PLEASE NOTE: This video is very old and since most of the information doesn't apply to the way I've been making my foam the last couple years, I'm strongly considering taking the video down. However, there's some good general info in here that people may find useful, so I will probably keep it up for a while longer. However, please don't ask me any questions about these foams, at least in reference to 1v1 products, because they're no longer relevant at all. Thx - Jason
Here's a tip for people on a budget and don't want to spend the money on 2 pairs of boxing gloves for when you want different density and protection. Use knuckle guards underneath your hand wraps to add more protection. It feels like a whole new glove.
Depends on the glove. Grant puts the foam on the outside and the horsehair on the inside, while Everlast puts the foam on the inside against the knuckles and the horsehair on the outside. We put our horsehair between 2 layers of foam, with a thicker, softer foam on the inside and firmer, thinner foam on the outside.
Want to open a custom boxing gloves spot in Florida a little south of you, would like to see if I could get you to do a glove with the sweat band thumb like hayabusa
Hello - I do not sell that foam, it is available in Pakistan. If you need a source, contact me with your volume requirements and I'll give you a quote. My email is jason@1v1fightgear.com.
Not my gloves. I imported 20 pairs of gloves for Jason V back in 2015, which were sold in a couple months, so whatever you had was something he purchased after 2015.
This video is pretty old, for the last couple years I've been using a 3 layer system for my US made PTE, and the ARK-1 is using the exact same foam setup as well (and the same stitching pattern).
No, that foam is what is typically used in your average $50-$70 glove. The closest thing to Winning is the last foam discussed (the black one). The only difference is that Winning does not use the inner soft foam piece you see in this video, and they do not use the cordura fabric infused with anti-fungal powder.
winning gloves are hype I have a pair of the 16oz ones in red but they hurt my knuckles on the bag and are good for sparring but the leather and quality are absolute wow (great)but I hit hard and the protex 3 evergel are my best overall gloves
Jason Neese thanks for the detailied reply. Personally I find the winning gloves foam to have excellent absorption on impact which other gloves just don't provide. I find the foam dissipates the force again so well. Would you mind disclosing where the foam is purchased from? Could I email you directly?
Hi! I'm doing a research about the foam used in boxing gloves for university. Is there any chance of telling us it's medium dencity? We easily found out it's high dencity foam but we cant really find the numbers
Corz Illa delivery to Oz is usually around $60 so I would take a little off that and charge you $50. This is in USD. Drop me a line at Jason@1v1fightgear.com to discuss if you’d like.
The foam is still multi-layered but the composition is slightly different. On my website you can see a picture of the foam as I'm currently building it (go to the PTE page).
Samu - you can email me at jason@1v1gear.com, and we ship anywhere in the world. Price ranges for custom gloves can be viewed at www.1v1gear.com and click on "Custom Shop", then scroll down.
7-8 hours of sewing, 6 square feet of leather, and overheads - it adds up! But custom boxing gloves isn't a high volume item, it's a specialty item, for a special customer base. However, our Pro Trainer and Pro Trainer Elite lines sell for roughly half that price, and use our best tech and materials, they just aren't sewn to custom specs.
PLEASE NOTE: This video is very old and since most of the information doesn't apply to the way I've been making my foam the last couple years, I'm strongly considering taking the video down. However, there's some good general info in here that people may find useful, so I will probably keep it up for a while longer. However, please don't ask me any questions about these foams, at least in reference to 1v1 products, because they're no longer relevant at all. Thx - Jason
Thanks for leaving this up. I find it helpful
Muchas gracias 👍
Love how you go in depth with your custom gloves
Skip to 7:11 and listen for crucial information
Okay, looks like I have some gloves to try! ❤❤❤❤
Here's a tip for people on a budget and don't want to spend the money on 2 pairs of boxing gloves for when you want different density and protection. Use knuckle guards underneath your hand wraps to add more protection. It feels like a whole new glove.
A great video my friend. Do you know what is the formula of the components to achieve the first glove? I need to know for my personal proyect. ;) !!!
My other question with people allergic to latex how does this affect them?
When companies make horse hair + foam gloves, how is it layered?
The horse hair is under the foam by the knuckle area.
