Setup a Pi Node - A Complete Guide (2023)

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 140

  • @Geekrar
    @Geekrar  ปีที่แล้ว +6

    Here's my Pi Network Invitation: minepi.com/geekrar
    You can join my Pi Team
    😃

    • @Tech.Library
      @Tech.Library ปีที่แล้ว

      what special effect are u using as the transition? It sounds like the sound of camera captur

    • @Geekrar
      @Geekrar  ปีที่แล้ว +1

      @@Tech.Library in the intro? It was some stuff i found on storyblocks. Most of the stuff is chopped up bits i find on their site

    • @learnit2231
      @learnit2231 ปีที่แล้ว

      Any idea, how one can run that of Linux?

  • @williammunoz5312
    @williammunoz5312 ปีที่แล้ว +5

    hi, please, can you help me to open the ports?, or can you to do a video about it?, thanks!

  • @MalcolmJubinville
    @MalcolmJubinville ปีที่แล้ว +11

    It seems there is something broken between the Pi Node app and Docker that will not allow the program to properly check ports and allow the program to proceed past the port listener steps. I was able to get the node-port-test container working by running the command: docker run --name node-port-test --env PORTS="31400,31401,31402,31403,31404,31405,31406,31407,31408,31409" -p 31400-31409:31400-31409 ese7en/node-port-test which opened the ports correctly but the Pi Node app will still not allow the program to proceed forward. It looks like we are stuck until the Pi Network team fixes the application? If you have an updated video that you can share with what is going on, that would be amazing. Thanks!

    • @farhadmedari3112
      @farhadmedari3112 24 วันที่ผ่านมา

      Hi. Is it may write step by step & teach me about how to connect pc or laptop to cellphone,,,, node ,, please??
      Thanks sir 🎉

  • @Shinajims
    @Shinajims ปีที่แล้ว +4

    can i set up node with my phone hotspot without a router ?

  • @mtcleric3275
    @mtcleric3275 8 หลายเดือนก่อน +4

    Hi, I have a few questions. How much percentage will it add to the mining for each node? Does the mining rate increase if you have a more powerful computer? Can we have more than 1 node / account?

    • @wovasteengova
      @wovasteengova 4 หลายเดือนก่อน

      good question. No idea.

  • @kadenlg7631
    @kadenlg7631 ปีที่แล้ว +20

    When I check it gets stuck at “downloading ports listener”

    • @JoshBusd
      @JoshBusd 10 หลายเดือนก่อน

      same here

    • @ADMario
      @ADMario 9 หลายเดือนก่อน

      Same

    • @studio_lumina
      @studio_lumina 9 หลายเดือนก่อน

      Usually it does, but pi just dropped a new update, and that issue has been fixed

    • @user-oh4dq7nn4q
      @user-oh4dq7nn4q 3 หลายเดือนก่อน

      Okay

  • @thehoneybeeambassador6548
    @thehoneybeeambassador6548 ปีที่แล้ว +11

    Does a Pi node runner get more Pi than the one who mines of phone.

  • @cyptowithkelv
    @cyptowithkelv ปีที่แล้ว +3

    Can I use vps instead of a laptop?

  • @karim-manaa
    @karim-manaa 26 วันที่ผ่านมา

    What are the info you added in your router? Mine says that the beginner port should be less than 16383 so i can't add those Pi Node is using

  • @lootbuzz
    @lootbuzz ปีที่แล้ว +3

    Is it possible to run node on a dhcp connection ?

    • @MalcolmJubinville
      @MalcolmJubinville ปีที่แล้ว

      Yes - you probably need to ensure you have port forwarding configured to you local machine to ensure that ports (31400-31409) are getting to the right machine

  • @eldarimamovic8941
    @eldarimamovic8941 3 หลายเดือนก่อน

    The Docker app cant run on my PC 😓😓😓 what a bummer

  • @rascal.elder6594
    @rascal.elder6594 หลายเดือนก่อน +1

    is static IP mandatory for running Pi Node?

  • @uniqueairdrops3785
    @uniqueairdrops3785 5 หลายเดือนก่อน +1

    please am a bit confuse hope this process won't affect my router from working because am using starlink

  • @RupertTECHTV
    @RupertTECHTV ปีที่แล้ว +1

    please make a video PI NODE Port forwarding/IPV4 Port mapping using Huawei EG8145V5 router

  • @CyberAI1
    @CyberAI1 หลายเดือนก่อน

    Hi @geekrar, is it possible to run the node on the cloud VM ?

