@@herpabetic It worked great and the truck is getting the best gas mileage and power it has ever gotten. I replaced the EGR as well. BOOM she’s running gooood.
Our EGR cooler on a 2010 Isuzu NRR doesn't have the 2 fill plugs on the top to bleed the air out... should we just run it for a while with a coolant funnel topped off with coolant on the radiator?? Thanks for the video.
@@CameronsCandorOriginal you're welcome and yeah, just keep a funnel on an upper level and make sure that the thermostat is cycling correctly and you should be just fine.Check thermostat housing for a leader zurk, or if there's any desserks anywhere in the line
I am considering cleaning the EGR myself, but I am a bit afraid; however, your video has increased my confidence to do it. I wish you were in California; I would go to your shop without hesitation. Thank you so much for taking the time to make the video and explaining it very clearly; I appreciate the fact that you go straight to the source and the purpose of your videos and do not waste your time or our time as viewers; thank you for teaching very well. If you have the EGR gasket kit part number, please let me know, I would appreciate it. Thank you.
@@herpabetic is a 2014 Isuzu NRR. Also; by any chance do you know of a scanner for the is Isuzu that I can purchase to perform a Force Regeneration? maybe one that you know it works for sure for the 2014 Isuzu, Amazon or eBay? Years ago I bought one but it won't let me perform a force regeneration, I really appreciate your help.
@alexandera412 ok I must have thrown away the boxes but I do have the old set of egr coolers with numbers on them..I use napa auto parts for most parts or if u call isuzu they will provide the part numbers. Have you're plate numbers and vin available to identify
@@herpabetic Thank you for all your help, my mechanic friend I did exactly the job you did, and it went well; we just had an issue with a bolt at the end of the engine where it attaches on the passenger side that broke; it took as a while a lot of drill bits to fix it; but in the end all worked out well. Thank you so much
@@张斌-n2r okay I'll see what I can do I got covid about 3 days ago not sure how long it's going to be before I feel better the last few times I caught it it lasted about a week I am very buried in work I can try to schedule something with you
Sorry about the late reply..this utube is sometimes hard to keep up with..but soaked them in parts cleaner for about 3 days then was able to blow them out with air..did use a plastic brush some...all worked great and truck is running great again..do need to test drive though..the second u think u won with these...failure...lol..all we can do is try..most has worked out pretty good though..scan tool is at better readings for now though
Thank you man. I need to do this myself. I just cleaned the dpf system. Now this
Glad I could help
@@herpabetic It worked great and the truck is getting the best gas mileage and power it has ever gotten. I replaced the EGR as well. BOOM she’s running gooood.
Our EGR cooler on a 2010 Isuzu NRR doesn't have the 2 fill plugs on the top to bleed the air out... should we just run it for a while with a coolant funnel topped off with coolant on the radiator?? Thanks for the video.
@@CameronsCandorOriginal you're welcome and yeah, just keep a funnel on an upper level and make sure that the thermostat is cycling correctly and you should be just fine.Check thermostat housing for a leader zurk, or if there's any desserks anywhere in the line
I am considering cleaning the EGR myself, but I am a bit afraid; however, your video has increased my confidence to do it. I wish you were in California; I would go to your shop without hesitation. Thank you so much for taking the time to make the video and explaining it very clearly; I appreciate the fact that you go straight to the source and the purpose of your videos and do not waste your time or our time as viewers; thank you for teaching very well. If you have the EGR gasket kit part number, please let me know, I would appreciate it. Thank you.
No sweat and you're definitely welcome.. I do have the part numbers at work... what year is you're truck also?
@@herpabetic is a 2014 Isuzu NRR. Also; by any chance do you know of a scanner for the is Isuzu that I can purchase to perform a Force Regeneration? maybe one that you know it works for sure for the 2014 Isuzu, Amazon or eBay? Years ago I bought one but it won't let me perform a force regeneration, I really appreciate your help.
I use an upper end autel 906 I believe..about 2k but does everything.. cheaper than snap on but lots of similar capabilities
@alexandera412 ok I must have thrown away the boxes but I do have the old set of egr coolers with numbers on them..I use napa auto parts for most parts or if u call isuzu they will provide the part numbers. Have you're plate numbers and vin available to identify
@@herpabetic Thank you for all your help, my mechanic friend I did exactly the job you did, and it went well; we just had an issue with a bolt at the end of the engine where it attaches on the passenger side that broke; it took as a while a lot of drill bits to fix it; but in the end all worked out well. Thank you so much
Thank you so much! I have to do exactly this to mine. I’m only missing one valuable information…. The torque 😢
Yeah, I quit trying to give information can like that. Because it was a constant argument with random people i'm sorry
i have a 2009 im doing this on right now, can i use the old metal gaskets or do i need new ones and where can i find them? thanks for the vid.
Similar but I would definitely try to use new gasgets. And isuzu does sell a kit oem is usually the best for this application
Excuse me! How can I find you to do repairs? My car is exactly the same as the one you repaired in the video.
@张斌-n2r i am in the tacoma -Seattle area. Those trucks are not the easiest to work with
Washington
@@张斌-n2r okay I'll see what I can do I got covid about 3 days ago not sure how long it's going to be before I feel better the last few times I caught it it lasted about a week I am very buried in work I can try to schedule something with you
what did you soak them in?
Sorry about the late reply..this utube is sometimes hard to keep up with..but soaked them in parts cleaner for about 3 days then was able to blow them out with air..did use a plastic brush some...all worked great and truck is running great again..do need to test drive though..the second u think u won with these...failure...lol..all we can do is try..most has worked out pretty good though..scan tool is at better readings for now though
@@herpabetic Thank you. I got mine all cleaned.
我的车和你的车的型号一模一样、最近发动机有很奇怪的异响，
En español
A little habla Español
Volevo chiedere si era accesa la spia motore grazie