DIY Patio Cover/Carport made w/ RECYCLE roof panels
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2022
- This is how I went about building a 15'x18' Patio roof cover/carport
I used recycled roof panels that needed quite a bit of massaging, to be able to make them straight enough to be usable.
The insulated panels make a huge temperature difference.
I measured the temperature on one panel w/ insulation and one w/ out insulation and the temperature difference was between 12 to 15 degrees.
This was quite a project, but I am very glad that I that was able to do it.
I am not a "builder", make sure to consult w/ a professional before attempting a project like this
#diycanopy
#homemadeCarport
#sunprotection
Looks great! Wow!
thank you 🙂👍
Awesome bro. God bless
Thanks 🙂👍
Did you bolt teh vertical 4x6's to the concrete slab? OK, I see how you did it. Nice job.
Probably want to put a very slight angle on that canopy so you don't get water pooling. Even a half inch higher on one side than the other is enough.
I did put a slight angle on it
I showed how much on the previous video
The rain slides down to the left side perfectly 👍