Thanks! It worked for me. I put electrical tape over the old speaker case to keep the new speaker from shorting out. It's been years since my truck's dash has made any sound.
Thanks for this video vlad! My speaker went bad and this fixed it. Was super easy. Only one thing that I'd add is my old speaker had a metal screen on it that i had to yank off with needle nose pliers. with the screen on it it was shorting out the connectors on the new speaker.
Thank you- recommendation for doing this is use the smallest gauge wire possibly. 16g is too large and pulls too much current. I used 20g speaker wire an it worked perfectly. Wire should be similar to the thickness of a paperclip for this to work properly. Otherwise the orange display will flicker an speaker will not work. Ty for the easy fix.
Buen video, mi camión tiene el problema que marca el tanque frontal de aire más precion que el trasero, sabes si se cambia algún sensor del tablero Gracias
hi. Sir I have one problem ...volvo fh model 2007 RPM meter not working properly some time .....what is the problem. ...? I watched u r video I loved it so thank u.....
Very good video, thank you . I learned to much. But i have a cuestión, is necesario with the messure un ohms is 1K, if the messure is less what can i do ? The did clicks with the 9 V batey. Thank.
Excelente video, aprendí muchísimo, yo hice la prueba con la batería de 9V , y el parlante hizo clic, medi la salida en ohmios y solo tengo 15.6 ,cuando deben ser 1K ohms, que puedo hace en este caso?
Thanks a lot for your advice and video sir . From where we can buy this small speaker? I know online but can i buy somewhere from my city who carry speakers like that. ?
The Hoss not sure, but 8 ohms seems to be correct. If you put 4 ohms it might overload the amplifier but 16 ohm will be to quit. Hope that helps. Thanks
Worked like a dream, I was going to cut the at least one of the contacts to prevent excess resistance, but when I removed the back cover my speaker had a metal screen on it, I decided to remove it and under was the junk speaker cone and coil came with it, so problem solved. As all that remained was the original magnet.
Hey bro my abs is keeps coming on u know how to bypass I tried everything like short wire from from front to back and change abs sensor but still light in dash stays on any idea about that reply me or leave a reply here thanks
Thanks for the vid. I need to fix my buzzer and this is going to help alot. If you dont mind me asking, where did you get the new speaker from? Tia! Keep them coming!
I replaced the speaker and still nothing. When i use my multimeter on the speaker it shows0.005 and i know its working it is brand new speaker, but on the from brackets right under the solded area it shows 1.100. What could be the issue ?
Meho ima u RadioShack samo traziš mini speaker. Ja sam isto ovako uradio i radi ako je do zvučnika a 99% je do njega ako sve ostalo radi kako treba na desh tabli.
THANK YOU SOO MUCH. Volvo told me I had to replace he whole dash cluster for $1200. You just saved my pockets..
Thanks a ton man!!! I watched your video and fixed my truck. God bless you and your family
Many thanks it was really helpful it saved me $1200 to buy a new cluster.
Thanks! It worked for me. I put electrical tape over the old speaker case to keep the new speaker from shorting out. It's been years since my truck's dash has made any sound.
Thanks for this video vlad! My speaker went bad and this fixed it. Was super easy. Only one thing that I'd add is my old speaker had a metal screen on it that i had to yank off with needle nose pliers. with the screen on it it was shorting out the connectors on the new speaker.
I did mine today and it worked perfectly. Thank you for the video.
That's great! Glad it worked.
thank you for your help, volvo told me to change the cluster $1500 or so for a small speaker.. crazy .
+jamal Mr Changing the cluster is a Pricey fix for a little buzzer. Glad it helped you out.
Fuckin Volvo is evil.120 for the hinge for the sleeper side door.Just a small piece of metal.
Where did you purchase the speaker
Trying this out tomorow I just got my speaker in
@@rudyalvarez8339 where did you get speaker?
From another Vlad. Thank you very much Vlad. All the best.
Brother trucker you are a saint. Thank you. 👍
Thanks buddy it will be very helpful to me I got question does this speaker got the power through fuse or not ?
Where did yo get your dash switches. There bad Ass. Would like to get some.
Thank you. Respect from Russia.
Thank you- recommendation for doing this is use the smallest gauge wire possibly. 16g is too large and pulls too much current. I used 20g speaker wire an it worked perfectly. Wire should be similar to the thickness of a paperclip for this to work properly. Otherwise the orange display will flicker an speaker will not work. Ty for the easy fix.
Hello, i want to replace the led lights of it, do you have any information about it?
Glad I found this video. The speaker never crossed my mind
Can you let me know where you got the speaker from
Buen video, mi camión tiene el problema que marca el tanque frontal de aire más precion que el trasero, sabes si se cambia algún sensor del tablero Gracias
Keep up to great work on the videos
Awesome video where can I purchase one of those little speakers?
