Assembly install tutorial cover BREMBO brake all cars
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2017
- Installation assembly cover brakes brembo.
necessary:
silicone, scotch tape, diluent, cutter
INSTAGRAM / cars_and_furious_
FACEBOOK bit.ly/2fdn7Fo
TWITTER / carsandfurious_
If you love cars you should subscribe
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Can I do this on my monte carlo
Great video. Thanks for posting
You are welcome 🙂
Can u use heat silicon that is red used on fireplaces
It can also work that silicone. Not sure if the grip is strong
Is it now hard to replace brake pads with this mounted?
Hello, no on some cars you don't have to disassemble you can replace the same. on other cars just cut the silicone to remove them
Ah Thanks!
@@carsandfurious_ I am pretty sad tho, I have like that metal rod design brake... Which means I have a metal rod coming out of it...
What was the name of your sealant? How long did you let the sealant set and dry? I just bought a set of Chinese Brembo caliber covers.
Hello, the sealant is the Bostik poly max original express. i did the work in the evening and next morning you can travel perfectly
@@carsandfurious_ 👌
@@richardbrowne3641👍
Witch size should I buy for my MK7 TDI ?! Btw than you for vide . 👌👌
Hello, these covers in the video are: front 27 cm length, check the length of your brake caliper. Thanks 👌
@@carsandfurious_ thanks 😎👍
@@moha4917 👍👍👍
The large covers about 10 inches in length and the med about 7.2/7.5 ?? In length put 2 small screws in them instead of all that glue
I bought mine on ebay.
But when you Want to change the brake did you must do this again every chnage of brakes
Yes, on some cars you have to redo everything every time you change the brakes. on others not.
Okay thx
Hi do you know the size for front and rear for hyundai creta model 2022
Hi, no sorry, I don't know the measurements
I ordered a pair from eBay and got the small- medium. I drive a Scion xB and they won’t fit!! What size are these?
Hello, message arrived late, these are large and medium size
Will fit 2017 Dodge Durango r/t
Hello, I think so. however the largest measures that make these covers are: front 27cm rear 24cm. If your brake caliper is longer it will not fit
Anyone know what ones will for a 98 Audi A4? Thank
These fit for audi A4. you have to choose size M and L
What i do i put heavy duty magnet all in place👍👍
How do you change your brakes?
Hello, when you need to change the brakes remove the cover. on some cars it is not necessary to remove the cover
What glue did u used? Was it silicone glue?
Hello, yes from Bostik BOSTIK Poly Max Original Express. Very good product
y con ese pegamento soporta el calor de los caliper?
Hi, yes yes perfectly. Just think, I had those covers and the car for 4 years, never any problems
Better way us just put to small drill holes and screw it to caliper easier and a lot less time
Hello yes also so. But I can tell you that by doing as in the video, I've never had any problems, none have ever come off, zero problems
no heating of the brakes.no problem
Crazy. What if it detach? It is not safe
Hello, no the important thing is to position them well. Assembled 2 years ago and still are there.
@@carsandfurious_ did you replace the brake pads ???
on some cars you can replace the brake pads without removing the cover@@ciprianslatineanu440
He will fix it again...He's a Genius.
How can I change brake pads after installing brembo
just cut the silicone with the cutter.then he resigns
cut the glue with the cutter.
Thanks
Where i can find this cover?
Hi, they were easy to find before. I bought them at a car tuning shop
Questo silicone è ad alta temperatura???
ciao, non so esattamente che temperature riportava, parliamo di un video di alcuni anni fa, però su varie auto ho utilizzato questo e non si è mai scollato
Looks nice! But it’s a waste of time. You will basically get rid of it, every time you’ have to change your break pad. What if one day you’re driving on the high way and this thing comes off?!!!
Put putty for glass windshield. it will never come off.
