'97 Honda Valkyrie DONE! Did we fix it? How's it run? Video #3

Final video on the '97 Valkyrie project, more air cut valve drama (we modify the aftermarket parts!), reassembly of the carbs, tips, hints and things to make your life easier if you're repairing these carbs! Video #3.
The aftermarket air cut valve eBay supplier in case you're interested:
www.ebay.com/i...

[@henryhawk978]

Enjoyed the video, Tom, nice job. Friend has a 2000 Interstate with roughly 125k on it, he runs a automotive tire on the rear and is satisfied. RIDE SAFE OUT THERE!

[@MotoRestoFL]

This thing handles like sh*t. I did take it for a quick test shake. I aired up that blasted darkside rear tire to around 32 and the front to about 40 and I couldn't hardly turn this thing. Handles like a pig. I'll keep further opinions to myself, however, I absolutely would never do this on any bike. Cheers.

[@shaunhardie6077]

WOW, that bike is growling like a LION now, sounds incredible Tom, well done fella, 😎👍.

[@MotoRestoFL]

Thanks. I just wish I had an exhaust air fuel ratio meter. I'd really like to see where these fall on the stoichiometric scale of fuel/air as it's tune now by ear. Alas, I am but a poor pauper motorcycle wrench and as such, cannot afford such luxuries.

[@shaunhardie6077]

It sounded really fit on the video but as you say a gas analyser would be the cherry on the cake just for peace of mind 😌. Keep the videos coming and stay safe Tom.

[@Francey4782]

Liked the music for the carb-assembly time lapse. Good for a Saturday morning trying to take the edge off. 😊

[@MotoRestoFL]

Edge off what? Pictures or it didn't happen!! lol

[@tom27151]

I have 3 valk interstate, my knowledge goes as far that i can do tires and oilchanges/ coolant.
What a knowledge, good for you sir.
Stay safe!

[@MotoRestoFL]

Thank you!

[@DavidElleker]

there are very few mechanics like you about very good

[@MotoRestoFL]

Very kind.

[@petev.9357]

TH-cam doesnt let me say it, but there is a jetting company that has a calculator that Ive used on 4 bikes now Thats great! Also recommended to others and their bike turned out great!
Unless not otherwise stock, it's usually up 1 on main and washer under the needle. gets rid of cold start problems and mid range roll on hesitation, and just more power. No EGA for me either.

[@stevensapyak7971]

10.4.24. The last shot of the Valkyrie running … sounds Schweet👍🏽 You know how to dial in those six carbs, you’re keeping them in the “Game”

[@MotoRestoFL]

If I had an exhaust gas analyzer for fuel/air ratio, I'd be interested to see what the numbers are just from tuning by "ear". They're very expensive and hard to justify at this point. Cheers.

[@stevensapyak7971]

@@MotoRestoFL 10.5.24. I purchased a used Digi Sync tool to balance my carburetors on my four-cylinder GL 1200, it worked sweet👍🏽 it has ports to do a six cylinder vehicle. Actually, the guy I bought it from on eBay used it just for a Honda Valkyrie🤗

[@MotoRestoFL]

@@stevensapyak7971 that’s cool. Synchronization isn’t the problem though a six port unit would be quicker. I’m referring to the desired air fuel percentage or ratio. Cheers.

[@stevensapyak7971]

@@MotoRestoFL 10.5.24. I performed the cylinder drop method and got mine very close. But yes,an exhaust gas analyzer would be the ticket. But you’re so close on that Valkyrie, that you’re kind of splitting atoms! To reach the pinnacle.🤌🏼 FYI I used an ultrasonic bath, coupled with a baking soda blasting of the carburetors and then another round in the ultrasonic bath, when I did my four-cylinder Goldwing. They look brand new. I also used Honda OEM parts.

[@qivarebil2149]

6 into 6 is so sexy! 😍Thanks for this great tutorial!

[@honda3102]

nice work good on ya

[@MotoRestoFL]

Thanks 👍

[@ipfreelynow]

I enjoyed this series with the Valkyrie. What is the purpose of the air cut valves? Are they only on CV carbs?

[@MotoRestoFL]

Yes, to my knowledge they are. They cut off extra air during deceleration mainly, to prevent popping. Richens the mixture at throttle closed position under those circumstances. Otherwise, they are trying to thread the needle on whatever EPA standards there were at the time, but making it run as lean as possible.

[@ipfreelynow]

@@MotoRestoFL Thanks Tom.

[@timlangley8926]

a lot of work