Sounds just as good over there as they used to here in the States!! There is no sweeter music than a 2 cycle Detroit engine! Thanks so much for a great video!!
I love that engine, drove a Terex 30 ton off road dump truck with it, was stopped by the owner for speeding on the haul road, was the hydrostatic with 6 gears, I was making my way to fourth when he saw me, "I know it's fast and has a smooth ride, but slow it down," had to wait till he left to get it back up there.
Nice little vlatt up around the Coona industrial area and across the bottom wier crossing and onto Timor Road. Good to see that it's been raining and green, better than it was when I was there last.
What FUN . What memories . Super Truck from a Different Era . 5.3 litres . Sounded like 1000 bhp . They went very well . As a retired Professional Driver I have to comment , however , that the Driver kept his hand on the Shifter unnecessarily . This can and WILL wear the selector forks inside the transmission out very prematurely . Unless you intend to change a gear within say Two seconds time , hand SHOULD be on Knee . The Old Two Stroke Detroits are just such a GLORIOUS sounding thing . 6V53 best of all .
used to dyno the 6V53t silver series, with a supercharger and a turbo charger for the marine corps LAV these things are crazy we kept the whole camp up one night dynoing one. haha
One of the first diesels I drove was a International with a 6V53 Detroit Diesel with a 4X4 transmission ( 4 speed main box with a 4 speed brownie ) and you almost had to wear ear plugs to drive it.This was many many years ago.Later on I progressed to a 6V71 and it was just as noisy.
Right! Them 2 strokes just scream! A neighbor of mine has and old Oliver tractor with a two stoke in it, when he has it in the field. Just grab a lawn chair and a couple beers and enjoy!
the Glory days we will all remember will stay with us in our minds. blessed are those who are able to re live those days. and thanks for sharing good times in our troubled times in these last days. HP126.
@@kennymayse 6v53T/Spicer 3153c/ NP203-205 Doubler/ Dana S110 rear with 4.88/ Dana 80 front with Crane inner and outer knuckles with 4.88/ true trac in rear, detroit locker up front/ 8x6.5 to 10 lug adapters/ 20 inch hutchinson rims/ 365/85R20 xzl tires (44 inch). At 70 mph is roughly 2000 rpms which is the sweet spot for HP TQ and MPG
Put the 203 in low using the hi lo switch on my stick. The 205 is a twin stick with hi, lo, neutral on one and front engage on the other. Be amazed at what holes you can crawl out of while loaded down heavy.
I used to hate detroits back when I had to drive them all day long and they were plentiful. Now.............. I want one to cruise with. In a pickup or some type of rodded out smaller truck. The sound just brings me back. I love it.
Manorfarmdenton There was a 8V53 factory installed in a Diamond T back in the early seventies 247 hp at 2600 RPM. Also a couple a couple of retrofitted ones in a bonneted bogie drive Deutz used to haul a tri-axle fuel tanker. Big truck in it's time. There was one put in a cabover Leyland single drive with bogie trailer hauling fruit in cages went like a rocket and took 2 hours of the trip time within 500 ks compared to the original Leyland engine and most of it was done up Mt Victoria.
If I had this ride, I'd wake the teenagers up across the street who kept me awake to all hours of the night partying, and give them a little 0600 Detroit alarm clock. Gotta love it.
I love the mean and evil soundin' 6v53 in this video plus the jakes..these engines in trucks I think were set at 2300 rpm 1,600lbs of 318 cu. inch 2 cycle diesel even the over rev sound cool!!
aside from this example this engine was in my opinion very popular in the old International loadstars 1850 and the fleestars as well as old trash trucks and the old Chevrolet C-70 and yes older military vehicles
You aren't kidding. I have a 1969 Diamond Reo C10142 here in the States. The only other Diamond Reo parts I have ever seen were a static display truck in a museum, and the cab and radiator that were used for a rat rod. I cant get parts to keep the Gold Comet engine going, so its getting a Cummins.
