🎈여러분, rolife tgb06은 라이트에서 접촉이 잘 안된다고, 질문이 많으셔서 안내해 드립니다 1.조립하기 전에 건전지를 넣고, 이상이 없는지 전선 테스트를 먼저 하세요 2. 조립 후 같은 색 전선끼리 연결 후, 건전지 박스에서 on상태로 두어야 됩니다 3. 지문과 마주 보는 안쪽 보드를 잘 고정해야 라이트 터치가 잘 됩니다 위의 내용대로 했는데 이상이 있다면, 교환해야 됩니다 🎈Everyone, lifetgb06 can't be touched in the light, so I'm informing you because you have a lot of questions 1. Put in the batteries before assembling and test the wires to see if there are any problems 2. After assembling, connect the same colored wires and leave them on in the battery box 3. You need to fix the inner board facing the fingerprint so that you can touch the light well If there's anything wrong with the above, you need to exchange it
안녕하세요...한국어 번역이 서툴러서 죄송합니다. 제가 가든 하우스를 지을 때 도움이 된 이 영상을 올려주셔서 정말 감사드립니다. 저는 손 장애를 가지고 태어났기 때문에 그것을 완수할 수 있을지 자신이 없었습니다. 조심스러운 발걸음을 지켜보며 기분 좋게 마무리했어요 ((^_^
Nice to meet you.😊 I don't know where you're from, but I'm not good at answering in English I'm glad I'm a help to you. If you need another work video, please comment. I hope it helps you again. Have a nice day today~🎈
Thank you so much for the video. I followed it to build my nook and I’m finished. Sadly though the lights won’t work and where exactly do I pull the wire from the light on ceiling through? I’m confused there.
Figured it out! And got both lights working now! 🎉 it’s not the box that’s faulty, it’s the plate with the 4 wires coming out of it. So if I tap it it works. Lol
just finished this one and it was the most difficult one i have done so far, very delicate and the video skips the tricky parts also the instructions are hard to follow and the pictures are in black and white making it hard to find the part you need...
hi there, i liked your video. i followed your instructions and the instructions it came with exactly but the lights aren't working. do you happen to know what is wrong with my set? thank you :)
@@Dontwannaknoow Leave the battery box switched on and press the front touch point. I don't think the light is coming on because the touch part doesn't touch well
Oh, I only used the ingredients in the components. I didn't measure the total length, but I cut it to 16.8, 8.2, and 4.2cm, respectively, according to page 22 of the manual
Hi , it is a really relaxing video , good work. So i want to present this to my friend , but i never done nook books. Do you think will it to hard for me ? If so can u recommend to me easier nookbooks ? Thank you ❤
Thank you for watching the video It's not that hard even if it's the first time, so try it I think it's easy to open a book store called "rolife tgb 07" among the recent ones Bookstores are high in quality and are good for creating a mood If it's a gift, my friend will like it, too
@@minirose-miniature thank youu for the respond ✨✨ My friend is a total plantlover , so she will like that i am sure I hope i can make it , your video will be really helpful , thanks again.
Its awful. The frame is so weak yo push together at the layer stages. Mine smashed and i had to super glue it. The circuitry is faulty and only one light barely comes on. For what you get compared to what thet promise, it's very over priced
I recommend using a knife, not your hands, when hitting pieces. And, be sure to test the bulbs first before making them. If there is a defect, it is a priority to exchange or return it first. The quality of Robothime products is better than other products. I felt this kit was a bit weak. I think it's like a defect caused by the transparent outer wall?. I hope you succeed next time~
@@minirose-miniature it wasn't to separating that was the issue, just the assembly of the wooden outer sides. I was being gentle with it but the roof structure is so flimsy it snapped. Ill bear it in mind to test the bulbs with the other sets we have but unfortunately returning is no easy matter as the store is across the water from where we live. It would cost more to go back to exchange it. At this point I am just going to purchase some cheap fairy lights to pin around the outside. It's a shame that it isn't functioning as it should after all the effort. I wouldn't buy them again. I can't figure out why I still had three pieces of the hanging flowers left over. So I glued them to the front to make it personalised and the spare snake plant is stuffed in a draw inside 😂
@@chantaldobson713 I'm very upset if I work hard and the result is not good. I feel sorry while reading this. However, I think that future plans will go well and look forward to it. 🌹
🎈여러분, rolife tgb06은 라이트에서 접촉이 잘 안된다고, 질문이 많으셔서 안내해 드립니다
1.조립하기 전에 건전지를 넣고, 이상이 없는지 전선 테스트를 먼저 하세요
2. 조립 후 같은 색 전선끼리 연결 후, 건전지 박스에서 on상태로 두어야 됩니다
3. 지문과 마주 보는 안쪽 보드를 잘 고정해야 라이트 터치가 잘 됩니다
위의 내용대로 했는데 이상이 있다면, 교환해야 됩니다
🎈Everyone, lifetgb06 can't be touched in the light, so I'm informing you because you have a lot of questions
1. Put in the batteries before assembling and test the wires to see if there are any problems
2. After assembling, connect the same colored wires and leave them on in the battery box
3. You need to fix the inner board facing the fingerprint so that you can touch the light well
If there's anything wrong with the above, you need to exchange it
Thankyou so much this video was invaluable loved every minute especially the little tour at the end. I’m now officially hooked on ‘book nooks”❤
Thank you~🌹
I have bought this one and after watching this video I’m excited to start. Looks amazing. Thank you.
Yes, I hope you make it pretty 😊
This video helped immensely!!!
Thank you~🦋
영상보고 쉽게 따라 할 수 있을거 같아요❤❤❤
🤩🤩🤩
흔들의자에 앉아 잠시 쉬어가고 싶어지는 예쁜공간이었어요💙
무더운 여름 쉬어가야죠~건강하세요 ☀️ 💛 🔥
안녕하세요...한국어 번역이 서툴러서 죄송합니다.
