The Most Insane 10-Carat Earrings Made by Hand!
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- The Most Insane 10-Carat Earrings Made by Hand!
See how we make solid platinum earrings using 10 carats in diamonds. With stones this size, diamond earrings like these are not for the faint of heart!
Take the complete journey as a Master Jeweler Gaston Rives forges the earrings frame from scrap platinum, then shapes the concentric loops, and prongs holding the beautiful diamonds in place.
From the hissing of the torch to melt the platinum, to the metal clanking of the anvil, we hold nothing back in this immersive, sensual experience.
To request a pair of handmade earrings like this or any other piece of custom jewelry, please click on the link below:
www.crmjewelers.com/custom-je...
Here are the different sections of the video:
00:00 Intro
00:11 Weighing both 5-carat diamonds used to make the earrings.
00:23 Melting scrap platinum to make the earrings.
01:10 Forging one piece of platinum to make wire for the earrings.
01:48 Making the 4 rings for the earrings.
02:46 Making the prongs and welding them to the rings.
04:17 Making and welding the base for the rings.
05:22 Welding the posts.
05:40 Mounting the stones.
06:10 Final polishing.
06:34 The final diamond earrings next to a dime for size comparison purposes.
Please like, comment, and subscribe and help us in our quest to reach 1 million subs in 2021!
Here are some helpful links: 🔽🔽🔽
Instagram (where we post a lot of daily watch deals):
/ crmjewelers
Gaston Rives Instagram:
/ gastonjewelrymiami
Sell Your Watch Here:
www.crmjewelers.com/services/...
Sponsor or Get Featured on One of Our Videos:
www.crmjewelers.com/sponsorsh...
Configure Your Gold Chain Here:
www.crmjewelers.com/cuban-lin...
TH-cam is not a sponsor of any giveaway, prize competition, or game of chance that is featured on our channel, and you agree to release TH-cam from any liability related to the same.
All giveaways, prize competitions, and games of chance that are featured on our channel are conducted through a legally compliant and transparent platform that processes all sign-ups/payments and ensures that we have no influence over any outcome or winner selection process.
Links to legally compliant privacy notices and terms/rules can be found below:
👉 tinyurl.com/privacy-policy-page
👉 tinyurl.com/terms-page - แนวปฏิบัติและการใช้ชีวิต
To request earrings like these or any other piece of handmade jewelry, please use the following form. Enjoy! 👉 www.crmjewelers.com/custom-jewelry-form/
This earrings must be quite expensive.
raw format some photos and stick this into wikipedia .... this man is a LEGEND
@@davidkess2405 absolutely agree.
Another awesome job
Thank you Kevork for your continuous support. 🙇
Again is amazing all the work that you do
Thank you so much Eduardo. I'm glad that you like these kind of videos. They take a lot of work to make.
I never thought I’d see the jewellers sweeps in the melt bowl for high end earrings . 😳
Beautiful, wonderful, amazing, I own it
100/100👍
Double the Awesome 👏🏼
So professional
Thank you John 🙇
I loved every minute of it. I love bench jewelering.
Thank you for watching 👍
This felt like watching you built a buick in your garage. The dimensions are crazy. Everything is huge. Felt my grandkids college funds shaking in their boots.
Gorgeous stuff 💎💎 💵
Thank you so much George 👍
Master Jeweler at it again!
He bebe stops!
At 1:59 you can see how challenging it is to work with platinum, extremely high temperatures damaged the torch nozzle itself, damn!
Absolutely fantastic!!!!!!
This is so beautiful
Thank you!
Loved this video. Wonderful workmanship. Would have loved to see what they look like on the recipient’s ears.
Excellent 👏👏👏 Every time I watch your Videos and follow the Master's work, I also feel my own passion and know why I gave everything to cut and polish every single facet of a Gemstone as perfectly as possible 💎
Thank you for your kind words and support. 🙇
Love the CRM squad but guys please we need more “Betty” content, she’s fun and so positive.
Don't worry Vinnie. More Betty on the way! 🔥🔥
@@Crmjewelers cheers guys
Spectacular! These videos are never short of excellence!
I appreciate the feedback. Thank you very much for watching.