Can you please send me a link where you order new speaker?
hi.
Sir I have one problem ...volvo fh model 2007 RPM meter not working properly some time .....what is the problem. ...? I watched u r video I loved it so thank u.....
sir you saved me $2000 thanks. they told me to change cluster damn they r stealing
Very good video, thank you . I learned to much. But i have a cuestión, is necesario with the messure un ohms is 1K, if the messure is less what can i do ? The did clicks with the 9 V batey. Thank.
Excelente video, aprendí muchísimo, yo hice la prueba con la batería de 9V , y el parlante hizo clic, medi la salida en ohmios y solo tengo 15.6 ,cuando deben ser 1K ohms, que puedo hace en este caso?
Thanks a lot for your advice and video sir . From where we can buy this small speaker? I know online but can i buy somewhere from my city who carry speakers like that. ?
Wow. Saved us all a ton of money. Thanks. Drive safe
Vlad, do you remember the supposed ohms of the original speaker?
The Hoss not sure, but 8 ohms seems to be correct. If you put 4 ohms it might overload the amplifier but 16 ohm will be to quit. Hope that helps. Thanks
Thank Vlad
Worked like a dream, I was going to cut the at least one of the contacts to prevent excess resistance, but when I removed the back cover my speaker had a metal screen on it, I decided to remove it and under was the junk speaker cone and coil came with it, so problem solved. As all that remained was the original magnet.
Hey bro my abs is keeps coming on u know how to bypass I tried everything like short wire from from front to back and change abs sensor but still light in dash stays on any idea about that reply me or leave a reply here thanks
I'm having the same problem.
Did you find someway to disconnect
So where to get the buzzer itself? Thx..
I got the same problem if you take cluster off would it need to be reprogrammed
thank you for sharing I have the same problem in my truck but I don't know where can I buy the speaker .
Radioshack
Big thanks Vlad! Saved me a ton of money!
Thank you so much this worked for me you saved me a lot of money..
Thanks for the vid. I need to fix my buzzer and this is going to help alot. If you dont mind me asking, where did you get the new speaker from?
Tia! Keep them coming!
The link in the description is the actual speaker I used.
Where did you buy the speaker
ey budy i just go to dealer and they don't sale the part separate. ..where you suggest to buy?
What gauge of wires are used?
I replaced the speaker and still nothing. When i use my multimeter on the speaker it shows0.005 and i know its working it is brand new speaker, but on the from brackets right under the solded area it shows 1.100. What could be the issue ?
where we buy the speaker, i have 2014 model volvo
where I can buy that speaker?
Meho ima u RadioShack samo traziš mini speaker. Ja sam isto ovako uradio i radi ako je do zvučnika a 99% je do njega ako sve ostalo radi kako treba na desh tabli.
Cool cab interior switches!!! Where did you get them ? 👀
my light bulbs went off any idea how to get fix
very good. Thank you , my friend, this helped me out (and probably saved me a few hundred bux)
Where can I buy the speaker from?
I replaced mine with similar speaker 0.5W 8 ohm and it so quiet so I barely can hear it with the engine off. What can be the problem?
What gauge wire did you use?
4/18/20 Mine just quit! Thanks for the video!
Dude you saved my life
I did this with the same speeker but for some reason is not as loud , do you know what would be the problem
+Synergy Express Inc could be a faulty speaker. Make sure it's .5 watts and 8ohms, anything else might not work.
Is there any way to disable the speaker?
Not gona pass DOT , it will fail brake test
Very cool idea
good job man. this helps a lot.
It works!!! Thanks sir, appreciate your help 🙂
did u get speaker at volvo... or somewhere else..
+X ICE MAN H amazon, link in the description. Goodluck with it.
ebay or radio shack
thanks for help
Buy speaker: geni.us/27S1u
Helps me out: geni.us/JustVlads
Awesome video!!!!!
Hellow
My cluster meter file not open information display show data link fault so kindly refer repair information
Thank you sir. I’m going to do this next week
thank you Sir!
Thank you for ur video...it help me a lot.
Thanks brother!!! I hope I'll be able to fix it.
I did this but now my dash lights are gone.. anyone know how to fix
I díd What you díd but when i connected it all Turned off
Nice job. I need to replace my speaker too.
Thank you author!!
I have same problem thanks you for uploading this video 👍👍
How to fix highway horns
Thanks
Very helpful.thanks
Thank
Cool inside
thks very goog
Great great great
Good
thanks...i thougth its was harder
hi frinds i m a desle mechanc i serch a job in malaysia can any helllp me i need job malaysia
So it's basically fixed. 😜
Wouldn't be a Volvo if it had any air left in it after an hour.
Poor design.
The driver seat has a max weight capacity of 250 lbs
Thanks great information