Depends on the glove. Grant puts the foam on the outside and the horsehair on the inside, while Everlast puts the foam on the inside against the knuckles and the horsehair on the outside. We put our horsehair between 2 layers of foam, with a thicker, softer foam on the inside and firmer, thinner foam on the outside.
Want to open a custom boxing gloves spot in Florida a little south of you, would like to see if I could get you to do a glove with the sweat band thumb like hayabusa
Battle Ready Fitness & Defense drop me a line at jason@1v1fightgear.com
The black foam used for winning type gloves is that synthetic neoprene foam or natural neoprene rubber where can I buy from USA for my diy project
You sell foam ?
so you can make them in Pakistan ?
@@joeygonzoRight! Lol! Trade secrets for free! 😂
how do I contact you guys, do you ship to mexico? what's the range price?
Sorry I just saw this, I haven't been following youtube in a while. Yes we do ship to Mexico. Please email me at jason@1v1gear.com and we can discuss.
Hi, good afternoon, I liked this first foam, you sell only this foam and send it to Brazil?
Hello - I do not sell that foam, it is available in Pakistan. If you need a source, contact me with your volume requirements and I'll give you a quote. My email is jason@1v1fightgear.com.
𝙍𝘼𝙉𝙕𝘼 𝙎𝙋𝙊𝙍𝙏𝙎®
𝐃𝐞𝐚𝐥𝐬 𝐢𝐧 𝐜𝐮𝐬𝐭𝐨𝐦𝐢𝐳𝐞𝐝 𝐁𝐨𝐱𝐢𝐧𝐠 𝐞𝐪𝐮𝐢𝐩𝐦𝐞𝐧𝐭 & 𝐚𝐩𝐩𝐚𝐫𝐞𝐥𝐬 𝐞𝐱𝐩𝐨𝐫𝐭𝐬 𝐟𝐨𝐫 𝐛𝐫𝐚𝐧𝐝𝐬, 𝐚𝐜𝐚𝐝𝐞𝐦𝐢𝐞𝐬, 𝐫𝐞𝐭𝐚𝐢𝐥𝐬 & 𝐜𝐥𝐮𝐛𝐬 𝐰𝐨𝐫𝐥𝐝𝐰𝐢𝐝𝐞.
𝑳𝒐𝒐𝒌𝒊𝒏𝒈 𝒕𝒐 𝐂𝐮𝐬𝐭𝐨𝐦𝐢𝐳𝐞 𝒚𝒐𝒖𝒓 𝐁𝐨𝐱𝐢𝐧𝐠 𝑬𝒒𝒖𝒊𝒑𝒎𝒆𝒏𝒕?
𝙒𝙝𝙖𝙩𝙨𝙖𝙥𝙥:+923000821010
I have a pair of the heavy hitter. Boy, the padding is hard. The thumb opening is too far out too.
Not my gloves. I imported 20 pairs of gloves for Jason V back in 2015, which were sold in a couple months, so whatever you had was something he purchased after 2015.
Hi, Jason. That really helps with understanding padding. Which padding do you use for the ARK series?
This video is pretty old, for the last couple years I've been using a 3 layer system for my US made PTE, and the ARK-1 is using the exact same foam setup as well (and the same stitching pattern).
@@1v1FightGear so latex for all 3 layers?
Is the third one the foam out of a winning glove?
Thanks
No, that foam is what is typically used in your average $50-$70 glove. The closest thing to Winning is the last foam discussed (the black one). The only difference is that Winning does not use the inner soft foam piece you see in this video, and they do not use the cordura fabric infused with anti-fungal powder.
winning gloves are hype I have a pair of the 16oz ones in red but they hurt my knuckles on the bag and are good for sparring but the leather and quality are absolute wow (great)but I hit hard and the protex 3 evergel are my best overall gloves
Jason Neese thanks for the detailied reply. Personally I find the winning gloves foam to have excellent absorption on impact which other gloves just don't provide. I find the foam dissipates the force again so well.
Would you mind disclosing where the foam is purchased from? Could I email you directly?
Sorry - no manufacturer reveals the sources of their raw materials, ever. I will say that I buy from a US company though.
MK 1
Knu
Hi! I'm doing a research about the foam used in boxing gloves for university. Is there any chance of telling us it's medium dencity? We easily found out it's high dencity foam but we cant really find the numbers
For the primary foam, I have no idea about the density, it's a fairly dense latex foam.
