In my system it wasn't exactly as in yours. I had also to add two more network adapters (bridge and nat) and than it worked. But I have to thank you, this was really helpful
Thank you very much. GNS3 is highly complex software to me, even after Cisco Packet Tracer. I couldn't figure out how to make the GNS3 VM server pop-up as active in GNS3 but your video really helped a lot!
In Windows OS, open the CMD app and type (w/o quotations) the following. "cd C:\Program Files\Oracle\VirtualBox". | This is likely where your VirtualBox .exe files are located. If not, you may need to navigate your local C: drive until you find it and then copy the location that's in the UNC\address area (i.e. \\computer-name\shared-resource-pathname). After you enter the CMD prompt to switch your directory, input this command. "VBoxManage modifyvm "YOUR VM NAME" --nested-hw-virt on". Where I typed "YOUR VM NAME" is where you input the name of the VM that you installed in the hypervisor (VirtualBox). For example, if you input the cmd line "VBoxManage modifyvm "GNS3 VM" --nested-hw-virt on" and don't receive an error after you hit enter, then it worked. Just reopen VirtualBox or whatever platform you're using and navigate the processor settings to enable the Nested VT-x/AMD-V. Shouldn't matter if your computer uses Intel or AMD. Hope this helps.
The option to enable nest VT was grayed out so I checked online and I was able to enable it with CMD. It is ticked now but I still get KVM Support Available: False. What am I missing? Kindly help me out
@@wonpiri___jinani3340 Nope, it didn't. Few days ago I resetted my PC and I haven't tried it again. Now I am learning Kali Linux tutorials so I haven't really checked to install it again. Maybe after the linux tutorials, I'll try to get it again
Bhai i can't enable my port even my vm is not taking IP and port etc i checked in bios virtualization is on please help me even i am ready to pay if you want its veey frustrating
Four hours of struggling and he solved it with 11 minutes of content.
Thank You.
👍
In my system it wasn't exactly as in yours. I had also to add two more network adapters (bridge and nat) and than it worked.
But I have to thank you, this was really helpful
Thank you very much. GNS3 is highly complex software to me, even after Cisco Packet Tracer. I couldn't figure out how to make the GNS3 VM server pop-up as active in GNS3 but your video really helped a lot!
Keep loving
Thank you for explaining so clearly and precisely
Thanks bro, keep loving
Helpful 👍🏻
I have Windows 11 and even after enabling virtualization, it still says False. Any tips to resolve the issue?
Same
So still no way to use the newer XR or XE stuff with GNS3 it seems?
Hello did you installed nepcap?
why we need gns3 and gns3 vm together ?
Great work! Thanks!
Thanks for watching
Thanks a lot boy 👋👋👋👋👋👋👋👋👋
Thanks for watching, keep loving ❤
This was really helpful
Hello my virtualisation bios is active and the seeting case VT-X/AMD-Y is active but the KVM SUPPORT AVAILABLE IS ALWAYS : FALSE
The very step would be to enable VTx in the bios of your computer.
Then enabling it in the Virtualbox image would reflect the change.
hi man ive followed every step but my KVM Support is still false. any opinions?
In Windows OS, open the CMD app and type (w/o quotations) the following. "cd C:\Program Files\Oracle\VirtualBox". | This is likely where your VirtualBox .exe files are located. If not, you may need to navigate your local C: drive until you find it and then copy the location that's in the UNC\address area (i.e. \\computer-name\shared-resource-pathname). After you enter the CMD prompt to switch your directory, input this command. "VBoxManage modifyvm "YOUR VM NAME" --nested-hw-virt on". Where I typed "YOUR VM NAME" is where you input the name of the VM that you installed in the hypervisor (VirtualBox). For example, if you input the cmd line "VBoxManage modifyvm "GNS3 VM" --nested-hw-virt on" and don't receive an error after you hit enter, then it worked. Just reopen VirtualBox or whatever platform you're using and navigate the processor settings to enable the Nested VT-x/AMD-V. Shouldn't matter if your computer uses Intel or AMD. Hope this helps.
@@jtrraps2717 it worked bro, thanks
im not able to check the nested VT at 7:33
Did you resolve this issue?
sur 6:11 i can't enable what is the problem
THANK YOU SO MUCHHHHH!!!!
Thanks for watching, keep loving
Thank you friend
what are your Laptop specs? My Laptop going 100% CPU utilization
Hi, I am getting this error "Could not find an iourc file (IOU license),please configure on IOU license"
THANKS YOU SO MUCH !
Blessings
Thanks
Greeeeeeaaaaaaaaaaaaatttttttttttttttttt thanks alot
Thank you for this. In my installation Enable Nested VT-x/AMD-V option is not active.
Check your bios setting, virtualization enabled or not
@@Technetguide Hello, thanks for reply. I checked that and it's on. I will do more research. Or send me link to any help you can find. Thank you.
@@HezwickNgambi th-cam.com/video/yp9CFQhEaUg/w-d-xo.html&ab_channel=ProgrammingKnowledge2
@@HezwickNgambi th-cam.com/video/nI1gKNGKDws/w-d-xo.html
@@HezwickNgambisame problem
why cannot tick the Enable Nested VT -x/AMD-V and KVM support still false
Thank you !
Thanks for watching, keep loving ❤
merci beaucoup pour l'explication
Hey jeets, quick tip, use an AI to create the voiceover. We can't understand you. Thanks - English Speakers
Please solution virtual host only not connected gns3. Ping IP request time out
The option to enable nest VT was grayed out so I checked online and I was able to enable it with CMD. It is ticked now but I still get KVM Support Available: False. What am I missing? Kindly help me out
Did you ever got it to work? I have the same problem :(
@@wonpiri___jinani3340 Nope, it didn't. Few days ago I resetted my PC and I haven't tried it again. Now I am learning Kali Linux tutorials so I haven't really checked to install it again. Maybe after the linux tutorials, I'll try to get it again
I don't know why he didn't work in my computer.The vm did't go green
still works!
KVM support is still false please help me
Bhai i can't enable my port even my vm is not taking IP and port etc i checked in bios virtualization is on please help me even i am ready to pay if you want its veey frustrating
did you ever fix it? I am having the same issue
chief,i couldnt enable virtualiation the the tick was greyed out. how do i enable this virtual box please ?
You need to first shutdown the running VM. Once it is shutdown, you should be able to check/uncheck the box.
@samisonivana4480 Sorry buddy! Don't even remember now. If I revisit this setup soon I ll definitely let you know or make a video on it.
Gonzalez Betty Walker Thomas Miller Thomas
Okay okay okay 😂😂😂
Thank you!