@@matildastanford7019: You pass the comment about hearing it from 10 km away... Need to tell a story about an overnight mob that was a national carrier in the 1970's. Late mate was supervisor for this overnight company. Truck from Melbourne was late - very late! Big knob boss was prowling the docks, waiting to tear the interstate driver a new one. BKB goes into the supervisors' dock office and is growling at the supervisor... Supervisor throws his hand up. Depot was at Beare Avenue, Netley. "Hang on, he is pulling up at South Road!" The supervisor exclaims! BKB: "How the F*** do you know that?!?" Supervisor: "I can hear his 6V53!" This is about 2.5 km from the depot, in peak hour traffic. About 15 seconds later, supervisor hears him going up through the gears. "He'll be here in 5 minutes!" BKB: "Yeah, sure!" Not believing what he is hearing! 5 minutes later, the Melbourne truck rolls into the yard. BKB goes to tear the driver a new one, and the driver presents a timestamp from a Bundy clock, with the simple message to the BKB: "Tell Melbourne that they need to get me out by 8 P.M., not F***ing after midnight like they have this morning!!!" BKB walked away with tail between legs!
A lot of people say a harley Davidson is the most efficient way to convert fuel into noise. I wonder if they have never heard of a 2 stroke detroit diesel.
A vintage RHD Diamond T? Don't see those often. I imagine they're even scarce down in Australia, since there aren't even that many of the LHD ones left here in the States.
Good old jimmy turning diesel fuel into noise. Must be hard for anyone who has never driven one to understand how cool these motors are. They sound like they are running a gazillion rpm. What did this one top out at in this video, maybe 2200?
michael jagger On the old mechanical engines yes the jake will actually choke the engine to the point of stopping but on the newer electronic engines it will work to a certain rpm then the computer will shut it off.
mautu ioapo screamin diamond t6v53 detroilt with jake brakes thonk you youtube videos in my loaptop compter goodday by now mautu ioapo thonk you 7.11.2014
Hate to admit this a bunch of groan men ...but when i an old Detroit screaming like that. I get a little moist and sometimes i think i feel something move.. you know.. down there... work for heavy equipment dealer 35 years cranes. Loaders compessors big liftrucks etc.
Geez... don't hold back! Tell us how you REALLY feel. Maybe those that can't discern a note of sarcasm should be added to the "stupid" list... OOOPS! That's You!!
No worries. I think we all know it was Australia. I was just making one of those jokes about the wrong side of the road because they do it to us and we do it to them. It's all good. Cheers
Lalnable Hector lucky you, If I had one of those beasts, I would drive it like I don't care about emissions or noise (the reason why Detroit stopped making them)
Sounds just as good over there as they used to here in the States!! There is no sweeter music than a 2 cycle Detroit engine! Thanks so much for a great video!!
I love that engine, drove a Terex 30 ton off road dump truck with it, was stopped by the owner for speeding on the haul road, was the hydrostatic with 6 gears, I was making my way to fourth when he saw me, "I know it's fast and has a smooth ride, but slow it down," had to wait till he left to get it back up there.
My uncle used to drive one of those puppies back in the 70 and I loved to ride with him. It's like music to my ears.
Detroit Diesel.... when 20 mpg sounds like ur doing 200.... I LOVE it!!!
Nice little vlatt up around the Coona industrial area and across the bottom wier crossing and onto Timor Road.
Good to see that it's been raining and green, better than it was when I was there last.
What FUN . What memories . Super Truck from a Different Era . 5.3 litres . Sounded like 1000 bhp . They went very well .
As a retired Professional Driver I have to comment , however , that the Driver kept his hand on the Shifter unnecessarily .
This can and WILL wear the selector forks inside the transmission out very prematurely .
Unless you intend to change a gear within say Two seconds time , hand SHOULD be on Knee .
The Old Two Stroke Detroits are just such a GLORIOUS sounding thing . 6V53 best of all .
used to dyno the 6V53t silver series, with a supercharger and a turbo charger for the marine corps LAV these things are crazy we kept the whole camp up one night dynoing one. haha
Mr Sunshines you’re a moron
Mr Sunshines turbo charger is driven by exhaust gas pressure super charger is run off of the engine
every time a old 2 stroke Detroit starts an angle gets their wings
Angel?
@@Larsanator It's angle grinder. An angle grinder gets it's wings.
