Great video. As you said in a previous video this 6480 has done hard hours… full throttle with the plough etc, no wonder she’s chewed up inside. Keep up the good work.
Good to see phil getting more hands on with repairs. Its absolutely essential that you learn and no better man than your father but he wont be around forever so take it what you can when u can
It’s starting to be a joke the weather so we’re going to watch our favourite farmer’s and we love to see Father Phil and lee and liv you all work together so well.So good 👍 luck 🍀.
Is ER1077 not an air in fuel system fault? I spent £900 on the same type of pump on 6465 and my pump was timed perfect and the tractor has started throwing up that code and trying to cut out sometimes. I don't think its a timing problem but you'll need to remove the rocker cover and get valve timing right by removing the valve spring and lowering the valve with a DTI gauge to get the correct degrees btdc and fit pump with the 9 mm pin. Don't drop the valve or its the head off. Jubilee clip on valve stem to stop it dropping. I'll be very interested to find a cure for 1077!
Brilliant video Phil, is there anything you guys can not do. Father Phil sounds a little better today. Are there any videos on the house coming up?. The wife said that Lee is a very good asset.
Used to drive a Tir2 Massey 7480 it used to eat fuel injector pumps, you knew when the pump was on it's way out when it became harder to start, I always associated it when it run-out of fuel because the gauge never worked thus the pump needs the fuel for lubrication. 🤔
@@FARMERPHIL3690 ah congrats man, well wear! I remember you saying the Impreza was your dream car when you were a kid(was mine too), delighted you can go get yourself the modern equivalent. Lovely engine in them, I'd love a BRZ if it wasn't for the tax!!
Lee says bolts the right way. “Boults” 😂
Hey Phil....ye fell on yer feet when ye found Lee...mighty man...
B careful or a massey garage might poach him...
Lee says u must have been on Google.......
Nearly fell outta chair laughing
Credit to Lee very handy person to have at hand love the channel
Great video Phil. Father Phil & Lee busy on repairs. Enjoyed watching 👍🏼👍🏼
Great video. As you said in a previous video this 6480 has done hard hours… full throttle with the plough etc, no wonder she’s chewed up inside. Keep up the good work.
Good to see phil getting more hands on with repairs. Its absolutely essential that you learn and no better man than your father but he wont be around forever so take it what you can when u can
The damper plate went in our Newholland t6030 last week aswell so this is interesting content to see whats goes on to putting a new damper plate in👌👍
They got very messy and complicated since the 3000 series
Good stuff lee Phil and dad
Half an hour splits our auld 500 series 😂
Nice one Phil, really enjoy the workshop videos
Lee is your best asset some young man
U should leave a camera with lee to do all the servicing vidoes seems a good man on the camera
Thank you fp for the fab videos sir in your bizzy life taken time to show us
You’re almighty lucky you can do this work at home. Save a pile of money. I like seeing this type of work on the farm.
Super video phil,like the way u show everything involved, Father phil and lee are like 2 Mcgivvers.
nice video, give the trator a good clean inside the cab and in the muggards is agood looking tractor
Is lee self trained in mechanics? Bet father Phill is pleased to have him about
He is self trained mechanic
Great video again lads.
Enjoyed the video
That's great work with your tarter farmer Phil
From the look of those front tires, she's earned a bit of loving
Its had a hard life that’s for sure 😂
Graeme Souness used to tackle the back wheels off a tractor in training .
Great video
It’s starting to be a joke the weather so we’re going to watch our favourite farmer’s and we love to see Father Phil and lee and liv you all work together so well.So good 👍 luck 🍀.
Love all your videos great lads
We have a john Deere 6420s and the engine started vibrating and she was running very rough and it was the damper plate it was 5 grand for parts
Is ER1077 not an air in fuel system fault? I spent £900 on the same type of pump on 6465 and my pump was timed perfect and the tractor has started throwing up that code and trying to cut out sometimes. I don't think its a timing problem but you'll need to remove the rocker cover and get valve timing right by removing the valve spring and lowering the valve with a DTI gauge to get the correct degrees btdc and fit pump with the 9 mm pin. Don't drop the valve or its the head off. Jubilee clip on valve stem to stop it dropping. I'll be very interested to find a cure for 1077!
