@@nhalam2037 At present, manual calibration can help you to improve the brightness or color difference. It is more helpful for products of the same model and the same batch. But for different products or different manufacturers, even with professional calibration equipment, it is impossible to make them completely consistent, because the wavelength and visual angle of the lamp beads cannot be changed. I hope my reply can help you.
Hi Sam, Can I take one cabinet as a reference and send their informations to the other ones ? I got multiple cabinets to calibrate and not much time to do it Thx for your great video
@@samzhou8510 Hello, if there are two batches of cabinets of the same model, but all the cabinets in the second batch have a different shade from the cabinets from the first batch, can I, having calibrated one cabinet from the second batch, send the calibration data to the rest of the cabinets from the second batch?
Hello, thanks for the setup info. If you know how to increase the display area on the novastar msd600 board. Not a small corner from the top left, but a full screen.
MSD600 no have video processor function. i think you said it's scale function. but MSD600 just a sender. you can creat a windows. and that window the resolution same with screen. so it(video or picture) can be full display on screen. or used extend mode. make MSD in second monitor . and setting MSD600 resolution same with screen.
Thank you for the valuable information you have provided. Is this problem related to the receiving card? Although very rare, this kind of problem has happened to us several times. It disappeared after replacing the buyer card. But we couldn't understand why it suddenly appeared. I don't know if it is related to receiver board failure. Is it possible to repair the card if it is related to the card?
Most of the time, if this problem occurs during use, it may be because the firmware of the receiving card is inconsistent, some receiving cards are not controlled when adjusting the brightness, or you can try to turn off the correction function. Sometimes the correction factor affects this phenomenon
HELP ME please i have done something wrong and my entire screen displays only red color, same on the test without rj45 conected, nothing blue, nothing green
You should have set the pre-stored screen, and the pre-stored screen is just a red color, so the situation you mentioned occurs. You just need to turn off this function. The specific setting is in the settings of the Nova LCT software, pre-stored screen, select None and save it.
@@samzhou8510 Hi, I would like to know how I can put the screen in of the LED with the red, green and others color of adjustment, because the color stay just in my laptop, so the colors are in the same tone. Even so, I thanks for lesson. Great help was the video for me!
@@FranciscoSousaRebuscardesign when you copy the operation like me . you will see your screen show the pure color. and have some change when you setting in software. the only think maybe you need setting the send card in maSousaRebuscardesign when you copy the operation like me . you will see your screen show the pure color. and have some change when you setting in software. the only think maybe you need setting the send card in extend mode or primary mode.
Some modules have built-in lamp board FLASH, which will store the brightness parameter value and correction coefficient of each lamp bead, which can be read and used by software. The premise is that the display manufacturer must do point-to-point calibration and store the data in In the module FLASH, if the module itself is relatively low-end and does not have this function, it is necessary to re-calibrate the display;
Hola, muy buenas! Podéis hacer un vídeo traducido al español? O alguien sabe de algún vídeo de calibración para tarjetas novastar en español! Saludos Cordiales
Today I have learned this type of setting for the first time. Thank you so much for learning
🙂
I can't color correct the indoor and outdoor led screen so is there anything else I hope you can help me with. thank you!

@@nhalam2037 At present, manual calibration can help you to improve the brightness or color difference. It is more helpful for products of the same model and the same batch. But for different products or different manufacturers, even with professional calibration equipment, it is impossible to make them completely consistent, because the wavelength and visual angle of the lamp beads cannot be changed. I hope my reply can help you.
@@samzhou8510 thank you for your reply your videos are awesome thank you for that. Wishing you a lot of health and success in life!

Hi
Gracias por la informacion ... estaba con el problema ahora ya se como solucionar ... saludos
How do you move the color window??
Excelente explicación, muchas gracias.
hi how would i go out of a free view box into a novastar
If use 1no.different drive IC module in a cabinet then how to do configuration
hi the screen is not clear together with the image what will i adjust..
Do you have to do this everytime? Or just one time?
Hi Sam,
Can I take one cabinet as a reference and send their informations to the other ones ? I got multiple cabinets to calibrate and not much time to do it
Thx for your great video
you mean calibration coefficient ? if the data is just for a cabinet, you can't sned it to other cabinet. because it will be make it wortse。
@@samzhou8510 Hello, if there are two batches of cabinets of the same model, but all the cabinets in the second batch have a different shade from the cabinets from the first batch, can I, having calibrated one cabinet from the second batch, send the calibration data to the rest of the cabinets from the second batch?
