That's a great little project. I need to modify my wood Avenger and cry that I still wanna get. One of your suppressars. First I hope your son gets better. I have a son without you some. That's 27 years old in when he gets a cough and laugh for weeks and weeks. And the medication always throws out. He's behaving medication. It looks like you got it handle. He seems to be doing so well god bless you
Thanks Guillermo, he's doing better but that cough comes and goes, I hope with the weather getting warmer he can finally get over it. I plan on doing another update video on this and my Notos bottle build in the coming weeks. My moderators are performing well, many positive reviews, I'm very happy with results. You and your family have a wonderful day
@@RedCornOutdoors im doing the bottle conversion using the same adapter as in your description, i put the white disk in before i put the fill probe in the adapter, -using a velver compressor it is SLOW filling up.I wasn't sure what to put in the hole first, - there was no instructions included. Their are no leaks - im using a .45 aluminum bottle. There is air going in the gun. pleaser advise
Sounds like you're doing well, the small green O-ring are for the fill probe if it ever goes bad. Yes only the white seal goes in, start putting air and slowly tighten foster fitting till it stops leaking. Sometime you may have to cock the rifle for it to start filling
What are the advantages of doing this mod , not being a smart allic just wondering . Cause id consider doing this on mine . Does it lighten the weight of the gun , course the avenger is pretty light anyways .
@@timmygilbert1371 Biggest advantage is increased shot count, especially if you plan on increasing pressure and adding a plenum. As far as weight with the aluminum bottle you are adding , unless you go carbon fiber. I currently sell my stuff on eBay and Etsy, I list it in my TH-cam bio
@@AM-hs4bz it just depends not every rifle acts the same, I had a recent customer request just a spacer because he was accuracy issues, removed the factory band and installed spacer just to fill gap on fill cap and was getting much better groups (JTS Aircuda Max). I've had better results with the band for me, helps keep everything straight and help eliminate any type of barrel whip. Hope this helps you out and thanks for messaging me
That's a great little project. I need to modify my wood Avenger and cry that I still wanna get.
One of your suppressars.
First I hope your son gets better. I have a son without you some. That's 27 years old in when he gets a cough and laugh for weeks and weeks. And the medication always throws out. He's behaving medication.
It looks like you got it handle. He seems to be doing so well god bless you
Thanks Guillermo, he's doing better but that cough comes and goes, I hope with the weather getting warmer he can finally get over it.
I plan on doing another update video on this and my Notos bottle build in the coming weeks. My moderators are performing well, many positive reviews, I'm very happy with results.
You and your family have a wonderful day
Nice to see you corn ! 👍
Great info !!
Just the video I’m looking for to upgrade my 1st gen Venturi to bottle. Thanks for posting
Your welcome, if I would do it again I would go for a bigger bottle .5L
@@RedCornOutdoors im doing the bottle conversion using the same adapter as in your description,
i put the white disk in before i put the fill probe in the adapter, -using a velver compressor it is SLOW
filling up.I wasn't sure what to put in the hole first, - there was no instructions included. Their are no leaks
- im using a .45 aluminum bottle. There is air going in the gun. pleaser advise
Sounds like you're doing well, the small green O-ring are for the fill probe if it ever goes bad.
Yes only the white seal goes in, start putting air and slowly tighten foster fitting till it stops leaking. Sometime you may have to cock the rifle for it to start filling
@@RedCornOutdoors OK Thank you for the quick response!
@@Ryder276 NP, glad I could help and have a great weekend
Nice. Don't think I've had a custom build yet that didn't leak on the first try lol.
Awesome family cant wait to get another one to do myself!
Awesome video Angel. Great job on the conversion brother!😊
Thanks Steven, hope all is well with you, have a great weekend
Great job
Sick brother, I like it
Thanks brother , I'll call you later
Thank you sir!
😉👍
The main reason not to use petroleum based lubes is it swells and breaks down rubber.
Hey squirrel what ya been up to my friend ?
Thanks
❤🎉
I was trying to figure out if I could make a small shed to shoot out off and keep sound down so I can shoot in my yard, any ideas
How can I make my break barrel Gamo quiet
Using a heavy pellet will help, I believe you reached out to me on another video,?
Some metric and standard cross over, 1/2" = 13mm 7/16 =11mm and some others. never can find either when needed LOL
It's like the 10mm always disappears, lol
What are the advantages of doing this mod , not being a smart allic just wondering . Cause id consider doing this on mine . Does it lighten the weight of the gun , course the avenger is pretty light anyways .
Also , do you sell the bottle band for this mod ? Thanks
@@timmygilbert1371 Biggest advantage is increased shot count, especially if you plan on increasing pressure and adding a plenum.
As far as weight with the aluminum bottle you are adding , unless you go carbon fiber.
I currently sell my stuff on eBay and Etsy, I list it in my TH-cam bio
@@timmygilbert1371 all good questions
@@RedCornOutdoors Thanks so much for the quick reply .
Does the accuracy change without the barrel holder ?
@@AM-hs4bz it just depends not every rifle acts the same, I had a recent customer request just a spacer because he was accuracy issues, removed the factory band and installed spacer just to fill gap on fill cap and was getting much better groups (JTS Aircuda Max).
I've had better results with the band for me, helps keep everything straight and help eliminate any type of barrel whip. Hope this helps you out and thanks for messaging me
@@RedCornOutdoors thank you so much for the help 👍🏻
Where did you get your stock
@@jdog6386 I 3D printed all my parts on this one, you can also check out the Milwaukee M22 build I did
@@jdog6386 was there a particular part you needed?