Oil filter cover has a 13mm plastic drain plug... Supposed to be drain before using the 32 mm socket to get filter out. Otherwise thumb up from me. I find it easier to use ramps under front wheels tho...
Great video , easy to follow step by step .I would recommend wearing a clear glass eye protection as debris can fall on your eye when removing the under tray and working on the engine when underneath the car.
If anyone looking at this to be able to change the oil and filter on the Alltrack, there’s a slight difference in what tools you need to remove the cover under the car. At least on my 2018 there were seven T25 (4 on left side and 3 on right side when looking at the car from the front) and instead of the T45 it’s seven 13mm bolts. Three in the back and two in each corner on the front. Still super easy to remove though. The rest is basically the same, and as others pointed out, use the 13mm drain plug before removing the filter.
Nice video but before you take it out the filter you should remove a small bolt near filter too drinkers all oil from the filter body and spillage will will be smaller😉🙂 Waiting for another helpful videos about Passat B8👍 Thanks and take care👍
No entiendo por qué utilizaron 2 medidas diferentes para tornillos de esa pieza de plástico...es decir, podían haber utilizado una diferente para cada uno de los tornillos. I don't undestand why they used two different sizes of torx bolts in that plastic cover piece...I mean, they could have easily used one different for each one of the bolts.
Great ! It helped me a lot. I'm just wondering what is the plug next to the oil filter that you need to detach? I was struggling to take it off and eventually made it. Maybe some kind of sensor...
ATTENTION: the 3 bolts holding the cover in the back are T45 and NOT T40!!! I own at 2015 Passat and didn‘t pay enough attention resulting in a stripped bolt und 1h additional work to get it out. Furthermore, always use stands, never let the car rest on a jack only - super dangerous!
I echo your comments about working on a car raised only by a jack. Very dangerous practice and should never be done. If the jack fails it becomes a giant press. I’ve seen cars resting on people before and it doesn’t look nice.
Hi. Really liked your video. Could you explain what do you mean by the last comment in the video, which says "On the indicator min to max oil level need 1 litre" ??? Thanks
Davor it means like he said! Znači od minuma do maximuma na šipci za mjeriti ulje je 1 litra. Ako je recimo ulja ima do pola na indikatoru šipke za mjerit ulje to znači da Vam fali za nadolijat 0.5 l ulja(iako niti to nije kritično, kritično je kad dođe do minimuma na šiki za ulje e tad treba jednu litru nalijat unutra.)
You made a big mess improperly removing the oil filter. You are supposed to drain the housing before unscrewing the filter housing. There is a small plastic bolt that you unscrew at the bottom in order to drain in properly. Thats also why you got two rubber seals in the package.
Kann man den Ölfilter wechseln ohne das Öl abzulassen oder kommt mir dann alles entgegen? Ich würde gerne eine Motorspülung mit einem neuen Filter durchführen. Vielen Dank.
I agree, bad design if you can’t lower it with the oil captive in the housing. And yes, there is a drain bolt but if it’s anything like my Passat, the plastic bolt is totally stripped and jammed.
Yes David 32 mil socket also try and get a filter removal tool in a motor factors as you may not always have a big socket like 32 mm ,he made a job look easy he is good for sure
Hello I have a passat B8 from the year 2017 179000km I did the oil change 9000km ago and today the OIL light comes on is it normal or is there a problem please?
What's the point of replacing the sump plug ? Its just a bolt ... I never replaced one for 8 oil changes on my golf ,12 oil changes on my seat and 3 oil changes on my passat... Never had a leak 😂 ... I know it's not dear but why change something that's ok
Oil filter cover has a 13mm plastic drain plug... Supposed to be drain before using the 32 mm socket to get filter out. Otherwise thumb up from me. I find it easier to use ramps under front wheels tho...
This is the most useful comment, thanks
Real men don’t use the drain plug. And gloves! 👍🏿😂
So that's what the other o-ring is for.
Came here to comment the exact same thing 😂
How much nm 13mm?
Great video , easy to follow step by step .I would recommend wearing a clear glass eye protection as debris can fall on your eye when removing the under tray and working on the engine when underneath the car.