@@hmzauze yes. That is available .
Hello! Is it possible to calibrate only using novalct without a camera?
@@vqdimefimov yes. That calibration is by manually. No have camera.
Hello, thanks for the setup info. If you know how to increase the display area on the novastar msd600 board. Not a small corner from the top left, but a full screen.
MSD600 no have video processor function. i think you said it's scale function. but MSD600 just a sender. you can creat a windows. and that window the resolution same with screen. so it(video or picture) can be full display on screen. or used extend mode. make MSD in second monitor . and setting MSD600 resolution same with screen.
Consegue fazer no sistema linsn ?
Hello, do thé problèm disappear if we change thé cabinet ?
funciona para pantallas de lotes diferentes???
Creo que sí
Hi, you use what camera and lense for calibrate? And what are the best camera and lense for calibrate?
cv laris cipta sejahtera that is manually calibration. No need camera and lense
Can anyone help me with the nova star with SMP6Pro showing no hardware
Thank you for the valuable information you have provided. Is this problem related to the receiving card? Although very rare, this kind of problem has happened to us several times. It disappeared after replacing the buyer card. But we couldn't understand why it suddenly appeared. I don't know if it is related to receiver board failure. Is it possible to repair the card if it is related to the card?
Most of the time, if this problem occurs during use, it may be because the firmware of the receiving card is inconsistent, some receiving cards are not controlled when adjusting the brightness, or you can try to turn off the correction function. Sometimes the correction factor affects this phenomenon
Hi SAM
for Manually Calibration what things we need to have with us ' I mean Camera or anything we need ......
Camera and key dogs . Key dog from novastar or other control system company. Depend what’s control system you used.
hi, thanks for info. you know linsn led software set this function ?
linsn also can be ok, but it's different operation;
Como faz no sisitema linsn ?@@samzhou8510
Same color problem, my brother huidu A5 card Settings available
@@smdscreensign5193 I didn’t used huidu many times. So I can’t give you suggestions
Trying to do this but not seeing the pattern on the screen
check you screen with your monitor is primary mode.
Hi Sam!!! How are you?! Thank you
HELP ME please i have done something wrong and my entire screen displays only red color, same on the test without rj45 conected, nothing blue, nothing green
You should have set the pre-stored screen, and the pre-stored screen is just a red color, so the situation you mentioned occurs. You just need to turn off this function. The specific setting is in the settings of the Nova LCT software, pre-stored screen, select None and save it.
@@samzhou8510 Hi, I would like to know how I can put the screen in of the LED with the red, green and others color of adjustment, because the color stay just in my laptop, so the colors are in the same tone. Even so, I thanks for lesson. Great help was the video for me!
@@FranciscoSousaRebuscardesign when you copy the operation like me . you will see your screen show the pure color. and have some change when you setting in software. the only think maybe you need setting the send card in maSousaRebuscardesign when you copy the operation like me . you will see your screen show the pure color. and have some change when you setting in software. the only think maybe you need setting the send card in extend mode or primary mode.
I have a probléme , ,,, the rectified coefficient of the reception card is not reasonable, please settel after having ,,
Some modules have built-in lamp board FLASH, which will store the brightness parameter value and correction coefficient of each lamp bead, which can be read and used by software. The premise is that the display manufacturer must do point-to-point calibration and store the data in In the module FLASH, if the module itself is relatively low-end and does not have this function, it is necessary to re-calibrate the display;
thank you for Réponse
How to rotate the module?
Pull the module out and rotate manually
@@PROSLV 🤣i think he is ask how to rotate the module display(rotate image display).
Thank you!
Hola, muy buenas!
Podéis hacer un vídeo traducido al español?
O alguien sabe de algún vídeo de calibración para tarjetas novastar en español!
Saludos Cordiales
Es posible que no pueda responder a esta pregunta porque no hablo español;
Nice tks
Can you please help me
？？？
I need rcfg file
Hi
@@samzhou8510 I need rcfg file
Hi
Hi
Thank you!!!
Hi
Hi