Thanks 🙏 for this great video and i want to Try it 😅 first I will wrap and extra I will try to put this nice led. I might mix it with your video Hope it’s ok for you too. Best regards
I'm about to tackle this project with the help of your video. My bike is a 2018 k1600b and I'm worried that my fairing removal is going to be too difficult for this less inept guy!😱😱 What year/model is your bike?
Hi, do you have a vidoe to install thos fog lamps too? Looks awesum those extra blinkers, but here in Holland the blue isnt alloud so will look for other collour.
I would be concerned that in some States a Blue LED lit constantly would be illegal. I personally would have installed a switch in the feed line for the constant on light. Is it distracting while you're riding?
I looked at the fairing and said "Dude, got 'em on the wrong side." Then I figured you swap them back and the plugs we the same, so all good. I like them, may have to get a pair for my RT once I get my my other lights installed
@@BMWDIYGuy sent a request, worst case the from 2014 the roundel is raised up on a bit of flashing instead of flush to the fairing so could just modify that and slot one of these into it, just a bit of extra work..
Stefan - does your bike have a canbus system? My 2019 1250GS has canbus and I want to install these lights. I’ve got a CANSmart controller for other auxiliary lights but the wiring you did seems very simple. Other than……. How do you find a switched live? I have been told that using the aux power socket is flawed if you plug your bike into the mains each night via a battery conditioner as it the turns on the led lights!
Great questions.. so in the case of the battery conditioner, it did not turn on the LEDs, so that at least was fine. Your bike being significantly newer, there may be some changes I am not familiar with to be certain. I believe my bike has canbus as well, but just wired these lights very easily and works great, no issues, works perfectly.
Not sure why cannot use a bmw y connector instead of splitter
Something I’m missing?
You absolutely could.. did the install using the kit, so only what they provided.
Thanks 🙏 for this great video and i want to Try it 😅 first I will wrap and extra I will try to put this nice led. I might mix it with your video Hope it’s ok for you too.
Best regards
They really are great lights!
Awesome video.Your detail of the install is fantastic. Lights look great... hoping you are planning on doing more DIY on the 1600.
Definitely my goal.. projects for the 1600.have slowed down a bit with the turn of the weather.
I'm about to tackle this project with the help of your video. My bike is a 2018 k1600b and I'm worried that my fairing removal is going to be too difficult for this less inept guy!😱😱
What year/model is your bike?
I am sure you will do great! It is a 2012
Nice! Can’t to see what BMW has in store for us in 22 for this great bike.
Hi, do you have a vidoe to install thos fog lamps too? Looks awesum those extra blinkers, but here in Holland the blue isnt alloud so will look for other collour.
I dont have a video on the fog lights, but Schrodie will give you a choice of light colors too! 8)
Goo b Gone
I would be concerned that in some States a Blue LED lit constantly would be illegal. I personally would have installed a switch in the feed line for the constant on light. Is it distracting while you're riding?
Zero issues so far, no problems at night or being distracting and no issues with law enforcement as well.
BMW DIY GUY I liked your video where I can buy the lights end thanks for your information
That's awesome! The link is in the video description
Anyone need a k1600 engine and gear box?
Excellent instructions, thank you.
Thank you! Happy to help!
Sooo glad I found your video!!! Do you think anything has changed or is different for my 2018 k1600b???
Thanks again!!!!
I suspect it's very similar.. happy to help!
Here is a idea. The disc version turn signal mounted at the end of hand grips. How can i get cable through the grip to turn signal
Now that is a wild idea!
I looked at the fairing and said "Dude, got 'em on the wrong side." Then I figured you swap them back and the plugs we the same, so all good. I like them, may have to get a pair for my RT once I get my my other lights installed
Great catch and yeah.. figured that out once I realized I had swapped them somehow. Thanks man, and they look GREAT!
Love it and great presentation, was very sad to see they don't have one for the 2016 R1200rt lc as I need this in my life now I've seen it!!
Thank you and can't hurt to ask, right? Maybe your suggestion will help them make one
@@BMWDIYGuy sent a request, worst case the from 2014 the roundel is raised up on a bit of flashing instead of flush to the fairing so could just modify that and slot one of these into it, just a bit of extra work..
@@jameschu8376 great idea!
Just remember the Kmart blue light special 🤣
LOL.. now that is funny! The good news is you can get other colors too!
Good job. I may of missed it. But where did you get the lights from?
Link is in the video description 8)
Stefan - does your bike have a canbus system? My 2019 1250GS has canbus and I want to install these lights. I’ve got a CANSmart controller for other auxiliary lights but the wiring you did seems very simple. Other than……. How do you find a switched live? I have been told that using the aux power socket is flawed if you plug your bike into the mains each night via a battery conditioner as it the turns on the led lights!
Great questions.. so in the case of the battery conditioner, it did not turn on the LEDs, so that at least was fine. Your bike being significantly newer, there may be some changes I am not familiar with to be certain. I believe my bike has canbus as well, but just wired these lights very easily and works great, no issues, works perfectly.
I’ll could use your old roundells! I can’t find just the metal badge in that size anywhere!
Sadly they are gone..