I use my 1973 6 hp 62HD for trolling. At low idle while trolling it has a tenancy to creep up rpm's . Is there an adjustment i can make to stop the creep?
love this engine, bought one for my dad (new)..at 58 hours it drop bottom plug, told my dad to float test it..if it floated we'd used it some more..course it never floated..put it in another plug and away we'd go..dad pasted away back in 82 and it never been used again..some how my brother-in-law has it..been trying to get it back for years...oh well.
hoping your still on here as all the videos i see are from the past i have a 6hp chrysler outboard that needs a spark plug coil they are rivited to a plate how and where can i get this replaced ive talked to local marinas and they tell me goodd luck
I have this same model and I'm experiencing overheating issues. The water pump is working but I'm thinking that the compartments around the cylinder heads may be clogged. I was wondering if that could be the problem, and if so, if I remove the head will I be able to find a replacement head gasket? Thanks for your time.
I use my 1973 6 hp 62HD for trolling. Is there an adjustment to the steering tension. It flops back and forth too much when trolling at idle. Thanks for all your information here. Darin
Hi, I have been watching all of your videos for a couple of years now, thank you so much for all of your information. I am working on building the entire white collection from 2-15 h.p. so you are helping me a great deal. Graeme from Canada.
Any idea if they differ in size a great deal. I have a 1969 Chrysler 5hp, but the engine block is cracked. There's a few blocks on eBay, ranging from 5 to 10hp. They look identical. Are the cylinders bigger or are the blocks themselves bigger? think I could put an 8hp in it?
Hi what size boat where u using cause I got a 4 5ft broocker powered by a 6hp Jonson seahorse & it does 31km/h (18knots) flat out with fishing gear & my self...
hi. i got this motor with 6hp. can i make it faster? sometimes it drives fast when it runs on high rpm, but the most time the rpm ist too low :/ thanks
Hello again I got a 10 foot boat that can't have a heavier motor than 27 kilos (59 pounds)! I have asked this question before about a Evinrude 6 hp. How heavy are a 6hp Chrysler between 1970 and 1985?? In Norway it's very rare to find Chrysler motors so thats why I'm asking you. Btw nice outboards!
if its that bad, just keep for parts for yourself..I app you going after it..we'll can it lesson No.4895..thanks again...I'll start to look again down in this area..
I think this computor is having a brain fart..just can't make it come up.wait a minute..Your talking about the 6 hp..now i understand..also did you run the engine you picked up for me?
![⚙️🔩🔧YAMAHA P55A, Chrysler. Старые лодочные моторы [часть 12]](http://i.ytimg.com/vi/LVjpqx9qJzQ/mqdefault.jpg)
I have the 1968 6.6 HP still runs great there was no planned obsolescence in 1968
if i shut my eyes that sound brings back so many happy fantastic memories fishing with my dad
Me too. I used to go fishing with my dad and my grandpa but the motor broke down and there were no replacements available. *Good times* :(
Great old outboard motors. I have a 1976 Chrysler 6hp. It pushes my 1976 12' Mirro Craft around the lake.
I use my 1973 6 hp 62HD for trolling. At low idle while trolling it has a tenancy to creep up rpm's . Is there an adjustment i can make to stop the creep?
love this engine, bought one for my dad (new)..at 58 hours it drop bottom plug, told my dad to float test it..if it floated we'd used it some more..course it never floated..put it in another plug and away we'd go..dad pasted away back in 82 and it never been used again..some how my brother-in-law has it..been trying to get it back for years...oh well.
Couldn't you in theory wire in a momentary push button switch to the ignition wires for a kill switch?
I thought you did not want to drive that far..That is a nice motor.
Hei
It’s a good motor? I find today 3 pcs. free from one family. It’s look like compact and light weight motors. I try to fixing all.
Is there a place i can email you as i have another idle question for you.
Hi Ted, I am looking for a 6HP Chrysler for the Maritime Museum in Okoboji to donate. Do you have any in the 5 to 15 HP range?
hoping your still on here as all the videos i see are from the past i have a 6hp chrysler outboard that needs a spark plug coil they are rivited to a plate how and where can i get this replaced ive talked to local marinas and they tell me goodd luck
This one and the other two vid's i did last night are motor's that were in the big pile i just got.
I think you need to get that motor back..
I have this same model and I'm experiencing overheating issues. The water pump is working but I'm thinking that the compartments around the cylinder heads may be clogged. I was wondering if that could be the problem, and if so, if I remove the head will I be able to find a replacement head gasket? Thanks for your time.
I use my 1973 6 hp 62HD for trolling. Is there an adjustment to the steering tension. It flops back and forth too much when trolling at idle.
Thanks for all your information here. Darin
@@darinosland7339 yes there is a friction adjust screw that is on the swivel tube
if you have an opportunity would you post a pic I just looked and can't find it. thanks again
just found it! had to put tilt lock up to find. thanks.
Hi, I have been watching all of your videos for a couple of years now, thank you so much for all of your information. I am working on building the entire white collection from 2-15 h.p. so you are helping me a great deal. Graeme from Canada.
Any idea if they differ in size a great deal. I have a 1969 Chrysler 5hp, but the engine block is cracked. There's a few blocks on eBay, ranging from 5 to 10hp. They look identical. Are the cylinders bigger or are the blocks themselves bigger? think I could put an 8hp in it?
Hi what size boat where u using cause I got a 4 5ft broocker powered by a 6hp Jonson seahorse & it does 31km/h (18knots) flat out with fishing gear & my self...
I enjoy your channel. Curious how to fix fuel leaking at motor nipple when fuel line connected. Mine will spray fuel as I prime.
They make replacement fittings
Sounds good, never see these anymore in the salt water...
whats up man, i have a 1973(i think) chrysler 6hp. i need a top(cowl,hood) mine blew off and i didnt know it until yesterday. you have any for sale?
Would you buy one of these for 350 in great condition with a 3 gallon tank? Would put it on a 13' avon inflatable
hi. i got this motor with 6hp. can i make it faster? sometimes it drives fast when it runs on high rpm, but the most time the rpm ist too low :/ thanks
I have got one of these. could you do a video on showing us how to do the seals in the lower gear case. shift Rod seal and drive shaft seal thanks.
+padman81 It might be awhile but the next time i do one i can make a video.
Hello again
I got a 10 foot boat that can't have a heavier motor than 27 kilos (59 pounds)! I have asked this question before about a Evinrude 6 hp. How heavy are a 6hp Chrysler between 1970 and 1985?? In Norway it's very rare to find Chrysler motors so thats why I'm asking you.
Btw nice outboards!
Dinkymaster7 The 4.4/8hp Chrysler's are all around 47LBS. The 9.9/15hp Chrysler's are 54LBS.
if its that bad, just keep for parts for yourself..I app you going after it..we'll can it lesson No.4895..thanks again...I'll start to look again down in this area..
I have this same motor....
See the video.
I think this computor is having a brain fart..just can't make it come up.wait a minute..Your talking about the 6 hp..now i understand..also did you run the engine you picked up for me?