An angle gets its rays
@@airspoon94no smoke
One of the first diesels I drove was a International with a 6V53 Detroit Diesel with a 4X4 transmission ( 4 speed main box with a 4 speed brownie ) and you almost had to wear ear plugs to drive it.This was many many years ago.Later on I progressed to a 6V71 and it was just as noisy.
I do love the sounds of 2 stroke Detroit Diesel engines!
When 1500 RPMs sounds like 8000!
Right! Them 2 strokes just scream! A neighbor of mine has and old Oliver tractor with a two stoke in it, when he has it in the field. Just grab a lawn chair and a couple beers and enjoy!
91slownotch I've only seen one of those, and I thought it was a custom build. Any idea what model Oliver it is?
they run twice as fast as a 4 stroke
Michael Jagger No, they fire twice as often. They only SOUND fast...shift points are still 22-2400 rpm.
actually 2900
that is the best sounding detroit ever, im in love!
I dig that "overgrown Porsche" sound! Like a giant diesel saxophone!
lol iv got this babby too as a fave and the throat singing maby we have a lot in common?
if you like diesel stuff AND overtone singing, then yes, we are both mutants, and we should be proud to be mutants.
Love it, remember all the good old trucks, screamin detroits and quad boxes.
Best sound on earth mate..
Fantastic sound, thanks for uploading mate. Hello from the UK.
Mate that sound and view brings back memories .. thanks so much for posting .. Cheers
the Glory days we will all remember will stay with us in our minds. blessed are those who are able to re live those days. and thanks for sharing good times in our troubled times in these last days. HP126.
5.2 liter V6 with attitude. It's fuel efficient in a 1 ton 4x4. Love pissing off my neighbors
What's your setup? Collecting parts to put together a 1 ton.
@@kennymayse 6v53T/Spicer 3153c/ NP203-205 Doubler/ Dana S110 rear with 4.88/ Dana 80 front with Crane inner and outer knuckles with 4.88/ true trac in rear, detroit locker up front/ 8x6.5 to 10 lug adapters/ 20 inch hutchinson rims/ 365/85R20 xzl tires (44 inch). At 70 mph is roughly 2000 rpms which is the sweet spot for HP TQ and MPG
Put the 203 in low using the hi lo switch on my stick. The 205 is a twin stick with hi, lo, neutral on one and front engage on the other. Be amazed at what holes you can crawl out of while loaded down heavy.
I used to hate detroits back when I had to drive them all day long and they were plentiful. Now.............. I want one to cruise with. In a pickup or some type of rodded out smaller truck. The sound just brings me back. I love it.
brings back memories of driving 318's and silver 92's.
I think thats why I'm partially deaf now.....lol.
Great vid!
Such an awesome sounding truck!
Beautifull sound 😍😍😍
Diamond T and Detroit 2-stroke - about as good as it gets...............
Manorfarmdenton There was a 8V53 factory installed in a Diamond T back in the early seventies 247 hp at 2600 RPM. Also a couple a couple of retrofitted ones in a bonneted bogie drive Deutz used to haul a tri-axle fuel tanker. Big truck in it's time. There was one put in a cabover Leyland single drive with bogie trailer hauling fruit in cages went like a rocket and took 2 hours of the trip time within 500 ks compared to the original Leyland engine and most of it was done up Mt Victoria.
what an awesome tune. mean as. thank you
Great truck. Drove up that road today :)
I just love this truck. Man that 53 series pulls good. Sounds just fucking great mate. Much love for this truck from British Columbia, Canada.
Everything from you name to the profile pic to the comment is truly canadian hahaha, gotta love TPB.
Awesomeman1987 LOL,funny thing is, this is how I really talk.
Love that steering wheel Knighty, very flash.
Music to my ears, great vid. :)
ahhhh i could sleep this music.
DETROIT = BEAUTY
thats the best sound on this planet !!!! I would kill to own that truck ... nice !!!!
Needles to say the the hairs in my forearms are standing on end. HOLYOLD CROW BATMAN...!!!.
awesome sounds comin from it!
