How to Make Flatcap
ฝัง
- เผยแพร่เมื่อ 20 ก.พ. 2018
- **Supplies Needed**
-LINK to Buy Pattern: capsupplyco.com/index.php?rout...
-LINK to Buy Sewing machine Singer 4423 goo.gl/33eHF8
-LINK to Buy Polyester/Cotton Twill Fabric By The Yard Here: goo.gl/fbfFzT
-LINK to Buy Bias tape folder attachment: goo.gl/E4X5go
-LINK to Buy Bias Tape: goo.gl/rtMLte
**Proper Fit Clothing Social Media**
Instagram: @properfitclothing
Snapchat: properfit.usa
*** Music ***
All the music was produced by Alek Pol. Huge Thanks! Be sure to go follow him on SoundCloud and TH-cam!
/ alekp
This is a fun DIY sewing project! Great for beginners! This tutorial walks you through the steps on how to take make a flatcap, Gatsby hat, newsboy hat, cabbie cap. The video also includes a printable pattern so you can follow along easily. Make your own peaky blinders style of flat caps today! What are you waiting for! Hope everyone has fun with this sewing project! Be sure to like, subscribe, and comment! Thanks for watching!
Presented by Properfit Clothing Company | Quality Designer Clothing made in Grand Rapids, Michigan USA.
Filmed with Samsung NX1
Link to Buy the camera we use off of Amazon: goo.gl/oagtMv
Link to Buy Beholder DS1 Handheld Stabilizer for DSLR Camera off Amazon: goo.gl/Fm5iRf - บันเทิง
Great Video, you have a knack giving instructions.
I’d like to offer some tips, having designed and sewn for 30+yrs, I’ve picked up quite a bit of knowledge. I’d like to pass on.
1- When working with curves. Either place several pins, joining the two pattern pieces together or baste the pieces, an 1/8” away from the stitching line. Also place the curved piece, next to the feed dogs and decrease stitch length. The feed dogs will aid in feeding the excess fabric. Decreasing the stitch length, also helps in feeding both pieces of fabric uniformly.
2- When sewing the lining, leave approximately 2- 2 1/2” of the seam, without sewing it. Then you can place right sides together, stitch the seam around the circumference, when finished, pull the hat fabric through the open. Yes, small amount of hand stitching, but the results are worth it. Hat band can be attached with an 1/8” top stitch.
Gives very clean and professional results.
I'm trying my hand at my very first hat, the video was great also loved reading your comments as well. I will use all that I have learned from the video and your comments.
@Tiffany's Piece of Cake I am not the video maker but from what I understand is at12:10 no, not through the brim. At 12:45 yes he sewed through the brim but he said 1/4", not 3/4". Hope this helps.
Robert Sherma
Thanks for the instructions. I will get them in mind!
I love the directions. I changed the order at first to sew the sides on before sewing the end together and i was able to make the corners smoother. Thank you, krista
It's really a helpful tutorial for novice like me.
Nice tutorial thoroughly enjoyed watching
This guy knows how to handle the fabric with very little pins.. Jedi....
You're a genius. Great tutorial.
This is a brilliant video, thanks for sharing your tips, tricks and pattern. That trick with the bias tape folder is awesome, I can't wait to try it 😀
- Very nice job. I like the Flat Cap. Thanx for sharing.
I love it because some of these caps are so expensive ( this give me the idea how to style my cap) thank you
Danke für das tolle Video. So wie Sie es nähen, ist es viel einfacher.
sick ! great tutorial. easy to follow and understand 🙏
I have just ordered the pattern and I am so ready to make me one. Thanks for this
Thank you for a great video and pattern.
Excelente aula, obrigada
Finally I have been struggling with making a good flatcap hat.
Me fascinó gracias quedó hermosa 😁
Very good! Great teacher!
Thanks for the vid, I'm really keen to give this a shot!
I'm a bit of a novice; what is the bias tape for? I can't figure out how it affects the finished product.
- Nicely done. Thanx 4 sharing.
Great video! Thank you!
Great instructions--thanks
thank you! i bought a pattern years ago. i hadn't found the brim insert. thanks for the info! also couldn't decide on fabric. i have a dress i made years ago out of a sort of abraham moon tweed. i can get several hats out of it with the lining.
Right on time!!!
Look at the way you hold that pencil lead in your finger while you use both hands...whoa Jedi Master
great view and thank you for sharing.
Very cool I was just wondering if I can do it with a different types of fabric like west African print
Genial muchas gracias
WoW so cool to see how it’s made! I was watching Peaky Blinders and there man were wearing these caps and I was wondering how they are made ! Now I know! Great work!
Peaky blinders where newspaper boy cap. This is what they call cabby flat cap or a beret flat cap.😉
Wow. Very nice
Amei explicação ótima.
This is just cool. Thx for that. I'll try for sure.
VERY GOOD THANK YOU SO MUCH
cool video man , well done,
Thanks it's lovely
"Definitely don't give up after one cap"
Amen
LOVE THIS VIDEO!! I wear hats alot, but normal.peak caps are really annoying. I foresee I will indeed be making alot of these. 😊
thanks my dad is gonna love it
Waw, well done you! Thanks, I know how to do it now ❤👍👍👍👍🙌🙌🙌
Nice toturial bro... ❤❤❤❤
Very nice thank you.
In awe!!!!
Thank you. This is a really good how-to. Just a tip: you say access. I think you mean excess. "any excess material"
great video - where does one get the sweatband?
thanks mate, I'm going to make one for me little kid right away
Perfect 👍👍
Perfecto
Great tutorial learned a lot; I've not seen binding made and attached like that before!
Hola tbn soy de chile.tienes el patrón de tutorial?
I noticed you don't use buckram. My pattern called for that. It was very difficult to use hense the reason I only made one.