  • @AetherWave432
    @AetherWave432 9 หลายเดือนก่อน

    Is it possible to do this same process but on Windows10pro?

  • @richletter1
    @richletter1 13 วันที่ผ่านมา

    Is there any changes at this moment Dec 2024

  • @Ether8642
    @Ether8642 2 หลายเดือนก่อน +1

    you should explain about Open Port and IP set up first to run node.

  • @tanuipaul349
    @tanuipaul349 4 หลายเดือนก่อน

    Hello! I have a difficulty. I have followed the video to the later and i have reached the part where they tell me this... " Unable to reach network, please provide the IP/domain of a known node to connect to, as well as an alternative URL to download history from".
    please can you help?

  • @peacemichael8482
    @peacemichael8482 2 หลายเดือนก่อน

    My docker isn't working after installation. Is showing unexpected WSL ERROR

  • @diadinne
    @diadinne 23 วันที่ผ่านมา

    I have problem
    (HTTP code 500) server error - driver failed
    programming external connectivity on endpoint pi
    port-checker
    (cd0233bbe97051e087afdba28d330687792b739f
    a00b44a2d39906a1b847263f): Bind for
    9.0.0.0:31401 failed: port is already allocated

  • @trailerchannel7648
    @trailerchannel7648 หลายเดือนก่อน

    How did you open the ports?

  • @88Jazza
    @88Jazza ปีที่แล้ว

    You port forwarding link in your video doesn't work, and i cant find the video on your channel..

  • @xest1759
    @xest1759 หลายเดือนก่อน

    i did everything and i still can get it to check now in Pi node I NEED SOME HELP

  • @ThePARTY126
    @ThePARTY126 ปีที่แล้ว +1

    can you do it for mac

  • @Justinas_Balciunas
    @Justinas_Balciunas 9 หลายเดือนก่อน

    And when you gonna do kyc?

  • @igotcha1345
    @igotcha1345 6 หลายเดือนก่อน +1

    Seems to be working fine for me after I reinstalled it on Windows 11. Takes a few days if your selected to be a node

    • @ahmedelfoly7335
      @ahmedelfoly7335 18 วันที่ผ่านมา

      What is the bonus percentage?

  • @AaaaBbbb-tj2so
    @AaaaBbbb-tj2so 7 หลายเดือนก่อน

    Hi after installing, it says ENGINE STOPPED, how to start it ? Help please

  • @kylebatten6300
    @kylebatten6300 ปีที่แล้ว

    my docker keep showing window says "Docker Desktop is unable to detect a Hypervisor."
    tried everthing didnt work... been at this point since month. grrr

  • @shinda99
    @shinda99 ปีที่แล้ว +1

    sir plz also make video on Port Forwarding . i did all steps but its not easy
    i hv ZTE F670L Plz guide

  • @Chimorigin123
    @Chimorigin123 8 หลายเดือนก่อน

    Can i set up my node with just my Android phone?

  • @LetsTalkPodcasting
    @LetsTalkPodcasting ปีที่แล้ว

    Thank you for all the Help!!!!

  • @anthonyperez4950
    @anthonyperez4950 ปีที่แล้ว

    How do I get the container in Docker Desktop?

  • @Markuz1775
    @Markuz1775 4 หลายเดือนก่อน

    Yes, but what does the Pi node actually do ? Does it increase the Pi coins earned in 1 day? IS it useful to have it on?

  • @buzzfeedRED
    @buzzfeedRED ปีที่แล้ว

    after docker installation, got an erro of wsl, not able to resolve

    • @areongoreen1484
      @areongoreen1484 4 หลายเดือนก่อน

      virtualization turned on in bios?

  • @gcapuano311
    @gcapuano311 ปีที่แล้ว +3

    Can you help me install my Node? I installed Docker and Pi Network app but when I click on the Node button it just takes me to a load screen that never actually loads. The screen loads before I install Docker, but once it is fully installed the Node screen won't load, so I am not able to connect my ports.

  • @K.shiar123
    @K.shiar123 6 หลายเดือนก่อน

    Hello sir please help me how to setup pi node

  • @MrMiri2003
    @MrMiri2003 ปีที่แล้ว +2

    Hi, thanks for the tutorial but I can't get open any port on my router! can you help me with it?

