part 1: spider base. 0:00 - 18:27 part 2 spider top. ? part 3 spider arm. 18:28 - 42:15 part 4 battery 42:30 - 43:46 part 5 spinner 43:59 - 45:57 part 6 spacer 46:20 - 47:10 part 7 electrical connector 47:14 - 51:40 part 8 piller 51:43 - 54:40 part 9 fan 54:42 - 1:01:56 part 10 motor 1:02:00 - 1:11:02 part 11 distribution board 1:11:06 - 1:17:45 part 12 electrical units 1:17:50 - 1:22:26 part 13 electrical units 2 1:22:31 - 1:30:53 part 14 sub assembly electrical board 1:30:57 - part 15 final assembly - 2:07:28
Took me 4 hours to do it from start to finish. Really easy to follow, the real lesson is in the many techniques and shortcuts when actually using solid works and assembly construction.
part 1: spider base. part 2 spider top. part 3 spider arm. part 4 battery part 5 spinner part 6 spacer part 7 electrical connector part 8 piller part 9 fan part 10 motor part 11 distribution board part 12 electrical units part 13 electrical units 2 part 14 sub assembly electrical board part 15 final assembly
Thank you very much for this perfect tutorial . I really enjoyed following the video and desing the drone step by step . It is a woth help to my MSc thesis . 🌹🌹🌹
sir your tutorial is best but first off all you should keep the blue print of the object so that we can try first and if we have any doubt we can see this video
Cool tutorials, this isn't the first one from you I've watched... It's just weird that you don't fully define things... Also, there are some points that you could have 'made equal' or 'mid point' which would allow you to easily change dimensions in the future without the whole thing going haywire. Either way, good work! Thanks!
Hello, it is a wonderful tutorial i really like it and actually i want to ask you about the choice of dimension of each piece ,Do you have a reference ? or u have them ? or calculate them ? Thanks ^^
sir in the first step of making spider they are not going to extrude they need a fully define sketch while we dont have fully define .....sir how can i fix it?
Thank you for this interesting tutorial. Overall very good you use of features, in some parts such as the fan it wasn't accurate but it can do the job. Also , piller wasn't mated properly. but still very good work
For the 3rd part, at 40:38 I cant fillet. I think there are some part that you skipped, where you edit and twerk a little bit there, but it left a big impact towards my drawing as I follow your tutorial step by step :(
sir my quadcopter is not running well and last day i upen then is not show all parts and assemblies parts and is only show nuts and bolts what can i do please response anyone please suggest me.
In motion study i dont have a option motion analysis and when i'm animating it,the blade are rotating 6sec clockwise and 6sec anti clockwise.please help me out.Thank you.
Hello I have a problem with solidworks when ensambling I can not move the parts in order to select faces. For example I was trying to apply a width restriction to a ring I could select the front face but I could not select the back face because there is not menu to do it. What keys do I have to use? thank you
In assembly of ball bearing when making the mating process you selectb both inner Ring and Outer ring and applied "Width" mating, What I m trying to know is how you rotate the pieces in order to select the faces? I can not rotate and is a problem I have when trying to follow you assembly videos, I made all the pieces but if I have to rotate them I can only select one face. I try to right click menu as usual and there is not the options to make zoom or rotate and the other when skteching. Thank you so much
Olá. Em um Esboço 3D alguém sabe como fixar a ferramenta linha na direção desejada, eu sabia fazer, mas passei tempo sem usar o SOLID e acabei me esquecendo.
part 1: spider base. 0:00 - 18:27
part 2 spider top. ?
part 3 spider arm. 18:28 - 42:15
part 4 battery 42:30 - 43:46
part 5 spinner 43:59 - 45:57
part 6 spacer 46:20 - 47:10
part 7 electrical connector 47:14 - 51:40
part 8 piller 51:43 - 54:40
part 9 fan 54:42 - 1:01:56
part 10 motor 1:02:00 - 1:11:02
part 11 distribution board 1:11:06 - 1:17:45
part 12 electrical units 1:17:50 - 1:22:26
part 13 electrical units 2 1:22:31 - 1:30:53
part 14 sub assembly electrical board 1:30:57 -
part 15 final assembly - 2:07:28
Please watch the video once again.