Soooooo relaxing. Ty
These videos never fail to amaze me such great craftsman's ship
Thank you Victor 👍👍
LOL It"s "craftsmanship"
Truly amazing!
Beautifully
Phenomenal craftsmanship! I love watching your videos! Not just because of the beauty of your creations, but also because I always learn something when I watch them. Thank you! Keep creating your gorgeous art!
Thank you so much Tamara! 🙇
Hello Tamara: I received your reply to my discussion about threaded posts - threaded posts are the best thing for larger 💎 diamond studs. I've found that women who wear good-sized diamond earrings never change them out - day-into-evening ease at its best! They light up a lady's face in tee-shirt and jeans or an evening gown. Threaded posts often need another person to help attach the butterfly, but, they stay on. Also, once you are used to them, you can even sleep in them. As Marilyn Munroe said: "I Love finding new places to wear diamonds"
@@19gregske55 I wholeheartedly agree! Diamonds ARE a girl's best friend! ;-) Thank you for clarifying the threaded earrings for me. :-)
Thank you for showing me how to make thingssssssss
You're welcome Matteo. Thank you for watching.
Very nice work.
Thanks 👍
Mad respect ✊
Love these videos
Thank you for watching!
Finos y elegantes, preciosos pendientes,no me pierdo ni uno solo de los videos de taller
Gracias por compartirlos, saludos
Gracias a ti Javi. Estos videos requieren mucho tiempo para filmar y editar así que apreciamos mucho to apoyo.
Such a cool video!!
Thank you for watching Rob.
My dream job, спасибо!
Keep that dream alive my friend. 🙏
amazing work i love it❤️
Beautiful work
Fantastic job
زبردست بہت خوب
I wanted to see you make the butterfly backs. Those are my favorite to make when I am done with the settings. lol Nice work as always. My studio is done after years in the working. I am now ready to start my new passion making jewelry. Fine Jewelry that it is. Videos coming your way my friend.
Funny how you always get two quick thumbs down when you upload these amazing videos. 🤦
LOL, it's all good. We know who the 2 🤡🤡 are. They live in the past and have a very sour life. 🤷
Nice job!
Damn. That's amazing
Thank you very much!
Amazing work 🙏
great work, very sharp. keep up the handmade craft!
Wonderful. Very inspiring 👌👍💯
Thank you very much for watching!
Enjoyed every minute of this ❤️🔥
Thank you 👍👍
Nice job, I just wonder why some jewelers bend down too much the prongs when setting.
The best
Qué belleza y que maestría en la elaboración de estos aretes los felicito por tan divino trabajo tan detallado y tan hermoso aplausos de pie👏🏻👏🏻👍🏻
Acharya Anubhav has an indebt knowledge in astrology. Whatever he said was absolutely correct !! Thank You very much for the prediction. He is polite as well as straight forward. Highly recommended t
Respect for Labor
wow nice work
Beautiful and powerful metal, I suppose it is platinum because the torch nozzle did not withstand the very high temperature reached. thanks for sharing.
Yes, platinum.
@@Crmjewelers beautiful work and thanks for answering Master.
@@ElierOlivos you're welcome, anytime 🙇
beautiful great attention to detail.
Thank you very much George.
This guy knows what he’s doing 😎
congratulations nice job
Hermosos 😍
Muito top nota mil obrigado pôr postar esse vídeo
Muito obrigado!
Beautiful but wouldn't it be better if they had screw back lock 💯💯💯🔥🔥🔥
Threaded post!!! Screwbacks are for non-pierced 👂
Excelente trabajo eres un profesional
Muchas gracias Ruben.
wowwww.
good job... i like it
Thank you.
Maestro Gaston, excelente habilidad! Como me gustaría ser tu ayudante.
Nice work... 👍❤
Thank you!
I'm starting to become a jeweller tooo : )
Cool 😉
Good job
I personally would’ve done it martini style
Excelente.
wow
you are so great
and are they silver or white gold?
Platinum.
Insane Indeed.
Thanks Vince!
У меня несколько вопросов. Имея ряд проф оборудования, неужели нет изложницы, зачем кузнечные работы. Почему проволоку не скрутить и не оджечь. Зачем в незакрепленном касте бором ровнять крапана если в дальнейшем они будут подрезаться. И зачем взвешивать камни если нужен их размер а не вес??? Очень очень любопытно. Хотя работа выполнена.