If I had this ride, I'd wake the teenagers up across the street who kept me awake to all hours of the night partying, and give them a little 0600 Detroit alarm clock. Gotta love it.
love the sound I have had a few 453's-----had to get rid of then noise killing-so I went to 4bt cummins--god video
Love these old bird scarers
Bird scarer's are 903's👍
I love the mean and evil soundin' 6v53 in this video plus the jakes..these engines in trucks I think were set at 2300 rpm 1,600lbs of 318 cu. inch 2 cycle diesel even the over rev sound cool!!
Darnell o. Adams I. like the sound the Jake brake makes when the slow down it sounds like a pit bull barking .
No 3,00 rpm is max
Its missin one thing...STRAIGHT PIPES! but it still sounds very sick even the way its set up now.
Right hand drive lefty shifting! Nice us americans are f....ing crazy I would drive it what a beauty!!!
aside from this example this engine was in my opinion very popular in the old International loadstars 1850 and the fleestars as well as old trash trucks and the old Chevrolet C-70 and yes older military vehicles
You aren't kidding. I have a 1969 Diamond Reo C10142 here in the States. The only other Diamond Reo parts I have ever seen were a static display truck in a museum, and the cab and radiator that were used for a rat rod. I cant get parts to keep the Gold Comet engine going, so its getting a Cummins.
Is this in Australia? Nice sound!! Love that scramin' jimmy! 😊😊😊
Yep around Coonabarabran NSW.
Can hear it coming from 10 kms away! Lol
@@matildastanford7019
Yeah!! The detroit power!! 😍😍😍
@@matildastanford7019: You pass the comment about hearing it from 10 km away... Need to tell a story about an overnight mob that was a national carrier in the 1970's. Late mate was supervisor for this overnight company. Truck from Melbourne was late - very late! Big knob boss was prowling the docks, waiting to tear the interstate driver a new one. BKB goes into the supervisors' dock office and is growling at the supervisor... Supervisor throws his hand up. Depot was at Beare Avenue, Netley. "Hang on, he is pulling up at South Road!" The supervisor exclaims! BKB: "How the F*** do you know that?!?" Supervisor: "I can hear his 6V53!" This is about 2.5 km from the depot, in peak hour traffic. About 15 seconds later, supervisor hears him going up through the gears. "He'll be here in 5 minutes!" BKB: "Yeah, sure!" Not believing what he is hearing! 5 minutes later, the Melbourne truck rolls into the yard. BKB goes to tear the driver a new one, and the driver presents a timestamp from a Bundy clock, with the simple message to the BKB: "Tell Melbourne that they need to get me out by 8 P.M., not F***ing after midnight like they have this morning!!!" BKB walked away with tail between legs!
the sound in this engine is like engine detroit 6v92
5:00 Damn this sounds neat!
I am diggin' the shift pattern sticker on the dash... lmfao
Glorious
That sumbytch would make a def man scream ..... awesome.
I'd really like to see the rest of the truck! Have any video's of it?
Ah fuck... Now I gotta find a set of 53 series Jakes for mine!
In Canada! We have all kinds of them at the shop!!
Yes they are !!!
so bad ass!
A lot of people say a harley Davidson is the most efficient way to convert fuel into noise.
I wonder if they have never heard of a 2 stroke detroit diesel.
A vintage RHD Diamond T? Don't see those often. I imagine they're even scarce down in Australia, since there aren't even that many of the LHD ones left here in the States.
Mmm I'm Lovin' It
Let 'er RIP, Knighty!!!!
Sounds like the same motor used in city buses back in the day.
Because IT IS 👍👌
SNOORKLING !
HOW DID U MAKE UR DETROIT V6 53 SOUND LIKE THAT IT SOUNS AMAZING
i would love to see some footage of a drive by of this truck just to hear the exhurst note it puts out
Great stuff .. Loud now LOL
you gotta drive em like you hate em
Good old jimmy turning diesel fuel into noise. Must be hard for anyone who has never driven one to understand how cool these motors are. They sound like they are running a gazillion rpm. What did this one top out at in this video, maybe 2200?
