Hi HMG Thank you very much for excellent video> I have one RLSOO isn't working, is too weak, works for one minute only and saw litlee smog coming from the motor. Do you know where can buy the motor 550 555 ? Thanks again.
I have also but unfortunitly it dead becuase of heavy cutt load and now its suply under it is burn when i open it.and its battry is ok 21 volt given to the circuit and circuit then convert it in three wire connected come to motor side .mine have a three wire motor.any soloution sir to inform .i have no circuit
I have a mini chainsaw like this one but it switches off automatically when the blade jumps a little bit, where is the sensor? Can I still run the chainsaw without it?
Thank you for the video. I was going to take mine apart to see if the gears were all metal. I might have to do it anyway because the grease looks like it flings off of the gears, I don't want to run them dry.
Mine lasted about 1hour the cog on the motor strips especially if the chain goes blunt or saw jams while cutting . It's more a toy than a saw their might be better heavy duty ones out with better drive set up .
Just giviving heads up on the v 20 the asemlers who put it together brand new less than two hours on unit no lubrication to bar stripped aluminum gears inside in Spector not doing his job oiler tube to long and folded skink no oil chain and they don't stand behind product you now what I mean good day
What size is the heat sensor? I have one like that but no heat sensor. When used for long, the motor gets very hot and there is smoke.
I have one i changed 3 motors any got fire on long usage
Hi HMG Thank you very much for excellent video> I have one RLSOO isn't working, is too weak, works for one minute only and saw litlee smog coming from the motor. Do you know where can buy the motor 550 555 ? Thanks again.
Thank you - very good demonstration and tear down of the tool
you're welcome
is it better with brushless motor or with brushed motor like this one?
Hello where i can buy the switch replacement ty
I have this drill in the UK, but can't find a battery and charger , makita battery won't fit. Could you link me to one please .
try this link
www.banggood.com/custlink/vvGy6Gste9
I have also but unfortunitly it dead becuase of heavy cutt load and now its suply under it is burn when i open it.and its battry is ok 21 volt given to the circuit and circuit then convert it in three wire connected come to motor side .mine have a three wire motor.any soloution sir to inform .i have no circuit
I thanks your saw is diffrent.i thank its 12volt
Mine cuts off power even on tiny branches, is there any AMP protection that I can remove.
Nice. My mini saw went kaput. Company sending me a new one. Gonna pop it open and see if I can replace the motor. Thanks.
What's the big gear called ?, looking for months, but don't know the name. 🙏
Great Video! Mine is not starting, I guess the motor may be defective, but I dont know.
Is that motor is 555motor ?
Yes, it's 550 motor.
I have a mini chainsaw like this one but it switches off automatically when the blade jumps a little bit, where is the sensor? Can I still run the chainsaw without it?
You can try to remove heat sensor, watch at 5:02
@@HMGCreative removing it and it should run anyway?
Didnt test before, you can try :D
Hi! Could you please tell me what motor is used? Thanks
motor 550 555
@@HMGCreative Thank you so much!
Good video,, is that a resistor connection to the switch and motor,, mine is faulty ,, what ohm is it
It's temperature-sensitive
@@HMGCreative thanks
На шине есть колёсико и это радует
You use this mini chainsaw very carefully love the way.
Yes, thanks
Brpa lama tahan baterai nya?
Thanks for excellent video.
Thank you for the video. I was going to take mine apart to see if the gears were all metal. I might have to do it anyway because the grease looks like it flings off of the gears, I don't want to run them dry.
Gears are all metal, welcome to my channel.
Machinery price
Check description
Mine lasted about 1hour the cog on the motor strips especially if the chain goes blunt or saw jams while cutting . It's more a toy than a saw their might be
better heavy duty ones out with better drive set up .
Thank you
Just got one ty
Гекон кричит)))
Way to much cutting
Just giviving heads up on the v 20 the asemlers who put it together brand new less than two hours on unit no lubrication to bar stripped aluminum gears inside in Spector not doing his job oiler tube to long and folded skink no oil chain and they don't stand behind product you now what I mean good day
aj. laike the bay ,help