The UDI Arrow 5 Gets a New strut (Full Install)
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2022
- BUY STRUT HERE
US $24.95 | Left or Right 4mm Flex Shaft Cable Stainless Steel Drive Dog Prop Nut Prop Shaft Plast Gasket Brass Tube And Strut for RC Boat
a.aliexpress.com/_mOAHIM4
BUY RUDDER HERE
US $7.95 | 6061 Aluminum Alloy 60x75mm 60x95mm Rudder for RC Boat Excellent Quality
a.aliexpress.com/_mKPVjAG
BUY SERVO HERE
www.ebay.com/itm/164299016750...
You should had really sealed the mounting plate of the strut and inside the boat as it will not be the same after modifying it great idea looks great but I would had sealed the the strut plate and installed it before it was all dry
Inside the boat where all connected with upgrade I would of sealed to prevent any water passing through
Was a good video to watch as I have just purchased my Arrow 5 haven’t made mods like I have on all my other boats so this was enjoyable to watch 😊
But weight difference of upgrades is a big difference
Good job!!!
Hmm, here's an observation from a constructive criticism perspective: All that strut is doing is adding more weight to the back of the boat. It's not really necessary on that hull. Here's what I mean: The purpose of a strut is to mount/position the stuffing tube and allow the prop position/angle to be adjustable. This allows fine tuning, not only of the height of the prop in the water, but changing its angle of attack, which cannot be done in this case because the stuffing tube goes through the back of the transom in a fixed position. When using a strut, typically the stuffing tube exits the bottom of the hull, not the transom, so that it allows movement for fine tuning. I appreciate your efforts, but this is one of the limits to this particular model's design; Prop position is not tunable. Based upon how the boat runs however it's really not necessary as they did an excellent job on this guy, right from the get-go. Motor, prop, batteries and ESC upgrades are where it's at on this guy, if desired.
In cases where the stuffing tube would need to go through the transom, here's a good example of how it is done. Notice the stuffing tube should slip into the strut, and the strut he used allows easy greasing: th-cam.com/video/pCQbU3YU0Ho/w-d-xo.html
@@gerardtonno9458 Thanks for your input… I believe this is still the fastest arrow 5 to date.
My steel rope broke. Where do you recommend getting a replacement? please provide a link. Thanks! Rob
You can get it on Ali express
Hello mate! I just commented on your other video about the strut. More specific about my question is on this video, video time 1:25 the one you holding, the black made of plactic strut.. how did u installed that and do you have a link of that
That strut is aluminum.. it’s the stock strut from a SONICWAKE v2.
Check out my 6s arrow 5 !!!
Is the shaft right or left turn?
I use a left turn shaft
Link for motor please.
Thanks for watching! The motor is off of an arrma big rock. I believe it’s 3200kv but will not self right with this motor. I recommend using a good outrunner motor. 👍🏼
@@gen1power102 thanks