Wow. Thank you Joe and Ronnie. For all your hard work on my Elvira and The Party Monster pinball machine. She looks great and plays great. I know working on her was a big job, those ramps, plastics, and new ring kit took a long time to do. She now looks like she just came off the showroom floor. Thank you so much. Frank
That machine is just dead sexy... in more ways than one. 😋 Thank you to the owner for letting us see this beautiful machine. And a big thank you to you guys for sharing this work with us. Just awesome.
This is an all out full rebuild and restore. Normally I would say "They are only original once" But I think this game deserves the full treatment. It's a unique and fun design.
It kind of depends on the game for me... the really old ones or the early Solid State ones I think can usually be fixed up without a lot of new replacement stuff, but these 'newer' (they're still 30 years old!) games used a lot of plastic and parts that deteriorate so I can see putting new parts on them. They also make some really high quality repo stuff, this is all made by small companies and it's kind of a labor of love, some of the stuff is hand made by 1 guy who just loves that particular game, etc. I think in this instance it really made the game nicer....
What a cool game. I understand why somebody would spend some cash getting it right. That would be played non stop if you had a party at your house......Nice organ.....
Fantastic fun. It looks great with the new plastics and new ramps. The light show is almost hypnotic. Great job Ron and Joe. Your buddy is gonna love it I think.
On those smaller yellowed plastics it would be interesting to see if retro brighting would bring back the clear finish? Thanks for showing this though. Anything Elvira related gets a big thumbs up from me!!!!! I actually used to own a Scared Stiff. Loved the process of maintaining it and adding mods. Loved that machine.
What a lovely machine, nice work Ron and Joe. I have a large poster of Elvira that i got when visiting the Bally factory during my visit to the Pinball expo in Chicago 30 years ago!
Terrific work as usual. Just my two cents but when you do the final test play, I think playing it without the glass would highlight your work better with less glare and reflection from the back glass.
Goddam I love that game ! So fricken cool ! Nice work guys ! When I’m dealing with the riveted plastics I just drill them out and replace with #6 screws and nuts with a little lock tight so they don’t come apart . To go through the trouble of the rivets and risk breaking them isn’t worth it to me . Plus the screws aren’t really noticeable honestly. Anyways , man I’m jealous! That game is in my top ten , so much fun to play !
Ordered a carb for my mower from Amazon using your link. I’m not the guy that keeps ordering them. Have you seen someone ordering tons of microSD cards? That’s me.
It has to do with how TH-cam pushes videos around (or, they actually pull them into your feed). There is an algorhythm that runs everything, and unfortunately we're in a position where we get more views putting out two videos a week, then we do if we put three videos out a week. It's hard to understand and took us awhile to even start to understand it, but that's how it works. So if we put out three videos a week, LESS people get the opportunity to see them, if we put out two videos a week, MORE people get a chance to see them. We actually earn more money, on two videos, then we do on three videos. Now I know none of that makes any sense, but that's unfortunately how youtube has chose to set up it's algorhythm.
Weird, I never heard her say "Don't touch me there!" Seems like she'd say that at least once a game. Don't remember which trigger that was, but I wonder, is there more than one Elvira pinball game, or is there a sensor that's not working?
Wow. Thank you Joe and Ronnie. For all your hard work on my Elvira and The Party Monster pinball machine. She looks great and plays great. I know working on her was a big job, those ramps, plastics, and new ring kit took a long time to do. She now looks like she just came off the showroom floor. Thank you so much. Frank
Thanks for letting the boys work on it.
It's always our pleasure to work on you, or your father's games Frank. You're a good man, thanks for letting us work on it, we'll see you next time!
Cool pinball machine!
That machine is just dead sexy... in more ways than one. 😋
Thank you to the owner for letting us see this beautiful machine.
And a big thank you to you guys for sharing this work with us. Just awesome.
This is an all out full rebuild and restore. Normally I would say "They are only original once" But I think this game deserves the full treatment. It's a unique and fun design.
It kind of depends on the game for me... the really old ones or the early Solid State ones I think can usually be fixed up without a lot of new replacement stuff, but these 'newer' (they're still 30 years old!) games used a lot of plastic and parts that deteriorate so I can see putting new parts on them. They also make some really high quality repo stuff, this is all made by small companies and it's kind of a labor of love, some of the stuff is hand made by 1 guy who just loves that particular game, etc. I think in this instance it really made the game nicer....
It's the Pinball of Theseus! :-)
@@LyonsArcade Yeah for sure. It's sometimes a hard call, but the "newer" plastics definitely didnt look good for as long as old ones use to
What a cool game. I understand why somebody would spend some cash getting it right. That would be played non stop if you had a party at your house......Nice organ.....