😅😅😅😅
SOMEBODY COME GET THEY MANNNNNS WHOO TF WHOOOOOOOS MAN IS THIS 🤷🏽♂️
How much time required the silicon to get hard?
Hello, 3-4 hours, but you are advised to work in the evening and you can use the car 100% in the morning
Where did u get these?
Hello, on ebay, but now I can't find them anymore. I needed others
kinda makes me nervous that this would over heat the brakes.
no problem for two years
The rotors will not be affected by this.
Link
Hi, unfortunately I bought them in the store. try to see on aliexpress
Side
No thanks I’ll stick with painting mine thanks
If your going to fake it at least put the break fluid drain at the bottom
NOOO!real brembo, fluid drained at the up. always!!!
High performance callipers always bleed at the Top buddy
Every Caliper
Yea put it at the bottom so no air comes out when you bleed it. Great thinking Williams xad
What a great idea stick them on with silicon 🤣
Best way is drill two
Holes screw them on then when you change the brakes you just unscrew them far better than sticking them on hoping they won’t come off
Hi, I've now sold that car, but I've had the silicone covers for 3 years and they've never come off, even doing a lot of km.😅
Fake it till u make it
😄😄Many just like aesthetics
It is should be upside down
Hello, no no you must always mount with the bleeder (the screw with the cap) at the top
@@carsandfurious_ I’m 100% sure it should be the opposite
just save the money and buy real calipers
you need to pay attention to the safety
okay you give us the $400 for them lol vs $20 no safety issues w covers
Wrong way to install these go on (red memory) channel he puts them on the right way no glue
With this type of silicone there are 2 years do not detach
@@carsandfurious_ th-cam.com/video/Ckna0qMIfkI/w-d-xo.html
Red memory did them better but he installed them upside down 😂😂😂
Up-down...
Hello, they must be mounted with the tube below and the bleed screw above
Are you 12 years old?
Too bad audi brakes are way different than American cars
lol again how? brake pads, calipers and same shit my u are the negative one
@@dflex4180 they are not the same dude lol. Take a look at other cars.
😭😭😭😱
Why???🙈🤮
😄They are whims
Pimp my ride low budget
Carl Poppa : is this ultimate cheapskate
What? 😂😂
Quindi ci voglio 20 min per mette un cazzo di silicone porca troia che nervoso Maremma cane
si, poi devi aspettare che secchi il silicone. ti consiglio di farlo di sera, così il giorno dopo sei sicuro che tutto ok
eBay specials 😂😂.. who uses glue??
high temperature glue. no problem
Wait what? This is fake!
Seems dangerous to use.
Hello, no no problem. Fitted a few years ago never unglued.
sto male
que ganas de hacerse pendejos jejejeje
Also wouldnt ever suggest putting any type of glue on your braking system ever. This is coming from a mechanic
its silcone lol as a mechanic you should know this DOES NOT mess anything up in the breaking system...its on the exterior
@@dflex4180 True. mounted for 2 years no problem 👍
Trolled
A parte il fatto, anche fossero pinze Brembo originali con quei cerchi non li vedrebbe nessuno, ma scommetto che alla prima discesa ,appena si sono riscaldate le pinze il caro polimax si è scollato e la cara coverina si distrutta tra il cerchio e la pinza stessa, bello schifo di video.
Ciao, no le misi più di 2 anni fa e non si sono ancora mosse, ora l auto non ce lo più, ma la vedo in giro con ancora le cover. Io ho pulito bene le pinze e nessun problema.
Ridicule
BIO a oui je pense la même.
DO NOT DO THIS!!!
If you have to GLUE, you got the wrong ones, or they just don’t make any that fit your calipers.
...but NEVER glue them to your calipers!
...smh... 🤦🏽♂️
Hello, I glued them 3 years ago and they still haven't come off.
LMAO these covers don’t fool anyone! Never seen anyone work so hard to install a piece of plastic that COULD fall off while driving, then what?
Buy another till it falls
😱