제가 가든 하우스를 지을 때 도움이 된 이 영상을 올려주셔서 정말 감사드립니다. 저는 손 장애를 가지고 태어났기 때문에 그것을 완수할 수 있을지 자신이 없었습니다. 조심스러운 발걸음을 지켜보며 기분 좋게 마무리했어요 ((^_^
Nice to meet you.😊 I don't know where you're from, but I'm not good at answering in English
I'm glad I'm a help to you. If you need another work video, please comment. I hope it helps you again. Have a nice day today~🎈
@@minirose-miniature 당신은 너무 친절!
Thank you so much for the video. I followed it to build my nook and I’m finished. Sadly though the lights won’t work and where exactly do I pull the wire from the light on ceiling through? I’m confused there.
Figured it out! And got both lights working now! 🎉 it’s not the box that’s faulty, it’s the plate with the 4 wires coming out of it. So if I tap it it works. Lol
I'm glad both lights are working~^^
Have a nice day~😄
마음이 편안해지는 원더랜드 오늘도 힐링하고 갑니다~😊
감사합니다~🧡
just finished this one and it was the most difficult one i have done so far, very delicate and the video skips the tricky parts also the instructions are hard to follow and the pictures are in black and white making it hard to find the part you need...
The manual was in black and white, so I had a hard time with my eyesight.
Although it looks easy, it is a difficult kit to handle.🌹
hi there, i liked your video. i followed your instructions and the instructions it came with exactly but the lights aren't working. do you happen to know what is wrong with my set? thank you :)
Thank you for watching my video
I think we need to reset the wires
Miniatures have very thin wires, so they don't cut off easily or power up
@@minirose-miniature thanks so much! i'll try that :) have a good day/night!
@@bearloom I'll look forward to the kit being completed
"Fighting!" 😊
I’m having the same issue, can’t figure out what’s wrong
@@Dontwannaknoow Leave the battery box switched on and press the front touch point. I don't think the light is coming on because the touch part doesn't touch well
Hey, How can I cut square pipe to 16,8cm, 8,2cm and 4,2cm if I have in my box only one pipe 17,4cm?
Oh, I only used the ingredients in the components. I didn't measure the total length, but I cut it to 16.8, 8.2, and 4.2cm, respectively, according to page 22 of the manual
J'ai le même problème...
@@lb3375I think you should have two of those sticks. I did
Thanks for this video!
i only have 1 square tube its 152mm long. i dont have a 168mm possible lol. im gonna have to tape it or something
Love it tanke you for the video 🤩❤️
Thank you~🧡
I love the chair. It look comfy .
me too~🌷
I love your video! Please help- where is C1 and C2? I cannot find mine anywhere!
C1 is the floor when you start (1:38) and C2 is the floor where you go up the stairs and pick it (3:09)
Hi , it is a really relaxing video , good work. So i want to present this to my friend , but i never done nook books. Do you think will it to hard for me ? If so can u recommend to me easier nookbooks ? Thank you ❤
Thank you for watching the video
It's not that hard even if it's the first time, so try it
I think it's easy to open a book store called "rolife tgb 07" among the recent ones
Bookstores are high in quality and are good for creating a mood
If it's a gift, my friend will like it, too
@@minirose-miniature thank youu for the respond ✨✨
My friend is a total plantlover , so she will like that i am sure
I hope i can make it , your video will be really helpful , thanks again.
Muchas gracias ❤
Se me ha estropeado una pieza ¿donde puedo conseguirla? Gracias
I'm sorry, but could you repeat that? There's an error in the translation, so I can't communicate
섬세한 솜씨는 여전합니다 부럽네요😅
안녕하세요
응원합니다..
감사합니다 ~😊
What’s the best glue to use?
Thank you for watching 😊
These days, glue is of good quality
But if I recommend it, UHU products are good
직구로 주문 하나 해놨는데 접착제는 포함 안되어있다고 하던데
목공용 본드 사면 되나요?
넵. 해외 배송엔 접착제, 건전지는 운송금지 조항이 있어서 따로 구매하셔야 됩니다
목공 본드나 쿠팡에 uhu 제품 구입하면 좋습니다 ⚘️
@@minirose-miniature 우후 다용도로 사면 되겠죠? 감사합니다
💕💕💕💕
Helpful but video needs more light.
Its awful. The frame is so weak yo push together at the layer stages. Mine smashed and i had to super glue it.
The circuitry is faulty and only one light barely comes on.
For what you get compared to what thet promise, it's very over priced
I recommend using a knife, not your hands, when hitting pieces. And, be sure to test the bulbs first before making them.
If there is a defect, it is a priority to exchange or return it first. The quality of Robothime products is better than other products.
I felt this kit was a bit weak.
I think it's like a defect caused by the transparent outer wall?.
I hope you succeed next time~
@@minirose-miniature it wasn't to separating that was the issue, just the assembly of the wooden outer sides.
I was being gentle with it but the roof structure is so flimsy it snapped.
Ill bear it in mind to test the bulbs with the other sets we have but unfortunately returning is no easy matter as the store is across the water from where we live. It would cost more to go back to exchange it.
At this point I am just going to purchase some cheap fairy lights to pin around the outside.
It's a shame that it isn't functioning as it should after all the effort.
I wouldn't buy them again.
I can't figure out why I still had three pieces of the hanging flowers left over.
So I glued them to the front to make it personalised and the spare snake plant is stuffed in a draw inside 😂
@@chantaldobson713 I'm very upset if I work hard and the result is not good. I feel sorry while reading this. However, I think that future plans will go well and look forward to it. 🌹