How to Install Stretched Saddlebags on a 2015 Harley-Davidson Street Glide | Fat Head Cycles
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- www.fatheadcycles.com | 301.825.9007
This video features the installation of Bad Dad Stretched Side Covers and Competition Saddlebags on a 2015 Harley-Davidson Street Glide.
Part 1: Bad Dad Fender Install: • How to Install a Harle...
After watching the video, please give it a "like" or "dislike" and leave a comment - we'd really appreciate it. Also, we frequently upload new videos so be sure to SUBSCRIBE to our channel so you can be alerted each time we publish a new video.
Interested in purchasing and/or installing side covers and saddlebags for your Harley-Davidson? Give us a call (301.825.9007) or find us online at www.fatheadcycles.com.
Fat Head Cycles is a full service Harley-Davidson customization and repair facility located in Frederick, MD serving the Washington D.C. metropolitan area.
one of the best videos I've seen on youtube , man that was awesome ! watched both videos and had a lot of great info for what i want to do to either my old fatboy or my new road glide ! Thx again man will subscribe to your channel .
I am glad that I could provide you with some information!
Do you have a video on lid installation?
Unfortunately not yet. Thanks for watching
What did you do with your old parts? Thanks for sharing!
How long are the bags from top to bottom? Not the fender... thanks
Awesome video thanks .. well done
Looks amazing. 😁👍
Thank you for the kind words!
Right bag is higher then the left on bottom of bags.Also what can be done to get bags to line up at top and bottom? I have a wide gap at top and narrow on bottom.And no adjustments on bottom rails to adjust.Should I bend the horse shoe bracket that hold rear of fender in the center to bring gap out? Thanks
You running stock front wheel or going up to a 26”/30” front wheel?
Awesome!!! Thank you for sharing..
It is my pleasure!
Awesome. Thanks for sharing
Hinges, have n issue getting my hinges on aftermarket stretched bags!!!
Great video! Thank you
Ok I want the same bags but I'm terrified to buy them because the way my group and I ride we push the corners to a baggers max capability. Should I worry about rubbing or do u recommend taller rear shocks or do they even make taller rear shocks?? Thanks in advance
John Sigman when the bike is at regular ride height there is plenty of clearance. If you are running rear air just ensure that you air up the suspension before taking off. Bad Dad also offers skid plates for these bags. Thank you for watching.
You can see me guessing at it on tic-tok @strdancingstreetglide, Instagram @showtheride, this video has helped mea TON, YOUR set you have from bad dad had all the holes in it, RedFoxx had some holes but not all like yours, do your research people before buying, and chose the best one for you, if your doing it yourself like I am. THANKS AGIAN FOR THIS VIDEO👏👏👏it helped me out a lot!!! Hope this helps some one trying to make a purchase decision about 6down 9out and 8”speakers in the lids. THANK YOU!!!!
All the holes are drilled out on @baddad bag kit👏👏👏RedFox none of the holes are drilled only the garment ones😡. The inside of your @baddad bags are finished much nicer than @redfoxx😡they look raw still, I will have to sand mine down and then coat them with something and add sound barrier and carpet to mine @baddad looks much nicer. I’m in the mock up stage and trying to fit the lids on the bags with out screwing them up cause none of the holes are pre drilled out, only the garment holes are drilled, the fender has four holes drilled out but no Seat bolt hole drilled so I will have to TH-cam and hopefully I can find someone who has done it 🙏🏼🙏🏼so I can learn.
Nice
nice work!!!!!
Instead of using a screwdriver to remove/install the rubber bumpers etc use dish soap instead and they'll slide in & out with no problems.
Great tip!