehucle is runing
This is how I test or u can go with scan tool get live data
Thank you
Welcome
What will cause the car to back fire
Timing off leaking injectors could be lot of things
Will bad ignition coil cause my camry not to crank?
Nope it will still crank
I have a 2013 camery se i had a misfire and got a tune up but my engine misfired again a few days after. Any advise on whats wrong?
Scan the car for codes and replace the coil for that cylinder also check to see if there an oil inside that bore of the plug
Will do thank you
My camry is dieing while idling and running like crap. It doesnt want to accelerate or go uphill. The check engine light flashes sometimes when im driving. I changed the plugs and still dieing when i let off the gas. Please help. Thank you.
U might have multiple issues scan the car for codes that’s step 1
Mine started after I changed my ignition coils, does that mean they're all bad?
Could could had gone bad
2001 Camry purrs like a kitten until it heats up then misfires po-302. changed spark plugs, swapped coils, changes plug wires, replaced fuel filter, tested VSV sensor, replaced intake manifold gasket. Could it be a bad exhaust valve?
Did u check for vaccum leaks? We’ll swap the coil and plug on that cylinder also check compresson possability could be injector or engine cimoresson
Is this the same procedure for camry 2002 as well?
Yup same thing
Does this work for camry 2018? I speak Spanish
Yes
DO YOU RECOMMEND CHANGING ALL FOUR AT THE SAME TIME?
No if u rich and got that money then go for it but usully I do as they fail change spark plugs tho coil only as they fail
Im dealing with the same problem with my 2002 toyota camry it gave me a p0300 code my car was misfiring when i hit the gas it was a vibration soon as i put it in drive it cut off So is that my coils and spark plugs?
P0300 is random misfire it could be making vaccum or oil in plugs or other things start with checking all coils for oil inside the bore of plugs
My car is doing this too and it does have oil inside coils..what else can it be... @RBTheMechanic
@@lupeteran6630 it dose or dosent?
Is a P0300 cylinder 0?
Lol good one anyways that’s random multiple cylinders
Hey is it always coil / plug or can it be worse? P301 p304
Well u never know it could be other things such as engine compressor low valves injectors ECM. But u want to think of the basic first coil and plugs
I have a 2014 Toyota camary xle. Went I go like 40mp and I tried to go faster like 40 and 50 stars like bie bring some body nowhere what can’t be?
Didn’t understand what u said
@@RBTheMechanic sorry I have a 2014 Toyota Camry XLE. When I’m driving and get to like 40mph- 50mph it occasionally seems like it’s vibrating like it’s skipping out. It doesn’t do it all the time. Nothing is showing up on the dashboard as an indication. I changed the spark plugs about 6/8 months ago. I don’t drive a whole lot. But I drive it daily to and from work. Do you have any idea what maybe happening?
@@noegallegos3526
When the car is vibrating, do u feel the car losing power. When u push the gas all the way in?
Coz I was having this problem on my vw passat & when I was pushing the gas all the way in, the car lost power & was starting to vibrating
I changed all spark plugs & coils packs
& problem was solved
Hopefully this can help you
Coz for what you saying, I think can be the same problem.
Hello expert please I have misfire Toyota camry 2009 p0300 that mean 1/3 witch one is bad and need to replacement please? Thank you
That’s random misfire check ur oil possibility the random can be caused by old or low oil with wount allow vvti to work propperly
@@RBTheMechanic thank you very much for responding me
@@RBTheMechanic I have another question please, oxygen sensor upstream I already bought one from 1a auto and installed but the light still shown up in dashboard although I drive more than 25 miles for wait the reset the light but won’t gone why? Thank you
@@Ali_atikrity no problem!!
@@RBTheMechanic thank you dear
Do you reply bro? I have a 09 matrix that threw codes 1 night and started misfiring. It was po301 and p0304. I changed spark plugs in both cylinders and replaced all ignition coil now car wont start. Any advice?