You still make custom gloves or know good manufacturers? Very interested,
Y2DMC yes, non-stop! Check out my Instagram page. Drop me an email at jason@1v1fightgear.com
𝙍𝘼𝙉𝙕𝘼 𝙎𝙋𝙊𝙍𝙏𝙎®
𝐃𝐞𝐚𝐥𝐬 𝐢𝐧 𝐜𝐮𝐬𝐭𝐨𝐦𝐢𝐳𝐞𝐝 𝐁𝐨𝐱𝐢𝐧𝐠 𝐞𝐪𝐮𝐢𝐩𝐦𝐞𝐧𝐭 & 𝐚𝐩𝐩𝐚𝐫𝐞𝐥𝐬 𝐞𝐱𝐩𝐨𝐫𝐭𝐬 𝐟𝐨𝐫 𝐛𝐫𝐚𝐧𝐝𝐬, 𝐚𝐜𝐚𝐝𝐞𝐦𝐢𝐞𝐬, 𝐫𝐞𝐭𝐚𝐢𝐥𝐬 & 𝐜𝐥𝐮𝐛𝐬 𝐰𝐨𝐫𝐥𝐝𝐰𝐢𝐝𝐞.
𝑳𝒐𝒐𝒌𝒊𝒏𝒈 𝒕𝒐 𝐂𝐮𝐬𝐭𝐨𝐦𝐢𝐳𝐞 𝒚𝒐𝒖𝒓 𝐁𝐨𝐱𝐢𝐧𝐠 𝑬𝒒𝒖𝒊𝒑𝒎𝒆𝒏𝒕?
𝙒𝙝𝙖𝙩𝙨𝙖𝙥𝙥:+923000821010
the 100% latex glove like you said from the reyes glove, what is the average price range of a glove using that sort of filling?
Contact me directly for any price requests, jason@1v1gear.com. Thanks
How can u fill the foam in the gloves
What is the absorbent black cloth on the layered gloves made out of?
Don't remember - it was seven years ago and my foam is completely different now, sorry!
4 layer 1V1 is the BEST.
i have winnings 16 oz ,and they not that good like they use to do ,, to wide 2 soft .
Most of the companies are now looking for injection molded foam padding.
Your gloves aren't pretty. If you want to sell more gloves to the US or Europe, you will need to have 3-layer padding.
ofc hence most the gloves in the market is a piece of junk
Hey Jason I am super keen to get a pair of 16oz sparing gloves... how much would it cost IN Australian dollars to get a pair delivered here?
Corz Illa delivery to Oz is usually around $60 so I would take a little off that and charge you $50. This is in USD. Drop me a line at Jason@1v1fightgear.com to discuss if you’d like.
For the velcro version Is there any foam on the inside of the wrist like the lace ups?
Yes there is
What is the purpose of the thumb foam being separated like that?
I don’t separate it, I glue it together now - this video is pretty old.
Do you still the same foams for the pro trainer?
The foam is still multi-layered but the composition is slightly different. On my website you can see a picture of the foam as I'm currently building it (go to the PTE page).
Please put all the process how to make it
😂😂😂
Are you selling any gloves?
Saif, I finally bought a pair from Jason this year. They are the best.
@@joeygonzo where do you buy these from
@@saif1980saif What is the purpose of the thumb foam being separated like that?
adidas custome! congrats
nic
Samu - you can email me at jason@1v1gear.com, and we ship anywhere in the world. Price ranges for custom gloves can be viewed at www.1v1gear.com and click on "Custom Shop", then scroll down.
Do you have an email
chocymachado jason@1v1fightgear.com
Unit
$300 is too much imo
7-8 hours of sewing, 6 square feet of leather, and overheads - it adds up! But custom boxing gloves isn't a high volume item, it's a specialty item, for a special customer base. However, our Pro Trainer and Pro Trainer Elite lines sell for roughly half that price, and use our best tech and materials, they just aren't sewn to custom specs.
Greetings,
I am looking for replacement padding for my Venum Muay Thai gloves. Do you guys provide a service to repair or replace foam? Please advise.
@@JohnJTymn Sorry I'm just seeing this! No, sorry we don't provide that service. By the time you do all that work, you may as well make a new pair.
🔥🔥
Which foam Grant use?Did you have pictures of that?
layered latex