Спасибо!! Делитесь опытом, крассиво и дорого получается. Мир вам👍😁
🙇
Hello. So, and how can I hold them on the earnings?
How make platinium solder
At 2:28 what tool is this for cutting rings please?!? Beautiful job!!!
Hi that’s a little mandrel with grooves to mark or cut loops , I founded on EBay this was the first time I used this tool any machine shop can make this , Thank You
Great earrings. What was the thought of not using a screw back?
I think you meant to say a 'threaded post'. Screwback earrings are for non-pierced 👂ears! The earrings would slip off and get lost on the ground.
@@19gregske55 Aren't threaded posts more secure? I haven't tried them, but I've lost more earrings with traditional backs and always wondered about threaded posts.
Would love to know the specs of those diamonds ❤
Good luck
Looks great what tips would you to someone wanting to get into making jeweller?
Hi Perran , you do it if you love it and have passion for making jewelry , I’m an old man now , but if I’ll have to do it all over again , I’ll do it , there’s no money at the beginning only Glory of making jewelry , money comes after you get a lot of experience , become a diamond setter or a Cad designer, people don’t make jewelry like me anymore, but if you decide to become a jeweler , you’ll have to be the best and practice and practice till you get it right , I wish you good luck and don’t get tired and always follow your heart
@@gastonrives3392 I got my first earring made the other day how ever I didn’t do any of the the work but did more for fun and I was wondering how you learn how to do it
I learned watching other jewelers with more experienced than me , then it was up to me to even the quality or to make them better , practice makes perfect , I kept practicing over and over
Thank you Gaston for answering all these questions 🙇
@@gastonrives3392 LOVE the old way, handmade jewelry - as a (barely passable) jeweler, I love this kind of piece the best. Built, constructed.. awesome!
3:36 whats the song??
“The Best I never had”
beautiful work
back-screw-was more secure
⭐⭐⭐⭐⭐👍👍👍
Amazing work, what's the song that starts at 2:53?
"The Best I Never Had" by Victoriya
Thank you Sena canvas
@@senacanvas2185 thanks!
White gold or platinum?
Platinum.
Where you guys located in Miami?
Downtown, next to the Seybold building.
@@Crmjewelers ty for the reply! I’m heading down in October! Wife’s bday. Will stop in for sure if not to buy maybe just say hello and take a picture of your not too busy!! If bitcoin is at 100k I’m buying a Rolex!! Much love from Boston
This kind of jewelry is only for the Ritch and famous people.....and not for us poor folks that is on fixed income expense....
Never stop dreaming, Never give up my friend 😉
@@senacanvas2185 ...all I can do is dream about stuff like this .....
Why am I crying? Prob cuz I am dying n il never own 1 c of anythin...
Never stop dreaming my friend
So, what rapper are these for?😂
They're for a particle physicist.
I’m curious, because I’m still very new to silver smithing - does Gaston always melt his metals in a cupel first?? If so, may I ask why?
Looks like scraps getting re used. Also btw that's not silver.
@@coatingkings yes I am quite aware. That wasn’t my question though.
Hi I always start like that to make sure Platinum is good to work with , if Platinum is not melted right it would crack when working
@@gastonrives3392 thank you, grand maester. I’m curious, would you recommend using one with silver as well? If the intent is to have a pure silver piece, of course.
@@Four9sFineJewelry Josh you don’t want to use pure Silver , is to soft to work with and is almost imposible but it could be done , Thank You
Hi
I am a jeweler working in Turkey, can I work in your atelier?
Thank you for reaching out Ali. Right now, we're unfortunately not looking to hire anyone new.
@@Crmjewelers thank you sir
That will cost a house
decrease gold price it helps to increase jewellery sales in India
10 Karet = cheap, gotta do 14 Karat minimum to be considered fine jewelery.
Chicken 😪
Watching Eric was more fun then this videos .... Bring Eric back!!!!
Let me give you an easier solution, go see Eric on his channel. He moved. Why look for him where he's not at. 🤷
@@Crmjewelers 🤔 did he leave CRM because of the problem he had with Carlos about the escort girls?!
Not sure what you're talking about, but he left because he wanted to go independent.
This guy knows what he’s doing 😎