What a beautiful view! Good stuff, and a great way to start the day, thank u. What you are seeing is the Husqvarna "Quad Port" design vs.. the two transfers AND for what ever reason those g395's just really are STRONG. Mine sure is, and it pretty much toasts my 394. And even beats the 395 converted 394 with a Hyway big bore top end. Go figure. Interesting your finding those g395's are something special as well :)
Thanks Walt! What is the squish of the big bore 395 from Hyway? It is Titanikel version? I must convert my 394, the cylinder is scored... All the best!
@@poparamiro Didn't measure as it was too hard for me to pull over stock. Why did the 395 score? I've got a lot of time on mine w/o issue so far BUT I swapped out the piston pdq. Wonder if yours had the rattler pistons.
@@poparamiro I misunderstood, u have a 394 needing a cylinder NOT the g395 :), Yeah so far I like the look of the Hyway. Did have to play a few games with the carburetor situation. Right now I have a AM carb for a 395 on the 394
Superb .... Adevărat spectacol ! Dacă la originale 395 este greu de întrecut la categoria 90 CC iată că și la clone se întâmplă la fel. Viteza de tăiere și un cuplu mai bun a făcut diferența aici . Oricum sunt niște drujbe uimitoare ambele . Originalele după care sunt clonate sunt in mare amenințare și asta e foarte bine pentru noi toți datorită prețului cu care se pot achiziționa .
When it comes down to sure speed on cutting a tree up stihl has always been slower than husqvarna I like them both ran them both and each and ever time same size saws or really close to same size the husqvarna always had the pure speed advantage low end pulling torque maybe the stihl has a little more
What a beautiful view! Good stuff, and a great way to start the day, thank u. What you are seeing is the Husqvarna "Quad Port" design vs.. the two transfers AND for what ever reason those g395's just really are STRONG. Mine sure is, and it pretty much toasts my 394. And even beats the 395 converted 394 with a Hyway big bore top end. Go figure. Interesting your finding those g395's are something special as well :)
Thanks Walt!
What is the squish of the big bore 395 from Hyway?
It is Titanikel version?
I must convert my 394, the cylinder is scored...
All the best!
@@poparamiro Didn't measure as it was too hard for me to pull over stock. Why did the 395 score? I've got a lot of time on mine w/o issue so far BUT I swapped out the piston pdq. Wonder if yours had the rattler pistons.
I bought the 394 in great condition, except the cylinder.
I will check the g395 piston, but i did not hear any ratling or strange sound...
@@poparamiro I misunderstood, u have a 394 needing a cylinder NOT the g395 :), Yeah so far I like the look of the Hyway. Did have to play a few games with the carburetor situation. Right now I have a AM carb for a 395 on the 394
Superb .... Adevărat spectacol ! Dacă la originale 395 este greu de întrecut la categoria 90 CC iată că și la clone se întâmplă la fel. Viteza de tăiere și un cuplu mai bun a făcut diferența aici . Oricum sunt niște drujbe uimitoare ambele . Originalele după care sunt clonate sunt in mare amenințare și asta e foarte bine pentru noi toți datorită prețului cu care se pot achiziționa .
Bine spus!
Toate cele bune!
395 și la categoria chineză tot regină rămâne. Te salut maestre și duminică plăcută 🤝🙋♂️
Salutare si toate cele bune!
Uite ca și clonatele merg ff bine, nu trebuie neapărat drujbe din Berlin din magazin🤣. Spor la treabă să ai și Duminică făină în continuare 🤝🤝🤝
Multumesc!
Din Berlin trebuie altceva....
Numai bine!
Man those G395 rip! Love your videos!
Thanks for watching!
All the best!
Impresionat cum merg aceste drujbe, dar 395 a rupt norma. Faine felii, te salut !
Salutare si toate cele bune!
Peace be with you. Thanks for completing my fallen tree video. Useful stuff! Great content...
See you around.
Thanks for watching and comment!
Im planning on buying a holzfforma within the next week or so..
Which is best to go for?
G395XP or the G660?!?!
Which has most power, and reliability?
I like both...
With some mods both are great, can not say wich is more reliable, g395 has a little more power.
G660 pro, why not G395 pro?
They don't make one yet..
When it comes down to sure speed on cutting a tree up stihl has always been slower than husqvarna I like them both ran them both and each and ever time same size saws or really close to same size the husqvarna always had the pure speed advantage low end pulling torque maybe the stihl has a little more
Thanks for watching and comment!
Di antara mesin itu. Yang mana paling bagus tenaganya kawan 👍
Both are good, g395 a little faster.
All the best!
Супер бензопили Маріо а на твій погляд що краще штиль 361 чи хусварна 365 зроби таке відео
Ms 361 is a great saw, so the 365 special
Thanks for watching and best regards!
💯💯💯👍👍👍🤝🤝🤝
🤝🤝🤝
so the 395 is quite abit stronger than the g660?
Not much stronger, both good...
Thanks for watching and best regards!
@@poparamiro do u have any pros and cons on them? the husky is a tiny bit heavier but it is faster at cutting right?
ดีทั้งสองเเบบ ดีมากสำหรับผม
True, best regards!
how are they now??
Did not cut much with them...
Thanks for watching!
👍👍
🤝🤝🤝
i have to buy g395. I need you to record my ms880, it only has 8 hours of operation, so it's brand new 🤣😂
G395 is a lot of fun...
🤝🤝🤝
@@poparamiro
surely. I adore 394 395 those chicks are legends 💪💪
🤝👍👍👍
🤝🤝🤝
👍👍👍🤘🤘🙏🙏🙏
🤝🤝🤝
Superbe!!
Numai bine si spor!