Oooohhh nice organ.! Got to be my favourite of all time
Love the content! Scrubbing bubbles does a great job of cleaning up those old ramps btw.
Fantastic fun. It looks great with the new plastics and new ramps. The light show is almost hypnotic. Great job Ron and Joe. Your buddy is gonna love it I think.
Joe and Ron do the best games!!
On those smaller yellowed plastics it would be interesting to see if retro brighting would bring back the clear finish? Thanks for showing this though. Anything Elvira related gets a big thumbs up from me!!!!! I actually used to own a Scared Stiff. Loved the process of maintaining it and adding mods. Loved that machine.
The 80's games were so cool
Very cool machine! Never played this one but played Scared Stiff a lot!
Must admit that is one cool looking machine!!
What a lovely machine, nice work Ron and Joe. I have a large poster of Elvira that i got when visiting the Bally factory during my visit to the Pinball expo in Chicago 30 years ago!
Ron, Joe! Bravo!! That's some machine. Thanks for the video. Have a good one!!
That has a great sound card
Very stunning machine would love to have one
Looks fun
Always love your thorough videos guys! Not as deep as a Scared Stiff but equally cool in appearance.
I got new parts for my pins in the past. It's always exciting! I appreciate the uploads from you and your brother! Great job!😊
Beautiful game man. Got a Scared Stiff in my arcade and it would be great to get one of these to go next to it.
All I am gonna say is great googley moogley that is a clean machine.
here from the netherlands. This pinball is a long time our favourite pinball at my parents house...... love it!!! Got the 4 player version though
Terrific work as usual. Just my two cents but when you do the final test play, I think playing it without the glass would highlight your work better with less glare and reflection from the back glass.
I don't like playing them without glass on them, i'm not concerned with whether or not there's glare on the glass
Very nice🎉
Hey Ron!! Hey Joe!!
Hey Jason!
Man! That there is a company out there still making parts kits for years old pinball games is amazing!
Great video by the way!
Elvira
My heart's on fire for Elvira
Giddy up, um-poppa-um-poppa, mow, mow
Giddy up, um-poppa-um-poppa, mow, mow
High-ho silver, away
I actually met her in person at a Horror movie convention a few years ago. She still looks amazing! And what a nice woman to boot !
This era was Bally/Williams at their best. Such a great machine for the system 11 era it was created in.
Elvira passed us by in this part of Europe but that still looks lots of fun to play.
We got some in Europe, UK anyway. 4,500 production run Worldwide never seems like many to me.
Goddam I love that game ! So fricken cool ! Nice work guys ! When I’m dealing with the riveted plastics I just drill them out and replace with #6 screws and nuts with a little lock tight so they don’t come apart . To go through the trouble of the rivets and risk breaking them isn’t worth it to me . Plus the screws aren’t really noticeable honestly. Anyways , man I’m jealous! That game is in my top ten , so much fun to play !
Ordered a carb for my mower from Amazon using your link. I’m not the guy that keeps ordering them. Have you seen someone ordering tons of microSD cards? That’s me.
I have, I was wondering who the microSD guy was, I figured they just had a heck of a sale for the last year or two, LOL! Thank you geeteoh1!
Hi from Brooklyn
Have the Video she was brilliant on pinball as well😊
👍👍
I miss the Mon,Wed &Fri video schedule!! Just saying. Still love all the videos, just wish there was more.
It has to do with how TH-cam pushes videos around (or, they actually pull them into your feed). There is an algorhythm that runs everything, and unfortunately we're in a position where we get more views putting out two videos a week, then we do if we put three videos out a week. It's hard to understand and took us awhile to even start to understand it, but that's how it works. So if we put out three videos a week, LESS people get the opportunity to see them, if we put out two videos a week, MORE people get a chance to see them. We actually earn more money, on two videos, then we do on three videos.
Now I know none of that makes any sense, but that's unfortunately how youtube has chose to set up it's algorhythm.
THAT TABLE IS S L I C K .
She has some bright LEDs
I was quite impressed by her Bumpers. Or are we talking about the table?
I like Party Monsters, but I like Scared Stiff better.
What's the deal on miss universe?
Patiently waiting for us to fix it eventually
Your not a pinball wizard lol.. great game i would love to own it...
Weird, I never heard her say "Don't touch me there!" Seems like she'd say that at least once a game. Don't remember which trigger that was, but I wonder, is there more than one Elvira pinball game, or is there a sensor that's not working?
Yodelayheehoo
Yodelayheehoo!!!