This video was disappointing. I was looking for a start-to-finish video for a one-person setup for this same product. I got as far as you showed on the video on my own and was hoping to see how you managed the finish, but the video ended before that.
Stop and think...if you read some of these rude comments would YOU be in a big hurry to record the second half?! There is a reason why it is a good idea to be kind. I found this first half to be useful and used the same philosophy to recreate the second half (which would require having help to film.) Perhaps some kind soul will now film part 2. Meanwhile, here are the steps: Cont. from video... Now, go under the canopy. You will see the canopy is supported by a giant X. 1. Push up on the plastic cover at a joint (in the middle of a section of the x) until the popout button at the leg comes out of the bottom of the corner support. 2. Repeat for each leg. (Be patient, it isn't quite as easy as it sounds and requires some wiggling and pushing) 3. For each corner of the canopy, bring the material over the corner support so that the Velcro tabs line up. (One is on the canopy and the other is near the top of the leg.) 4. Secure the velcro along the sides. 5. Extend each leg to the desired height by first putting your foot on the leg foot and then pulling up on the leg until the popout button engages. Done! :-)
To clarify, in step 1 the popout button is near the top of the leg...below the black Velcro strip and above the corne support. For the OCD, reverse all steps to take it back down.💕
![[UNCUT] ลูกหมี-ลิลลี่ เหงียน เปิดใจฟาด ปู มัณฑนา I คนดังนั่งเคลียร์ I 15 ก.ค.67](http://i.ytimg.com/vi/FKQ60Y7bJ6s/mqdefault.jpg)
Wow!
That was amazing, that you can set up the canopy by yourself.
Thank you
Omg I got this far how do u finish???
I couldn't get the brackets up for to get locking pin in place
How you set up
Well, I certainly tip my hat to you young lady, but having done this a few times myself let me say, what a pain in the a$$.
This video was disappointing. I was looking for a start-to-finish video for a one-person setup for this same product. I got as far as you showed on the video on my own and was hoping to see how you managed the finish, but the video ended before that.
Same. Didn't know was so difficult
is this a video of torture for people who have OCD issues and must completed a task or they go crazy...
if, it's a success.
Oh that is funny!!! I was just so happy that I could do it on my own!!!
Stop and think...if you read some of these rude comments would YOU be in a big hurry to record the second half?! There is a reason why it is a good idea to be kind.
I found this first half to be useful and used the same philosophy to recreate the second half (which would require having help to film.) Perhaps some kind soul will now film part 2. Meanwhile, here are the steps:
Cont. from video...
Now, go under the canopy. You will see the canopy is supported by a giant X.
1. Push up on the plastic cover at a joint (in the middle of a section of the x) until the popout button at the leg comes out of the bottom of the corner support.
2. Repeat for each leg. (Be patient, it isn't quite as easy as it sounds and requires some wiggling and pushing)
3. For each corner of the canopy, bring the material over the corner support so that the Velcro tabs line up. (One is on the canopy and the other is near the top of the leg.)
4. Secure the velcro along the sides.
5. Extend each leg to the desired height by first putting your foot on the leg foot and then pulling up on the leg until the popout button engages.
Done! :-)
To clarify, in step 1 the popout button is near the top of the leg...below the black Velcro strip and above the corne support.
For the OCD, reverse all steps to take it back down.💕
Thank you
poor dog... probably chained
The camera is too close to see what you are doing.