    • @Geekrar
      @Geekrar  ปีที่แล้ว

      ya its a bit tricky. i made this video on my crypto channel, specifically for port forwarding th-cam.com/video/ISw0pR6X-as/w-d-xo.html

  • @AliRaza-wf7sn
    @AliRaza-wf7sn 8 หลายเดือนก่อน

    After installing docks my windows crashed and now it says no bootable device

  • @shorts-reels-shorts
    @shorts-reels-shorts 10 หลายเดือนก่อน

    do you think Pi will launch main net and is it gonna worth it to mine Pi ???????

    • @Ali_Crypto30
      @Ali_Crypto30 หลายเดือนก่อน

      Yes, main-net will be launch before pi2 day which is June 28, 2025. Is it worth to mine? Nicolas has been in the space even before the invention of BITCOIN I myself sometimes think hes Satoshi himself or knows who he/she or they is. It’s definitely worth mining right now.

  • @game_a_playa
    @game_a_playa 11 หลายเดือนก่อน

    So my windows 10 pc won't work right?

  • @MB-fn4ii
    @MB-fn4ii ปีที่แล้ว

    Help! Upon restart, my laptop suddenly won't boot and is only stuck at black screen.
    Need help ASAP! 🙏
    I'm actually serious about this! I followed everything in this guide only to end up causing me harm!
    edit: thankfully I looked up online to find a way to get back in, which is safe mode. I got it back safely. However, the issue bout making the node is still left unsolved.

  • @ewf-u4h
    @ewf-u4h ปีที่แล้ว

    how to open the node ports?

  • @AbdulWahab797
    @AbdulWahab797 ปีที่แล้ว +8

    How much Pi can I earn form the node? On daily or hourly basis?

    • @igotcha1345
      @igotcha1345 5 หลายเดือนก่อน +4

      I have gotten 5.38 X more

    • @samomamour8531
      @samomamour8531 3 หลายเดือนก่อน

      ​@igotcha1345 does this tutorial work with u plz ?

    • @AbdulWahab797
      @AbdulWahab797 หลายเดือนก่อน

      ​@@igotcha1345 wow. How can I set the ports in the router?

  • @LondonDoorman
    @LondonDoorman ปีที่แล้ว +1

    can i run a node on a raspberry pi?

    • @arijunal
      @arijunal 8 หลายเดือนก่อน +1

      That's what I want to know also

  • @vidakoviic
    @vidakoviic ปีที่แล้ว

    Hello. I am sorry for my dumb question, but when i connect a Node to my router, will i get a higher internet bill?

    • @Geekrar
      @Geekrar  ปีที่แล้ว

      It doesn't use much data, you should be fine but really depends on your internet plan

  • @Thiilborg
    @Thiilborg ปีที่แล้ว +4

    This is basic a PI node install and not setup. I guess there is lots of setup and add ons after this point.

  • @seaquesttv2826
    @seaquesttv2826 หลายเดือนก่อน

    question if you log to pi node is it going to increase your mining rate?
    or the same

    • @crow0000
      @crow0000 หลายเดือนก่อน

      The same i think

  • @christopherwest252
    @christopherwest252 ปีที่แล้ว

    So since I have already passed my KYC
    What do I hit for the last question on the application form for the node
    Do I hit no not now
    Or do I hit yes for KYC App
    I'm a bit confused

  • @cryptobin03
    @cryptobin03 3 หลายเดือนก่อน +1

    its not working on windows 11pro

  • @thethunder5057
    @thethunder5057 10 หลายเดือนก่อน

    How can I exit the application inside the laptop if it is stolen????? How can I close it via my mobile phone?

    • @rvce
      @rvce 9 หลายเดือนก่อน

      You don't need to close it via your phone. Use laptop and uninstall the application.

  • @Septicaemic_
    @Septicaemic_ 8 หลายเดือนก่อน +1

    Came here to see if I missed something in setup because after almost 24 hours of running, I'm still on local block 1. Back to hunting for answers and waiting 😂

  • @superbobby1666
    @superbobby1666 ปีที่แล้ว

    Hi ! with Windows 10 Pro it is possible to have the Pi Node or is Windows 11 really essential?