Brilliant video Phil, is there anything you guys can not do. Father Phil sounds a little better today. Are there any videos on the house coming up?. The wife said that Lee is a very good asset.
Surgeon Phil 🧑🔧
Hi Guys, That is some rats nest of pipes and wires, nothing simple any more, pain in the O is a perfect description,
Isn't it like a maize that young lad must be a genius.
Nice one
Used to drive a Tir2 Massey 7480 it used to eat fuel injector pumps, you knew when the pump was on it's way out when it became harder to start, I always associated it when it run-out of fuel because the gauge never worked thus the pump needs the fuel for lubrication. 🤔
20:39 great interesting content
Very informative interesting video. Crack on
Is father Phil alright. He’s hoarse this while.
Good video farmer Phil and father Phil and led ❤❤❤
Hopefully father Phil has his voice back for the ploughing
A farmers work is never done
Well come ji
You are lucky you have Lee only for him there would be nothing fixed
Great video Phil, what County is Lee from ? Sounds like Tyrone. He's a cracking fellow, he knows his stuff alright. Greetings from Omagh ❤
Good stuff
👍
Father phil by the talk of him loves that tractor 😂😂😂
It's good that you can do all of this work, 👏
Dont let Lee go
Thought massy.top notch ya may.change color.few fiat.110.90.way go very.simple tractor no brake downs
Time that 6480 disappeared i think 🙈 i wish our one at work would dissappear
A good move I think would be to trade that and maybe something else in towards a 5S 145 50k Dyna 6. You saw how good the 5S is on demo
As my local mechanic used to say, she’s stripped down to nought
"A right pain in the hole of a tractor to work on" 😂😂😂😂
Anyone else notice how Lee is starting to look like Phil 😮😅😅
When it comes to machinery you'll either make repayments or repairs
Ye will have to set Leigh and Rebecca up and get him properly joined into the family😂😊😮
Hon da Lee fella . Derek is taking a back seat these days it seems. Trade that 6480 as soon as you can Phil 👍🏻
The 6480 will need a good wash now she's getting fixed that's some dose of man flu Father Phil has hope it doesn't last long
Hammond lane
Get a nice exhaust for her
Did you buy an Impreza Phil!!!???
I did yes
@@FARMERPHIL3690 ah congrats man, well wear! I remember you saying the Impreza was your dream car when you were a kid(was mine too), delighted you can go get yourself the modern equivalent. Lovely engine in them, I'd love a BRZ if it wasn't for the tax!!
SO Everton. Is going wrong with that tractor SO get rid 😂
Is Lee ful time mechanic for ye
Yes
Any tractor would be better than a dirty Massey Ferguson
Are you going to fix the front mud guards when she is in there
Don't forget the Giggle Pin?
Will you have any bids in the pete marquis auction
How about case or j d
There were always troublesome those 6480
first
👍👍🙏🙏🇮🇪🇮🇪👏👏
Oi.....you can't park there mate.
It has newholland steps
I've heard nothing but bad things about the earlier 64 series, which is a shame because they're a good-looking tractor 😢
Roooooters 😂😂
Should of bought a Holland
Yer gotta be sumn wit ur bum out ur sumtn because that in it is it now bud?
@@swampdonkeyentertainment English???
Definitely would be well use to spliting the new hollland 😂
Up new Holland
Yea then he'd have plenty experience pulling it apart
Massey Assey' 🫏 🫏
Anyone who buys a Massey
should get a free Lee
In the toolbox 🧰 😁😁🤣🤣
Totally shameful Phil. 🫣 the only thing that should be in the shed is not red. Oh dear.
I wish Honda would make tractors, this would never be an issue.
That's great work with your tarter farmer Phil