Kickstarting My 3D Printing Adventure!

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ธ.ค. 2024

ความคิดเห็น • 40

  • @moniquethorn939
    @moniquethorn939 วันที่ผ่านมา

    I’m just starting off as well, excited to see your journey

  • @urbanfarmacademy
    @urbanfarmacademy 11 วันที่ผ่านมา +1

    I am just starting out in 3d printing. I will be integrating with my urban farming business. I just got the ai combo, thinking of getting the p1s and x1c too. I haven't started at all , but I am optimistic. Thank you for sharing your journey

  • @demekosparks2460
    @demekosparks2460 12 วันที่ผ่านมา +4

    You and I are in the same boat, brother. In the past four months, I’ve purchased two P1PS and an AI. I continue to work my job. Great stuff like to see more of your content.😊

    • @williamsworkshop717
      @williamsworkshop717  11 วันที่ผ่านมา

      @@demekosparks2460 appreciate you! 🙏🏾

  • @SynchronisedMinds
    @SynchronisedMinds 3 วันที่ผ่านมา

    Having used the PS1 for a year now i have swapped over top the A1 printers. What i didnt realise is that printing PLA you need to keep the door and lid off. If you dont you will get heat creep . I am on my 4th hot end and replaced the gear system so got mad enough and put it back in the box and using axclusively the A1 printers. Good luck.

  • @Antsmith21
    @Antsmith21 12 วันที่ผ่านมา +3

    New Sub! I am so happy to have found your channel. I am in the similar business state. I'm looking forward to following your journey.

  • @juniorpinheli5590
    @juniorpinheli5590 10 วันที่ผ่านมา +1

    Congrats man...
    I will whatch you here Brazil 🇧🇷

  • @geekanoids
    @geekanoids 11 วันที่ผ่านมา +4

    Awesome video. Best wishes for your 3D printing business. That desk holder looks awesome, do you have a link to it?

  • @TheDwilliams1000
    @TheDwilliams1000 3 วันที่ผ่านมา

    Hey bro. My last bame is Williams too. Keep it up bro. I do both Laser stuff and 3d prints. Just not sure about getting on TH-cam to talk about it.

  • @AnonymousKev
    @AnonymousKev 19 ชั่วโมงที่ผ่านมา

    looks great!!

  • @kayviah
    @kayviah 8 วันที่ผ่านมา

    Found your channel via your first sale video, im also attempting to start a 3d printing type business. Heres to success!

  • @DWalkin08
    @DWalkin08 4 วันที่ผ่านมา

    Glad to subscribe and best of luck! I’m in a very similar place myself. Already have a laser engraver, and am hoping to upgrade my 3D printer to a P1S from the Ender 3 v2 I’m currently rolling with. Plan is to have a laser engraving/woodworking/3D printing business. Might start a channel to go with it myself! Look forward to following your journey man.

  • @Samcraftcom
    @Samcraftcom 5 วันที่ผ่านมา

    This video popped up in my feed and I'm glad I clicked on it! I look forward to following along with you and your business journey!

    • @williamsworkshop717
      @williamsworkshop717  4 วันที่ผ่านมา

      @@Samcraftcom not gonna lie Sam I’ve been following your videos for like two years so to see this comment is amazing. I appreciate you!

  • @floatypiet
    @floatypiet 10 วันที่ผ่านมา +1

    Cool! Excited for the upcoming videos about your business!

  • @ReMiKu_cgn
    @ReMiKu_cgn 3 วันที่ผ่านมา

    Great Video....looking forward for the next ones. Btw...do you have the stl or the location of the file for your iphone desktop holder/charger. I found a similar one on printables but i prefer the design of yours. I would really appreciate a hint where to find it.
    Good Luck with you shop....i will join you on the journey and keep an eye on your vids.

  • @dalerbsr.5061
    @dalerbsr.5061 6 วันที่ผ่านมา

    Awesome video, look forward to additional info... Thanks

  • @guitardude32787
    @guitardude32787 11 วันที่ผ่านมา

    Here in the same boat paddling along side ya brother. Just got out p1s and ams loader. Going down the same road and trying pump some money out this thing. Extremely excited, we’re printing a multicolor dragon or something along that, sending it with the kid on Monday at school and hopefully a list of friends that want one 😂

  • @koolzfr
    @koolzfr วันที่ผ่านมา

    What would the stl be for the 3:44 christmas tree?

  • @dr.earnest.ujaama
    @dr.earnest.ujaama 2 วันที่ผ่านมา

    I am now a subscriber. Get those videos loaded up, bruh. Get your website up also. Appreciate you.

    • @williamsworkshop717
      @williamsworkshop717  2 วันที่ผ่านมา

      @@dr.earnest.ujaama appreciate you 🙏🏾

  • @TokyoNeko8
    @TokyoNeko8 7 วันที่ผ่านมา

    Make sure you do proper accounting. True cost including filament, power and SHIPPING (boxes etc, padding, etc)

  • @zac-f27
    @zac-f27 11 วันที่ผ่านมา +1

    I am your 800th subscriber!

    • @williamsworkshop717
      @williamsworkshop717  11 วันที่ผ่านมา +1

      @@zac-f27 thank you !!! 🙏🏾

    • @zac-f27
      @zac-f27 11 วันที่ผ่านมา +1

      @ I just upgraded and from older ender 3 printers to Bambu lab. In the same boat as you, trying to build a little business!

  • @IVNDRR
    @IVNDRR 12 วันที่ผ่านมา

    Good luck on your journey!

  • @ericew
    @ericew 12 วันที่ผ่านมา +26

    "Fusion 365" .. don't give Microsoft any ideas.

    • @Master-ip7py
      @Master-ip7py 12 วันที่ผ่านมา +2

      😂

    • @urbanfarmacademy
      @urbanfarmacademy 11 วันที่ผ่านมา

      I think he meant to say fusion 360

    • @zelan756
      @zelan756 10 วันที่ผ่านมา +1

      ​@@urbanfarmacademyNope, that's the difficult one, he mentioned the "fusion 365" relaitevely easy to learn one. I've been looking for it everywhere cause there's nothing easy about the damn 360 one.

    • @ericew
      @ericew 10 วันที่ผ่านมา

      @@zelan756 I'll take Fusion 360 every day of the week and twice on Sunday over Blender. They might as well be talking another language.

    • @urbanfarmacademy
      @urbanfarmacademy 10 วันที่ผ่านมา

      @@zelan756 😆😆😆 now I get the gist

  • @Void_xplorer
    @Void_xplorer 11 วันที่ผ่านมา

    howe many sales have you has so far?
    And how did you build your channel?

  • @savantguyd899
    @savantguyd899 13 วันที่ผ่านมา +1

    Do you design all of your prints?

    • @dustmicks1
      @dustmicks1 12 วันที่ผ่านมา +4

      it looks like he got those from maker world

  • @garyarias-f2f
    @garyarias-f2f 11 วันที่ผ่านมา

    nice

  • @stealtheo
    @stealtheo 4 วันที่ผ่านมา

    Just a heads up, if you want to sell files you downloaded from the internet, you’ll need to get a license from the designer.