    • @Hmx_mrx
      @Hmx_mrx 11 หลายเดือนก่อน +1

      Yea u can

    • @vecvagarswebdesign
      @vecvagarswebdesign 10 หลายเดือนก่อน

      That means that minimum requirements is windows 10 @@Hmx_mrx

  • @Theowaisbanday
    @Theowaisbanday 15 วันที่ผ่านมา

    Brother please provide me any contact link I want to run my pi node on Linux there are many issues

  • @kevinleeds7550
    @kevinleeds7550 ปีที่แล้ว +4

    This won't work.
    No Powershell commands No WSL2 install
    no mention of setting home network to private or
    IP assignment if not using Automatic (DHCP)

    • @SanongPenmongkol
      @SanongPenmongkol ปีที่แล้ว

      this clip omitted few steps, there is a wsl2 command line.

    • @mattjoe19
      @mattjoe19 ปีที่แล้ว

      Can it work on Windows 10?

    • @SanongPenmongkol
      @SanongPenmongkol ปีที่แล้ว +1

      I am running on windows 10

    • @mattjoe19
      @mattjoe19 ปีที่แล้ว

      @@SanongPenmongkol mine is stuck. I installed Docker , enabled Hyper-V and updated WSL but the Pi Node is stuck at "Please wait... Loading may take up to one minute."
      I have closed and opened the Pi Node countless times but still same problem.

    • @SanongPenmongkol
      @SanongPenmongkol ปีที่แล้ว +2

      @@mattjoe19
      1. Open ports in window firewall
      2. If you run private IP, you need to forward traffic from outside (wan) to your private IP in router. If you use public IP then no need to do this
      3. Do windows Update to latest
      4.install powershell
      5. Install wsl, wsl2. Reboot.
      6. Set default wsl2
      7. Install docker
      8. Test ports Only work if you have dummy image running. It will run and stop in few minutes later. That is fine.
      9. When turn on node it will kick off new image to run node. Here you will know it work or not.
      You need to keep it run long hours to update Blockchain before seeing bonus.
      Window page file X2 amount of ram

  • @ryano8002
    @ryano8002 ปีที่แล้ว +5

    I never get passed the "downloading ports listener" it just goes back to grey for me.

    • @tylerrlue
      @tylerrlue ปีที่แล้ว +3

      i got around this issue by port forwarding, then when I still had the issue, I turned off the app and edited the 'user-preferences.json' file and added "containerFlavor":"stellar" between dockerimage and portscheckpassed - which i also set to true. then after that i turned the pi network app back on and it skipped the port and docker screen and started the container. then when i tested whether the ports were open, this time it said they were. hope this helps

    • @aggelosged-nk4pi
      @aggelosged-nk4pi ปีที่แล้ว

      Thank you @@tylerrlue this worked for me aswell!!

    • @Alen069
      @Alen069 ปีที่แล้ว +1

      where is the file located?@@tylerrlue

    • @tylerrlue
      @tylerrlue ปีที่แล้ว

      @@Alen069 appdata/roaming/pi network i believe

  • @mattjoe19
    @mattjoe19 ปีที่แล้ว

    Does that mean my windows 10 can't run Pi Node?

  • @tugsataydn850
    @tugsataydn850 ปีที่แล้ว

    I tried everything, it doesn't work, do I need a static ip to run a pi node?

    • @Geekrar
      @Geekrar  ปีที่แล้ว

      You do need an external public IP for this to work properly

    • @SanongPenmongkol
      @SanongPenmongkol ปีที่แล้ว

      @@Geekrar is it best for a cloud instance with public IP so you dont need port forwarding ?
      and, i passed kyc, what option do i choose during setup ?

  • @n.antonypackiatitus630
    @n.antonypackiatitus630 ปีที่แล้ว

    Is running a pi node damages the laptop?

  • @naturetoday6531
    @naturetoday6531 6 หลายเดือนก่อน

    What is advantage

  • @abrahamifeoluwa2950
    @abrahamifeoluwa2950 7 หลายเดือนก่อน

    Whats the essence of the pi node

  • @DARSHANHARSHACHANNEL
    @DARSHANHARSHACHANNEL ปีที่แล้ว +1

    Sir how can I get forget phasspase plzzz upload one video on that ... Plz sir

    • @Geekrar
      @Geekrar  ปีที่แล้ว

      Passphrase for what?