For those wondering part 2 is at 14:18
Thanks for the time stamps
thankyou for making my life easy
Took me 4 hours to do it from start to finish. Really easy to follow, the real lesson is in the many techniques and shortcuts when actually using solid works and assembly construction.
I didn’t find it easy to follow at all
part 1: spider base.
part 2 spider top.
part 3 spider arm.
part 4 battery
part 5 spinner
part 6 spacer
part 7 electrical connector
part 8 piller
part 9 fan
part 10 motor
part 11 distribution board
part 12 electrical units
part 13 electrical units 2
part 14 sub assembly electrical board
part 15 final assembly
how can I get the drawing dimensions please?
thanks
Guys, please welcome to our channel to jump from beginner to expert level !!
Thank you. Really good tutorial. Never knew how to use solidworks before but completed the whole model.
Your tutorials are very good easy to follow and help a lot to add my skills in solidworks. Thanks for your time in putting this online.
I really appreciate the help. the steps are so easily taught that we can use it in any other projects. Thank You so much.
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Thank you very much for this perfect tutorial . I really enjoyed following the video and desing the drone step by step . It is a woth help to my MSc thesis .
🌹🌹🌹
I just finished it. Truly amazing. Thank you sir for your time. Thank you so much.
really good tutorial, help a struggling freshmore to startup building this drone. thanx!!!!!!!
just follow the video instructions you will achieve it sure Xiaomeng Wu
Thanks man.I'm going to improve in the Solidworks,thanks to you.
Thanks,
sir your tutorial is best but first off all you should keep the blue print of the object so that we can try first and if we have any doubt we can see this video
Thanks sir. this video is so easy to understand
yep, Thanks sir, it is precious for me, follow your tutorials
Trọng tđh Thanks,
You are the best
very gentle man
Very nice tutorial
So enlightening this video really boosted my
skills
gracias por tu tutorial, me fue de gran ayuda...❤
best channel,very good
sir, your rectangle at 50:05, is undefined. Is that a mistake? or on purpose?
Cool tutorials, this isn't the first one from you I've watched... It's just weird that you don't fully define things... Also, there are some points that you could have 'made equal' or 'mid point' which would allow you to easily change dimensions in the future without the whole thing going haywire. Either way, good work! Thanks!
HI SIR Thanks for your videos . upload 2d sketch diagram in this videos
This is really Amazing Lesson!! Thank you so much!!
sir,
can you give tutorial of hydraulic turbine equipment like, GUIDE VANE, NOZZLE TIP, TURBINE BLADE, CASING etc....
Awesome work!
So beautiful and interesting, and clever! thank you.
Very impressive design, but please can we have the full dimension on pdf. i would like to design it and see how to another one. Thanks for answering.
Lucid Language, simple steps.....
Sir can please demonstrate a SCARA Robot
i will try,
sir,
your tutorials are amazing
can you give any tutorial of helicopter ?
i will try,
Thanks mate one of the best tutorial :D
wow,i want to draw it now.thank you so much
Thanks i am sure you will enjoy.
wow great doing , can`t wait for more videos
You must share the dimensional drawing of the project as well.
So we can practice on our own
Hello, it is a wonderful tutorial i really like it and actually i want to ask you about the choice of dimension of each piece ,Do you have a reference ? or u have them ? or calculate them ? Thanks ^^
Finished!! Thanks very nice Dron :)
Thanks
Thanks, I'll do this for my project...
All the best,
sir in the first step of making spider they are not going to extrude they need a fully define sketch while we dont have fully define .....sir how can i fix it?
Super
Thank you sir..
Hi can you please design Mistral Xherpa drone with full guiding steps?
Thank you for this interesting tutorial. Overall very good you use of features, in some parts such as the fan it wasn't accurate but it can do the job. Also , piller wasn't mated properly. but still very good work
thanks,
nice work, I used this in my project. thank you
Nice video sir
Another fantastic job! Thank you!
thanks i hope you enjoyed.
Good work bro keep itup
Guruji, you are great!
Welcome, & all the best for the projects,
Thank you very much
I cant wait to draw it woww thx
very useful sir, nice tutorial
Manish Reddy thanks
thank you so so much
Thanks verrrrrry much
VERY GOOG!!!