Wonderful video thanks sir very much
Hey sir is the pattern pdf? Can I down load it quickly ?
Hello, thanks for the teaching you are giving with your video, how can I send you the molds?
This is a good video but as future tutorial for the videos you should use a thread that stands out. And maybe different fabrics for the panels. How would I scale the pattens for my a harger head. I have 25 inches circumference and 14 inches over the top ear to ear
You get it on your laptop and then using paintshop pro or similar, increase the size by whatever …. say 25%, then you need to take it to a printing house on a usb and get them to print off the larger size. I am sure there is a different method but that is one way to do it. I scaled it down a lot to make one for a teddy bear
1/4” Seam allowance on this pattern?
Btw I have a single needle juki machine so these domestic single needle tutorials are clutch! 🙏🏾🙌🏾
six2six Yes, 1/4” is correct for this pattern.
Thank you so much for this tutorial!!!
Debería dar pero con las medidas y si pueden traducido
Amazing
do leather cap and hats !!
Thanks i will try to make one
Holding out for a cadet cap pattern!
Awesome
Trying to find the Bias tape folder you use. It doesn’t show on the capsupplyco site.
Will your pattern accommodate head size 64 cm or 25.2 inches?
Where I can find this pattern? Thank you
Ke. Linda y. Voy a hacer una a ciadritos Grazie,!! 👍❣️
Gracias por compartir sus conocimientos bendiciones
I don’t know if this will help anyone but I’m pretty certain that my Granda’s flat caps had a snap clasp to hold the overhang in place on the brim, which would allow for adjustment as and when required ie you could unclasp it so that you can pull the hat down further to catch the top of your ears in bad weather.
Nice video
Nice 👌👌👌
شكرا ا على الطريقةالحرفية
Excelente video aunque no se inglés pero aprendí de todos modos 😁
Hey! This is great! But what about sizing? After buying the cap pattern, I realized it's only one size...
I have a combination scanner / printer which allows me to adjust the size (by percentage), when I make photocopies. It's really easy to figure out with any pattern. Just take the size you want. Always divide the number of the size that you want by the number of the pattern you have, then multiply by 100. I believe this one is 58. So if you wanted 56, you need to copy at 96 or 97%, if you want size 62, copy at 107%. Simple.
Please make a beret also
perfect bravo
kero make me one for my apology I liked the model, how do I get the mold or how do you do what measurements are taken? Thank you very much if you can
Where can I order the sweatband used in your video?
Check the links in the description.
Thanks
Does one size fit all or can you adjust for sizes?
The pattern is literally just 3 pieces. No sizing or instructions. If you have experience with patterns, you may be able to figure out how to extend it if needed.
Would be nice to have written instructions. And also to know how much fabric is needed. Patterns generally have that info.
Queria o molde 😩
How can I get a hold of a pattern to the flap cap?
Wooo
Tried to buy a brim off the site, but they only have ball cap size, and the pattern for this doesn’t quite match up.
Soy de chile y hablo solamente español, puedes subir los vídeos en español por favor.Están muy bonito tomó que suaves pero no puedo hacerlos porque no entiendo.gracias que estés bien
Hola .tbnde chile tienes el patrón?
I'm trying to register as a user on your site so that I can buy the pattern, but the CAPTCHA mechanism isn't working. Please help!
I have one that is too small as I can widen it so it fits bigger mow
me encanto si pudieras ayudarme con los moldes
I love to see something in demin or mix matireal.
Like what kind of problem I might encounter
If you use a thin denim, use the interfacing. If you use a thicker denim that holds its own shape, skip the interfacing. Also, if you're going to use a thick denim, I would adjust the sizing a little and add a lining along with the bias tape.
Esta tuani
What is the largest size on the pattern for this hat (I have a size 8 or 3xl)
undecidedgenius Have you tried this yet? I'm going to give it a go and will let you know if it fits my pumpkin head.
undecidedgenius just did a muslin mock-up. Took me three days to figure out how to attach the back of the sides. The size is tiny-tieny. It sits on my head like a small saucer. If I figure out how to scale it I'll let you know. Considering it took me days to figure out the video, don't hold your breath waiting.
@@capedoryus I just finished making the base of the cap, all except the brim. And, it does not have the fullness of the hat I am attempting to replace with this one. Bummer! I too, am going to try to resize the pattern for my needs and I will let you know if I am successful.
Really love the tutorial but there is no link to download the pattern
Bonjour,
Quelle est l'adresse pour commander le patron ?
Hi could you please send me a link, for the bias folder attachment I've looked on the site mentioned and can't find it please help me yours konrad
does the patterncome in just one size?
How could I get a hold of the pattern?
- Where is the Bias maker available ??? That piece is invaluable in the sewing room.
I found them on Amazon. They are called belt loop makers. I bought the version made for industrial sewing machines and use it on a Singer home machine using just one attachement screw.
Could you be so kind and share the pattern? I would like to download it and try out. Thank ypu ver much! :)
Ich habe das Video leider erst heute entdeckt. Ich wollte mir das Schnittmuster kaufen, leider gibt es dieses anscheinend nicht mehr. Das ist sehr schade. Tolles Video. Liebe Grüße
comment faire pour avoir le patron je voudrais la faire pour mon petit fils et mon fils svp merci
et ou trouver l'appareil qui s'adapte sur votre machine svp merci
Where can I buy the pattern? It is not found amymore in the link.
My husband has a very large head! So what is the biggest size pattern available?
All pattens are the same size I think. But I'll ask a friend how to scale off a patten and get back to you
is the pattern for different head sizes?
Can you give the amount of fabric and interfacing that’s needed.
Still nothing? 🤔
Fiz uma hoje, combo molde que tirei da internet .Deu tudo errado.