Awesome video, my wife and I have a white 2016 and been hesitant on getting it because we heard of all the wiring involved but now that they have revised it and it is now plug and play, I will definitely be getting a set
They will sit perfectly flush if file out the bolt holes just a tiny bit so the gaskets seat better. They are a slightly larger diameter than the stock taillight bolts.
Hi. I have a 2013 Fusion Titanium. I am considering buying the tail lights but I am unsure because of FORSCAN issue you mentioned. Will there be a vid coming up on how to deal with it?
Doug Tunnels hello yes I’m currently working on a review on these. But for time sake I would say go ahead and get them if you like. Great lights and very very very few cons which I will go over and I’ll explain I the video why you might not want to do the forscan change
Hey man did the long part of the tail light come with it’s own custom rubber grommet because I noticed that it doesn’t fit with the oem I had to put a bunch of pressure for them to pop in and it still looks out of place it has a little gap
Hey man, I have a 2013 fusion se. Just wanted to confirm if this was a simple plug and play? I’ve read on some forums where people where having issues with the turn signal not working when the car is running.
Yes it’s plug and play. Everything works now since they have fixed the issue where the turn signals would not work for the us spec. It was messing a capacitor in the first few production models, but now they have implemented it. All you need is forscan to change it from your se spec to mondeo and this will ensure that the orange turn signal is lit and not that plus the four led lines
@@davidvickram5778 Please help. I installed the lights and the sequential lights wouldn't work on my 2016 Fusion SE. I then got FORSCAN and tried programming the Mondeo tail lights, but that didn't work either. I even programmed the Titanium too, but that didn't work. No flashing/sequential lights, it basically works like a normal turn signal. I'm stuck. Any help would be appreciate. Thanks.
hello from chicago David, your car looks cool with these tail, just l wanted to know if this light fit in my vehicle 2014 ford fusion titanium? l am in your channel.,
Hey appreciate it and yes it will fit. It plug and play. I have a review coming up where I talking about programming them to work as they are advertised etc.
You need a software called forscan and the coding for a mondeo. It’s not necessary though to have them program. All the programming does is make the sequential turn signal the only one lit when indicated. Out of the box the four quadrants and the sequential strip blinks at the same time
You would have to check your wiring and see maybe there’s something not done correctly or it might be a defective product. I’ve had no issues like that
I just ran across this video while doing research on Fusions. I have to believe those lights are pretty much illegal in most jurisdictions with the red strobe effect.
The way the leds appear in camera makes it looks that way. But it function like any other modern day led taillights. Take a camera and take a video of some led, they will strobe and flicker
Hey man best advise I can give you is if your on a budget, go with the ones that are already made, you might score out on them and when they do start going bad, get someone to retrofit them with better quality hardware. I recently upgrade mines and so far they work a hundred times better than stock which is most often the case with any headlight. Video coming soon
Awesome video, my wife and I have a white 2016 and been hesitant on getting it because we heard of all the wiring involved but now that they have revised it and it is now plug and play, I will definitely be getting a set
Yes definitely worth it if you want to update the exterior of the car
Did you end up getting it?
I have a 2019. Got the lights and am in love with them. Had to switch out the trunk trim with 2013-16 but thats really it
Yes apparently now they offer a taillight upgrade for the new fusions but I recently swapped over to the titanium style taillights.
Was ot hard to do that swap? I’m thinking of doing the same on my 2019 fusion
@@danielgreenberg4751 not really. But you need something to secure the trim behind it, because it is a slightly evolved body style
Could you possibly do a video on that?
@@davidvickram5778 where is this trim offered
They will sit perfectly flush if file out the bolt holes just a tiny bit so the gaskets seat better. They are a slightly larger diameter than the stock taillight bolts.
Hi David, nice video Bro.... can you provide an updated link for the taillights???
Do you know if this would fit a 2017?
Hi. I have a 2013 Fusion Titanium. I am considering buying the tail lights but I am unsure because of FORSCAN issue you mentioned. Will there be a vid coming up on how to deal with it?
Doug Tunnels hello yes I’m currently working on a review on these. But for time sake I would say go ahead and get them if you like. Great lights and very very very few cons which I will go over and I’ll explain I the video why you might not want to do the forscan change
I've got a 2016 Deep Impact Blue Titanium. Love to get these! Link to place you got them?