Thanks,
Thanks a lot sir....
wow cool... that's very nice..
l'll try to draw it...💪
thanks i hope you enjoyed.
👍👍
Bravo👋👏👍
good evening, I would like this project in professional INVENTOR :(
I did it Mann!!
I LIKE IT!
Thanks,
For the 3rd part, at 40:38 I cant fillet. I think there are some part that you skipped, where you edit and twerk a little bit there, but it left a big impact towards my drawing as I follow your tutorial step by step :(
sir my quadcopter is not running well and last day i upen then is not show all parts and assemblies parts and is only show nuts and bolts what can i do please response anyone please suggest me.
thanks that is very nice
thanks i hope you enjoyed.
Hi, your tutorials are amazing. Would you share your files with us.
Hi sir, I'm doing exactly what you're doing but I don't getting the same fillet as you're having at 40:30. Can you help me?
thanks sir.. hope i can do it in CREO .
In motion study i dont have a option motion analysis and when i'm animating it,the blade are rotating 6sec clockwise and 6sec anti clockwise.please help me out.Thank you.
in Animation mode also you can give motion, you can increase 6 to infinite seconds, just drag the assembly cursor to requires seconds. & recalculate.
Sir, I need this CAD model file for a project, can you please share it with us ?
Thank you very much for this video. But I have questions, how can you attach the spinner and the motor? What are four holes of the spinner used for?
Đặng Công Bùi hi, this is not accurate & complete design, still it need to many corrections,
Ah I see. Still a great video though. Thank you very much
I want this drawing with dimensions
Hi, great video I am learning from them. but how do you remember the dimensions do you pre-design in Cad and then create a 3d model?
i can't remember all dimensions, pre design & make the tutorial,
Sir please make video on how to design drone on autocad
i have future plan for Autocad tutorials,
How to make cylindrical Cam and set with Cam follower
what kind of things that I am going to learn in joining by monthly subscription
I have 2016 version .but .surface and sheet metal option is not there ......like there is a sketch option......what to do? ....please reply !!
hi, this is great, i like it very much. did you print it and added the electric system??
Buen Trabajo ;) eres un Crack
merci beaucoup !!! quel boulot
thanks i hope you enjoyed.
Thank you very much for this video, but can i find the sketchs of this project.? where ...
again Thanks
Thanks a lot.
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
thanx for it
How can i get the dimensions of the parts i want to practice myself first. if anyone have that in pdf format share the link.
Copy from the video.
Can I do the same in Solid Edge ??
Hi, Why can't I insert hex nuts? the nuts just wont come out after draging and if I click ok on the box, all my assembly file turns red. help please
THANKS MAN
Hi, do you have the drawings/illustrations for the drone?
Motion analysis is not in my solidworks ?? How can i do motion
can you please provide the 2d drawing with dimensions for this projects. it is better to understand if we get the 2d drawing with dimensions.
Hello I have a problem with solidworks when ensambling I can not move the parts in order to select faces. For example I was trying to apply a width restriction to a ring I could select the front face but I could not select the back face because there is not menu to do it. What keys do I have to use? thank you
width mate you can apply only flat surfaces it will not work on circular or angular faces all the selected faces should be in one axis.
In assembly of ball bearing when making the mating process you selectb both inner Ring and Outer ring and applied "Width" mating, What I m trying to know is how you rotate the pieces in order to select the faces? I can not rotate and is a problem I have when trying to follow you assembly videos, I made all the pieces but if I have to rotate them I can only select one face. I try to right click menu as usual and there is not the options to make zoom or rotate and the other when skteching. Thank you so much
Thanks 🙏🏻
Hey, can you do a drop test on it?
fantastic ..
thank you.
Thanks,
how much specifications needed for this animation?
guys which version of solid works is this
hi, can i do it in solid edge?
How many parts is this project??
Olá. Em um Esboço 3D alguém sabe como fixar a ferramenta linha na direção desejada, eu sabia fazer, mas passei tempo sem usar o SOLID e acabei me esquecendo.
thank you
Watch ancient aliens 9/11c on History Tv every weekend
thanks