This was the only decent video, I could find, thank you so much. We were looking for something like this
Perfect! 👏 Thank you so much, I can now change the oil by myself! Saved me tons of $$$ 🤗
If anyone looking at this to be able to change the oil and filter on the Alltrack, there’s a slight difference in what tools you need to remove the cover under the car. At least on my 2018 there were seven T25 (4 on left side and 3 on right side when looking at the car from the front) and instead of the T45 it’s seven 13mm bolts. Three in the back and two in each corner on the front. Still super easy to remove though. The rest is basically the same, and as others pointed out, use the 13mm drain plug before removing the filter.
hi, is it 13mm bolt with hex insert, or regular bolt, that you need a ratchedt/spanner for?
@@nikolatsirkov Im pretty sure those were just regular bolts
Nice video but before you take it out the filter you should remove a small bolt near filter too drinkers all oil from the filter body and spillage will will be smaller😉🙂 Waiting for another helpful videos about Passat B8👍 Thanks and take care👍
No entiendo por qué utilizaron 2 medidas diferentes para tornillos de esa pieza de plástico...es decir, podían haber utilizado una diferente para cada uno de los tornillos.
I don't undestand why they used two different sizes of torx bolts in that plastic cover piece...I mean, they could have easily used one different for each one of the bolts.
very good , great to see a good mechanic do an oil change,, great video many thanks
I miss my 2005 jetta TDI where was oil filter on the top of the engine, very easy to replace. Now I have to deal with this ...
Probaly the worst location to place a filter 🤦♂️
Really isn't try replacing an oil filter on a 2.0L 163 psa diesel on a Ford Galaxy what a location. No room at all.
Yeah I wish it was at the top. I hate jacking up the car and removing the plastics on my driveway
Absolute doddle of a job use ramps instead of axle stands 5litres of oil job done
Interesting the oil filter is underneath on the B8. It's on top in the B7 and really awkward to remove.
Great ! It helped me a lot. I'm just wondering what is the plug next to the oil filter that you need to detach? I was struggling to take it off and eventually made it. Maybe some kind of sensor...
You missed the 13mm to drain the oil filter before you dumped it everywhere. I'd add a funnel to your, "tools list" to avoid a mess up top also.
The video I was looking for. Many thanks Bro.
Would this method also apply to my Passat 22 Limited edition since within the B8 platform? Thanks.
ATTENTION: the 3 bolts holding the cover in the back are T45 and NOT T40!!! I own at 2015 Passat and didn‘t pay enough attention resulting in a stripped bolt und 1h additional work to get it out.
Furthermore, always use stands, never let the car rest on a jack only - super dangerous!
I echo your comments about working on a car raised only by a jack. Very dangerous practice and should never be done. If the jack fails it becomes a giant press. I’ve seen cars resting on people before and it doesn’t look nice.
Fantastic video, just what I was looking for. Thank you. 👍
How many liters go into Passat b8 tdi 2.0 150hk
5 liters?
👍👍👍 Editing on point
Very useful tutorial, thanks a lot!
Great video mate. Very helpful 👍
you know you can do the oil filter from the top too?
How?
Hi. Really liked your video. Could you explain what do you mean by the last comment in the video, which says "On the indicator min to max oil level need 1 litre" ???
Thanks
Davor it means like he said! Znači od minuma do maximuma na šipci za mjeriti ulje je 1 litra. Ako je recimo ulja ima do pola na indikatoru šipke za mjerit ulje to znači da Vam fali za nadolijat 0.5 l ulja(iako niti to nije kritično, kritično je kad dođe do minimuma na šiki za ulje e tad treba jednu litru nalijat unutra.)
is it ok if will be gastrol oli used? i saw this on the oil cap?
What is the screw at 2:44 for ? And does it need to be changed as well?
You made a big mess improperly removing the oil filter. You are supposed to drain the housing before unscrewing the filter housing. There is a small plastic bolt that you unscrew at the bottom in order to drain in properly. Thats also why you got two rubber seals in the package.
Thanks for this video
Good job !