    • @rvce
      @rvce 9 หลายเดือนก่อน

      You can't get passphrase back again if you lose it. Don't even try looking for solution. There is no solution

    • @DecentMmiri
      @DecentMmiri 5 หลายเดือนก่อน

      Otilo

  • @nico-nk2ro
    @nico-nk2ro ปีที่แล้ว +1

    question : que gagne t-on un installateur sur un node pi ? Thanks

  • @BitQuestBD
    @BitQuestBD ปีที่แล้ว

    how many pi earn with node

  • @nevose9046
    @nevose9046 ปีที่แล้ว

    Docker doesn't function, I press accept and then docker crashes, always.

  • @vinayakgham3391
    @vinayakgham3391 หลายเดือนก่อน

    😢😢😢
    I Just Installed Docker...
    Docker Is Not Starting...
    I Don't Know What's Going Inside...
    First They Asked Me For Use As
    Personal
    Company
    Student
    Teacher etc etc
    Then I Skip This Use...
    Then Just Empty Window Of Docker Is There...
    Where Is Containers...?
    😢😢😢
    Nothing Is Going On...
    I Am New To Docker..
    Now Asking For Sign In
    Why To Sign In...
    Can I Skip This.
    Or Sign In Mandatory...
    2nd I Got Error After Installation...
    Docker Desktop Encountered Error
    May be egine is not working😢😢😢
    Running engine waiting for docker api .... Failed
    😢😢😢

  • @cyptowithkelv
    @cyptowithkelv ปีที่แล้ว

    Can I use Linux?

    • @Geekrar
      @Geekrar  ปีที่แล้ว

      not that i know of, just windows and mac

  • @thephysicist5745
    @thephysicist5745 5 หลายเดือนก่อน +1

    do you think i will be rich with my 2.5m pi coins ?

  • @CryptoEducationBD
    @CryptoEducationBD 10 หลายเดือนก่อน

    thanks

  • @muhammadharoon5301
    @muhammadharoon5301 ปีที่แล้ว +1

    Great

  • @JoshBusd
    @JoshBusd 10 หลายเดือนก่อน

    Whenever i click on check now it spins on downloading ports listener but nothing happens please help

  • @norbertkarsai3085
    @norbertkarsai3085 ปีที่แล้ว +1

    what the f**k internal host when i want to open port????

    • @aggelosged-nk4pi
      @aggelosged-nk4pi ปีที่แล้ว

      its the ip of the computer the node is running on

  • @patricka.crawley6572
    @patricka.crawley6572 ปีที่แล้ว

    wsl kernel too low.
    What an obstacle course all of this is

  • @glaeli1184
    @glaeli1184 5 หลายเดือนก่อน

    Think I’m gonna stick to the mobile app lol

  • @eg0x
    @eg0x ปีที่แล้ว

    useles guide dude ...

    • @MalcolmJubinville
      @MalcolmJubinville ปีที่แล้ว

      It's actually the way it should work... the problem is the Pi Node app seems to be broken atm...

  • @errersky
    @errersky ปีที่แล้ว

    these are the things i am getting while port forwarding
    Server IP address
    External IP Address
    External start port
    external end port
    protocol
    Server IP address
    Server port
    help me by telling what to fill in all of these

  • @didyouknow5694
    @didyouknow5694 ปีที่แล้ว

    Hi getting TypeError: ports[i].trim is not a function

    • @彭眯眯眼乓
      @彭眯眯眼乓 ปีที่แล้ว

      you dont need to install/run a port checker. All you need is port forwarding. As long as you did it right, the node will run.

    • @彭眯眯眼乓
      @彭眯眯眼乓 ปีที่แล้ว

      To do port forwarding, you need to set it on your router. Also don't forget to allow the traffics on your firewall for the range of ports

    • @aggelosged-nk4pi
      @aggelosged-nk4pi ปีที่แล้ว

      @@彭眯眯眼乓 will the super node also run properly without the specific test passed?

    • @彭眯眯眼乓
      @彭眯眯眼乓 ปีที่แล้ว

      @@aggelosged-nk4pi yes. As long as you set it correctly.

  • @kennyliang7395
    @kennyliang7395 9 หลายเดือนก่อน

    code:14ken

  • @lradha3719
    @lradha3719 5 หลายเดือนก่อน

    Container stops running always before pinging is even completed, Idk what to do!