I got them from AliExpress when they first came out but now you can find them on Amazon and eBay. Just look up Ford Fusion led taillights
Hey any suggestions on how to make it fit better I'm having issues with that????
just mess around with the bolt. i got it pretty good after a bit of messing around
Hey man did the long part of the tail light come with it’s own custom rubber grommet because I noticed that it doesn’t fit with the oem I had to put a bunch of pressure for them to pop in and it still looks out of place it has a little gap
Hey I'm having the same problem, any suggestions on what I can do
Hey man the lights look dope, how much were they and where can I grab them... thanks
aliexpress, ebay, amazon. they are around mid 300s now
What is there to program? On my lights, the turn signal and brake lights flash at the same time. Thanks
Thanks for the video. Very cool tail lights. Do you know if they fit a Ford mondeo/fusion 2013 Station Wagon? 🤞
nein die passen leider nicht an den Turnier... sonst hätte wohl die halbe Nation schon welche :)
Hey man, I have a 2013 fusion se. Just wanted to confirm if this was a simple plug and play? I’ve read on some forums where people where having issues with the turn signal not working when the car is running.
Yes it’s plug and play. Everything works now since they have fixed the issue where the turn signals would not work for the us spec. It was messing a capacitor in the first few production models, but now they have implemented it. All you need is forscan to change it from your se spec to mondeo and this will ensure that the orange turn signal is lit and not that plus the four led lines
I have a review that I will post soon which I will go these over and show a demonstration.
I appreciate man! Still looks really nice even without the programming
Appreciate it. Looking to get the carbon fiber steering wheel from sstuning in the future tho
@@davidvickram5778 Please help. I installed the lights and the sequential lights wouldn't work on my 2016 Fusion SE. I then got FORSCAN and tried programming the Mondeo tail lights, but that didn't work either. I even programmed the Titanium too, but that didn't work. No flashing/sequential lights, it basically works like a normal turn signal. I'm stuck. Any help would be appreciate. Thanks.
They must of sent me an older model. My sequential indicator doesn't work and I don't know how to do that forscan stuff
You would need a resistor if yours didn’t come with it for the lights to truly work and the forscan in my opinion is optional and also very easy to do
@@davidvickram5778 Do I need the resistor if I just decide to use forscan?
@@iguardwisconsinberry8830 you’d still need a resistor
@@aprentiss9833 okay cool, the resistor I need is the 1000UF 20 something volt?
@@iguardwisconsinberry8830 th-cam.com/video/E79xXo3UE1c/w-d-xo.html
Where can i get a pair of these?
hello from chicago David, your car looks cool with these tail, just l wanted to know if this light fit in my vehicle 2014 ford fusion titanium? l am in your channel.,
Hey appreciate it and yes it will fit. It plug and play. I have a review coming up where I talking about programming them to work as they are advertised etc.
Hi David, then you mean that I have to programming somethings., if yes, how can I do that programming thanks.,
You need a software called forscan and the coding for a mondeo. It’s not necessary though to have them program. All the programming does is make the sequential turn signal the only one lit when indicated. Out of the box the four quadrants and the sequential strip blinks at the same time
Will this fit 2019
Are you using forscan to program the lights?
not at the moment but will in the future
nice vid
When buying from Ali express did you have pay more for import costs or any customs fees? Just curious.
Yes shipping cost were included.
Do u think this light will fit my 2017 i want does light but i dont see for my fusion
update?
Thank you
When I turn on my headlights, the turn signals are on, is there a solution?
You would have to check your wiring and see maybe there’s something not done correctly or it might be a defective product. I’ve had no issues like that
Do they make these for 2019 ford fusion?
unfortunately no but theres been conversions done before to the trunk to make them fit but very costly
Where do find these??
Does is fit in european mondeo Sedan? I mean the electric, did you know that? Greets from Berlin
If your car has the same shaped taillight then yes. I know some mondeo have bigger taillights and it also depends on the year
Man y’all 13/16 fusion owners are so blessed with those mods 17+ fusion owners can’t get en it’s unfair lol 😂
I just ran across this video while doing research on Fusions. I have to believe those lights are pretty much illegal in most jurisdictions with the red strobe effect.
The way the leds appear in camera makes it looks that way. But it function like any other modern day led taillights. Take a camera and take a video of some led, they will strobe and flicker
@@davidvickram5778 Gotcha. Nice car btw. Hope to get a Platinum by next winter. Best looking car in recent years.
Awesome
Keep it up
When you do the forscanning are you gonna make a video on how you program it
Yeah that would be good
Always leary about mondeo products for fusion, never 100% sure it will fit
Anyone know if these would fit my 2019?
Unfortunately no 17+ is a different gen from 13/16
Why do I have to have a 2019 SEL smh lol
hey man do you know any links to ford fusion 2017 se mustang style headlights ? i’ve tried finding some but they look sketch i would like your opinion
Hey man best advise I can give you is if your on a budget, go with the ones that are already made, you might score out on them and when they do start going bad, get someone to retrofit them with better quality hardware. I recently upgrade mines and so far they work a hundred times better than stock which is most often the case with any headlight. Video coming soon
Thnk you
You could tell this man was hot
Haha it was a very hot day 🤣
That's like putting gold earrings on a pig.