This is the engine oil change, am i correct in thinking the DSG oil change is also best to do from underneath car?
Yes, DSG oil needs to be changed on the underside of the car. I will change DSG oil soon. I'll be patient to make a video.
Stupid new cars, why is oil filter there?
You are already on the bottom of the car to remove the plug and drain the oil, isn't this convenient to also in same time remove the filter?
@@mr.z2618 No
NIEMALS(!!) unter einem hydraulischen Wagenheber arbeiten. Da ist noch eine Ablassschraube im Ölfiltergäuse, dann gibt es nicht so eine Ferkelei...
Kann man den Ölfilter wechseln ohne das Öl abzulassen oder kommt mir dann alles entgegen?
Ich würde gerne eine Motorspülung mit einem neuen Filter durchführen. Vielen Dank.
Wow, that oil filter upside down position is just horrendous!!
I agree, bad design if you can’t lower it with the oil captive in the housing. And yes, there is a drain bolt but if it’s anything like my Passat, the plastic bolt is totally stripped and jammed.
Where do I buy the oil from. And drain plug?
What tool did you use to remove the filter housing. 32mm hexagon? I made a big mistake and couldn’t get the housing off. Do you have a link.?
Yes David 32 mil socket also try and get a filter removal tool in a motor factors as you may not always have a big socket like 32 mm ,he made a job look easy he is good for sure
@@johnnoonan5802 thanks, I got an 32mm hex Impact socket especially for this job and I got sorted.
Very useful, thanks.
Ist gut verstendlich, auser das zurücksetzung im Display war nicht verstendlich.
Mein Mann versteht nichts von den Autos, ich werde dieses Video zeigen und es in die Garage schicken. Danke
:)
Hello, 2.0 tdi 150cv ??
What a stupid oil filter location design
what is the connector with grey tab at 2:30? how is it removed?
I've managed to spill less oil when removed filter ;)
:) Cool
I did it 🤓 THANK YOU👍
Hello I have a passat B8 from the year 2017 179000km I did the oil change 9000km ago and today the OIL light comes on is it normal or is there a problem please?
what engine?
@@carchill7211 1.6l 120cv
@@hich95100 not good, your car either consumes oil or you did not reset the service interval correctly
Same here . They like to consuming oil . Especially if you do many short trips .
Is this the US or the european model?
Mashallah
Și garnitura aceea mică de ce nu o schimbă. E cadou pentru inelar?
Bucurate ca a schimbat-o pe cea mare ca pe cealaltă o da ca cadou nevestei în caz ca a uitat de ziua ei
Torx isn´t T40 but it is TX45
Thanks 👍
💪✊👏
Is it dangerous
When you check oil level you need to have car in horizontal position,not the front end in the air!Oil level in that position can't be good......
I was thinking that too?
What a stupid place to put filter,on my (tsi) petrol,the filter is on top...i use a topsider extractor. Job done in 15 min.
Wouldn't let this guy near my car, so many things he done wrong
I don't change anything just top up.
always wear gloves mate toxic stuff that old oil
What's the point of replacing the sump plug ? Its just a bolt ... I never replaced one for 8 oil changes on my golf ,12 oil changes on my seat and 3 oil changes on my passat... Never had a leak 😂 ... I know it's not dear but why change something that's ok
non t40…. T45
德國製造 Made in germany ;)
Mama Mia! Why do you do it so difficult and strange way? It’s very simple. Wag engineers not so stupid 😲😀
So hebt man kein auto an !
why do you use that overpriced VAG oil? You can go for 5W30 oder 0W30 Castrol/Shell and save a lot of money ;)
Maybe that was what the customer wanted?
Musisz się jeszcze wiele nauczyć.
Ok vídeo, but you are Mess !!!
Oil spill all around your work area and so on , anyway at least you change the oil
we have 2020 and a car from 2018 and there are still idiots who do oil chance lying under the car :D
You can drive to an official VW service and perform maintenance with special tools. This is a guide on how to do it at home.
So you have a lifting platform at home? Or how would you do it else than lying underneath the car when doing it at home...