AL M 2600RPM is standard rating
where can i buy that engine??? Im from Panama and i love how thats engine sounds
SWEET!!! are you one of the guys we sold 53 Jakes to last year? (Ontario Canada)
thats my kinda heavy metal
+Peter Tredo same ahahah
listen to that whoo love the sound of the jake brake haha jeez am i sad or what?
If you're sad, so am I, Matty. It's an awesome sound.
lol yeh man i loved my dads old grubber it wuld make the coolest sound using the jake,lol its nice
i was in new zealand and my ex wuld moan at the fact id wait at the bottom of a vally and listen to the straight 8 pipes jaking it wow!cool stufs
Yeah it is...
damn this is in Europe. So they exported Diamond T’s? Noisy little motor on that T. Lets go to 8V92 instead!
Must be tough with steering wheel on wrong side.
"new Jacobs brakes installed " as if you installed them on the axles or something over the weekend. Cool video nonetheless. thanks
H E L L Y E A H
You're on the wrong side of the road! LOL
Ever heard of the fact that in Australia we drive on the LEFT unlike America.
With the "LOL", you should have realized that I was being sarcastic.
Scott Bechler Dunno about where you live but i have never met anyone who said LOL when they were being sarcastic...
@@scottbechler9975 I think he suffered a catastrophic sense of humor failure, rest of us got it.
Where in NSW is this, Forbes?
This is what angry sex sounds like!
How isnt it a jacobs brake?
i thought the jake brake kicked in when you braked
+Michael Jagger the Jake Brake and engine brakes all work whenever you come off the accelerator and doesn't have anything to do with the brake system.
+Terry Stoner can you use the jake brake to the point when an engine cuts out?
michael jagger On the old mechanical engines yes the jake will actually choke the engine to the point of stopping but on the newer electronic engines it will work to a certain rpm then the computer will shut it off.
What trans and gears are you running?
What year is your truck?
sounds like a 8v71 318 hp. but you say its a 238 detroit??
It's 6V53, 318 cubic inches 210 hp👍
Shit lol I meant *mph, not mpg lol
mautu ioapo screamin diamond t6v53 detroilt with jake brakes thonk you youtube videos in my loaptop compter goodday by now mautu ioapo thonk you 7.11.2014
Hate to admit this a bunch of groan men ...but when i an old Detroit screaming like that. I get a little moist and sometimes i think i feel something move.. you know.. down there... work for heavy equipment dealer 35 years cranes. Loaders compessors big liftrucks etc.
Jacobs engine brake only 1.
Hey GM bring back the Detroit,, duramax what a joke
N/A or turbocharged?
Neither, all rootes type blower (Supercharger), a two stroke DIESEL requires pressurised air box to run.
Naturally aspirated , all 2 stroke diesels have a blower operating at barely above atmosphere 👍
We're is this Aussie?
Description says western NSW.
my 3 diesel mechanic buddy's tell me driver's who excessively use exhaust brakes are morons cause it causes all sorts of valve issues...Just saying...
I see what's wrong. He's driving on the wrong bloody side of the road and they put the steering wheel on the wrong side too.
Take it easy Francis, it was a joke.
Geez... don't hold back! Tell us how you REALLY feel. Maybe those that can't discern a note of sarcasm should be added to the "stupid" list... OOOPS! That's You!!
Well he did tell me not to hold back.
No worries. I think we all know it was Australia. I was just making one of those jokes about the wrong side of the road because they do it to us and we do it to them. It's all good. Cheers
The film's been put in back to front :)
318 no v653...
I realy don't think a 8v71 will fit under the hood of a Diamond t just way to narrow of a hood
They fitted them in some B model Macks
se save q todo a la izquierda es incomodo
Coonabarabran
its not jacobs brakeS
English country side is nice
+Straightwhite male except is not in England, this is Australia
+John H I think you mean better side
Ag 47 looks like 2 strokes are still legal there
Peter Kapica they are completely legal here.
Lalnable Hector lucky you, If I had one of those beasts, I would drive it like I don't care about emissions or noise (the reason why Detroit stopped making them)
German built and British made. Why aye.
Valor do caminhão caminhão valor
q estupides manejar de ese lado tan incomodo
your drivin on the wrong side of the road
Huh?, right hand drive.