Replace the coil to denso brand and check ur plugs gap
You said if it shakes after unplugging the cylinder is bad? Or the coil? If cylinder. Is that fixable
Because my 02 camry has been blowing white smoke out the exhaust and shaking. Read 04 cylinder is bad
No if it dosent make diffrence in shake then it’s bad and replacing the coil is step one coil and plugs
What tool would I need to remove the bolts from the coil? And to remove that top piece?
10mm socket and ratchet
@@RBTheMechanic thank you for responding also last question what tools do I need to remove the spark plugs & to put the new ones in?
@@SincerelyChiss I think the socket is 14mm I think so with long extension and ratchet 3/8 size
@@SincerelyChiss I have other videos on Camry spark plug
@@SincerelyChiss here’s a more detailed videoth-cam.com/video/fHfOB96jbZM/w-d-xo.html
I got the code p0303 and changed my spark plugs and coils. But its still got the p0303 code
Check if ur coil has Paula’s and if it go spark other wise need to go further check compresson and jnjector
@@RBTheMechanic what's Paula's?
what spark plugs are you using????
I use denso brand
I did this and its not the spark or the coil
Check engine compresson
I've got an 03 Camry 4 cylinder that just started misfiring when I took it out today. I started it up, warmed it up to normal idle because it's 35⁰ outside and drove it for 15 minutes when it started misfiring or running rough. I drove it back home and hooked up the odb2 reader and it said P0303 cylinder 3 misfire. Do you think it would be wise to replace the plug wires too after diagnosing the coil like you did and replacing the coil if needed. The plugs have to be old, so I was going to replace them with iridium plugs.
Replace the spark plugs and replace the ignition coil for that number 3 cylinder it dosent have wires that’s all u need to do plugs change all 4 cylinder plugs and coil only for cylinder 3 and those iridium are some goood plugs!!
@@RBTheMechanic I followed the steps you outlined, swapped 3 and 4. It was the #3 that was bad so I ordered a new coil. I pulled the spark plug and they already were iridium plugs in there. I checked the gap and they were good and will leave the old plugs in there unless they act up. Thanks for your video and help and advice. I really appreciate it.
@@jonnyboat2 oh cool u did good!!!
Lucky yours was just a coil, I did all my plugs, coils, coil harness and nothing worked so I brought it into a shop and they said it's a head gasket leak but apparently it's only misfiring the first 5 minutes after cold start cuz apparently the coolant is burned away after that and it runs fine. Just gonna drive mine til it dies
@@BluLemon oh darnnn that’s no good but head gasket would caused over heating and crazy stuff did they check compresson also injectors need to be tested
I have 2018 camary put obd scanner shows p0303 cylinder 3 mis fire but my car telling me secondary collision break system malfunction and pre collision system malfunction is that normal for that code also have like 3 lights on including check engine?
Replace that coil and reset the light then keep fingers crossed the light done come on
i have a 2018 toyota camry LE that shows misfiring all of a sudden all my lights came on it was read p11EF P0304x3 and p11EA just showed up. i routine maintenance my car and it also shows the pre collision system malfunction i changed the coil on cylinder 4 and changed the spark plugs switched out the oil just bought another coil hoping that is another bad coil. any ideas or think you can point me in the direction to something? diagnosis att a dealership is tearing me up, hoping it’s something minor and just misfiring
I changed the coil I changed the spark plugs did not fix the problem what would be the next step
What is ur code
I got p0303 code on rav4 2010 and I have change spark plugs and put new coils still the engine light came back on. Also the car jerk when I accelerate sometimes could this due to faulty fuel injector that might be causing misfire on cylinder3?
I would swap the coils around to see if misfire switches to diff cylinder. I just had car today I put in coil and it still misfired. Bran new coil was defective
@@RBTheMechanic yea I have change the coil around and still gave me the same code p0303 cylinder 3 misfire